Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 916951, 14 pages
http://dx.doi.org/10.1155/2014/916951
Research Article

Mathematical Model of Hybrid Precast Gravity Frames for Smart Construction and Engineering

1Department of Architectural Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 446-701, Republic of Korea
2Australasian Joint Research Centre for Building Information Modelling, Curtin University, GPO Box U1987, Perth, WA 6845, Australia
3Department of Housing and Interior Design, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 446-701, Republic of Korea

Received 28 February 2014; Revised 4 April 2014; Accepted 1 May 2014; Published 27 August 2014

Academic Editor: Changzhi Wu

Copyright © 2014 Seon-Chee Park et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. F. Hajjar, “Composite steel and concrete structural systems for seismic engineering,” Journal of Constructional Steel Research, vol. 58, no. 5–8, pp. 703–723, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Fabbrocino, G. Manfredi, and E. Cosenza, “Ductility of composite beams under negative bending: an equivalence index for reinforcing steel classification,” Journal of Constructional Steel Research, vol. 58, no. 2, pp. 185–202, 2001. View at Google Scholar
  3. B. Yang and K. Tan, “Behaviour of composite beam-column joints under a middle-column-removal scenario: experimental tests,” Journal of Structural Engineering, vol. 140, no. 2, Article ID 04013045, 2014. View at Google Scholar
  4. L. Tesser and R. Scotta, “Flexural and shear capacity of composite steel truss and concrete beams with inferior precast concrete base,” Engineering Structures, vol. 49, pp. 135–145, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. H. J. Hwang, H. G. Park, C. H. Lee et al., “Seismic resistance of concrete-filled U-shaped steel beam-to-RC column connections,” Journal of Korean Society of Steel Construction, vol. 23, pp. 83–97, 2011. View at Google Scholar
  6. J. Hassan and B. Khosrow, “Nonlinear seismic behavior evaluation of ductile beam-column connections in precast concrete,” International Journal of Civil and Structural Engineering, vol. 1, pp. 445–453, 2011. View at Google Scholar
  7. A. M. Ioani and E. Tripa, “Structural behavior of an innovative all-precast concrete dual system for residential buildings,” PCI Journal, vol. 57, no. 1, pp. 110–123, 2012. View at Google Scholar · View at Scopus
  8. C. Chou and C. Uang, “Effects of continuity plate and transverse reinforcement on cyclic behavior of SRC moment connections,” Journal of Structural Engineering, vol. 133, no. 1, pp. 96–104, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. K. Ju and S. D. Kim, “Structural behavior of alternative low floor height system using structural “tee,” half precast concrete, and horizontal stud,” Canadian Journal of Civil Engineering, vol. 32, no. 2, pp. 329–338, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Wang, M. Truijens, L. Hou, Y. Wang, and Y. Zhou, “Integrating augmented reality with building information modeling: onsite construction process controlling for liquefied natural gas industry,” Automation in Construction, vol. 40, pp. 96–105, 2014. View at Publisher · View at Google Scholar
  11. L. Hou, Y. Wang, X. Wang et al., “Combining photogrammetry and augmented reality towards an integrated facility management system for the oil industry,” Proceedings of the IEEE, vol. 102, no. 2, pp. 204–220, 2014. View at Google Scholar
  12. L. Hou, X. Wang, L. Bernold, and P. E. D. Love, “Using animated augmented reality to cognitively guide assembly,” Journal of Computing in Civil Engineering, vol. 27, no. 5, pp. 439–451, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Wang, X. Wang, J. Wang, P. Yung, and G. Jun, “Engagement of facilities management in design stage through BIM: framework and a case study,” Advances in Civil Engineering, vol. 2013, Article ID 189105, 8 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. W. K. Hong, J. M. Kim, S. C. Park et al., “A new apartment construction technology with effective CO2 emission reduction capabilities,” Energy, vol. 35, no. 6, pp. 2639–2646, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. W. Hong, S. Park, J. Kim et al., “Development of structural composite hybrid systems and their application with regard to the reduction of CO2 emissions,” Indoor and Built Environment, vol. 19, no. 1, pp. 151–162, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. W. Hong, S. Jeong, S. Park, and J. T. Kim, “Experimental investigation of an energy-efficient hybrid composite beam during the construction phase,” Energy and Buildings, vol. 46, pp. 37–47, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. G. P. Hammond and C. I. Jones, Inventory of Carbon & Energy (ICE), Department of Mechanical Engineering, University of Bath, Bath, UK, 2008.
  18. G. P. Hammond and C. I. Jones, “Embodied energy and carbon in construction materials,” Proceedings of Institution of Civil Engineers: Energy, vol. 161, no. 2, pp. 87–98, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. National Institute of Environment Research (NIER): Domestic and foreign cement heavy metal analysis result (May 2013), NIER, 2013, http://www.nier.go.kr/eric/portal/kor/nf/nier-nf-02.page.
  20. S. Kim, W. Hong, J. Kim, and J. T. Kim, “The development of modularized construction of enhanced precast composite structural systems (Smart Green frame) and its embedded energy efficiency,” Energy and Buildings, vol. 66, pp. 16–21, 2013. View at Publisher · View at Google Scholar · View at Scopus