Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 918795, 9 pages
http://dx.doi.org/10.1155/2014/918795
Research Article

A Sensitivity Analysis Approach to Identify Key Environmental Performance Factors

1DISP Laboratory, Lumière University Lyon 2, 160 boulevard de l’Université, 69676 Bron Cedex, France
2Computer Science Department, Faculty of Engineering, Qatar University and ictQATAR, P.O. Box 2731, Doha, Qatar
3School of Mechanical and Power Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China

Received 12 November 2013; Revised 10 February 2014; Accepted 24 February 2014; Published 30 March 2014

Academic Editor: Panos Liatsis

Copyright © 2014 Xi Yu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Rebitzer, T. Ekvall, R. Frischknecht et al., “Life cycle assessment: part 1: framework, goal and scope definition, inventory analysis, and applications,” Environment International, vol. 30, no. 5, pp. 701–720, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Brezet, Ecodesign: A Promising Approach to Sustainable Production and Consumption, UNEP, Delft, The Netherlands, 1997.
  3. T. E. Graedel and B. R. Allenby, Design for Environment, Prentice Hall, Upper Saddle River, NJ, USA, 1996.
  4. W. Wende, A. Bond, N. Bobylev, and L. Stratmann, “Climate change mitigation and adaptation in strategic environmental assessment,” Environmental Impact Assessment Review, vol. 32, no. 1, pp. 88–93, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. L. A. Sandham and H. M. Pretorius, “A review of EIA report quality in the North West province of South Africa,” Environmental Impact Assessment Review, vol. 28, no. 4-5, pp. 229–240, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. C. Luttropp and J. Lagerstedt, “EcoDesign and The Ten Golden Rules: generic advice for merging environmental aspects into product development,” Journal of Cleaner Production, vol. 14, no. 15-16, pp. 1396–1408, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. ISO14040, “Environmental management—life cycle assessment—principles and framework,” Environmental Management 3, 2006. View at Google Scholar
  8. S. Siddhaye and P. Sheng, “Environmental impact and design parameters in electronics manufacturing - a sensitivity analysis approach,” in Proceedings of the IEEE International Symposium on Electronics and the Environment (ISEE '00), pp. 39–45, October 2000. View at Scopus
  9. R. Heijungs and S. Suh, The Computational Structure of Life Cycle Assessment, Springer, 2002.
  10. H. S. Yoon, B. Bhandari, J. S. Moon et al., “Energy analysis of micro-drilling process used to manufacture printed circuit boards,” in Leveraging Technology for a Sustainable World, pp. 305–309, Springer, 2012. View at Google Scholar
  11. S. Siddhaye and P. Sheng, “Integration of environmental factors in process modeling for printed circuit board manufacturing, part II: fabrication,” in Proceedings of the 5th IEEE International Symposium on Electronics and the Environment (ISEE '97), pp. 226–233, May 1997. View at Scopus
  12. S. Siddhaye and P. Sheng, “Evaluating environmental factors for pre-layout board design,” in Proceedings of the IEEE International Symposium on Electronics and the Environment (ISEE '98), pp. 99–105, May 1998. View at Scopus
  13. J. Wang, X. Chen, J. Li, and Z. Lv, “Developing indoor air quality through healthcare and sustainable parametric method,” in Proceedings of the 4th International Conference on Bioinformatics and Biomedical Engineering (iCBBE '10), June 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Heijungs, “A generic method for the identification of options for cleaner products,” Ecological Economics, vol. 10, no. 1, pp. 69–81, 1994. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Suh and G. Huppes, “Methods for life cycle inventory of a product,” Journal of Cleaner Production, vol. 13, no. 7, pp. 687–697, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Suyang and J. Liu, Life cycle assessment on Autoliv’s electronic control unit [M.S. thesis], Chalmers University of Technology, 2010, master: 432.
  17. IPC, “World PCB Production Report for the Year 2012,” http://www.ipc.org/ContentPage.aspx?pageid=World-PCB-Market-Grew-in-2012.
  18. P. Worhach and P. Sheng, “Integration of environmental factors in process modeling for printed circuit board manufacturing, part I: assembly,” in Proceedings of the 5th IEEE International Symposium on Electronics and the Environment (ISEE '97), pp. 218–225, May 1997. View at Scopus
  19. R. K. Kanth, P. Liljeberg, H. Tenhunen, Q. Wan, and L. Zheng, “Insight into quantitative environmental emission analysis of printed circuit board,” in Proceedings of the 10th International Conference on Environment and Electrical Engineering (EEEIC '11), May 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. I. K. Hui, C. P. Li, and H. C. W. Lau, “Hierarchical environmental impact evaluation of a process in printed circuit board manufacturing,” International Journal of Production Research, vol. 41, no. 6, pp. 1149–1165, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. F. W. Kirsch, Waste Minimization Assessment for Multilayered Printed Circuit Board Manufacturing, U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1991.
  22. R. Xiong, Life cycle assessment methods used to achieve cleaner production of printed circuit boards [M.S. thesis], Guangdong University of Technology, 2008.
  23. X.-X. Yang, “How to promote the cleaner production in PCB factories,” Printed Circuit Information, pp. 54–60, 2010. View at Google Scholar
  24. C. Zhao, “Double sided printed circuit board hole of electrochemistry aggradation technics and wastewater quantity compute,” Inner Mongolia Environmental Sciences, no. 3, pp. 163–165, 2012. View at Google Scholar