Analyses of Effects of Cutting Parameters on Cutting Edge Temperature Using Inverse Heat Conduction Technique

Table 2

Thermocouple locations following the coordinate system defined in Figure 1.

Position	Thermocouple
	1	2	3	4	5
𝑥 (mm)	0.61	2.70	0.0	3.30	2.00
𝑦 (mm)	7.20	8.50	9.0	7.00	3.40
𝑧 (mm)	0.0	0.0	5.0	9.50	9.50