Analyses of Effects of Cutting Parameters on Cutting Edge Temperature Using Inverse Heat Conduction Technique

Figure 7

Chip-tool contact area for the following conditions: (a) 𝑎𝑝=1.0 mm, 𝑓=0.138 mm/rot, and 𝑉𝑐 variable; (b) 𝑓=0.138 mm/rot, 𝑉𝑐=56 m/min, and 𝑎𝑝 variable; (c) 𝑎𝑝 = 1.0 mm, 𝑉𝑐 = 56 m/min, and 𝑓 variable.

(a)

(b)

(c)