Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 926727, 10 pages
http://dx.doi.org/10.1155/2014/926727
Research Article

Development of Digital Control for High Power Permanent-Magnet Synchronous Motor Drives

Department of Electrical Engineering, Ming Chi University of Technology, 84 Gungjuan Road, Taishan District, New Taipei City 24301, Taiwan

Received 13 April 2014; Accepted 10 May 2014; Published 2 June 2014

Academic Editor: Her-Terng Yau

Copyright © 2014 Ming-Hung Chen and Hao-Ting Tseng. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. V. Sant, K. R. Rajagopal, and N. K. Sheth, “Permanent magnet synchronous motor drive using hybrid PI speed controller with inherent and noninherent switching functions,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4088–4091, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. Zhang and J. Zhu, “A novel duty cycle control strategy to reduce both torque and flux ripples for DTC of permanent magnet synchronous motor drives with switching frequency reduction,” IEEE Transactions on Power Electronics, vol. 26, no. 10, pp. 3055–3067, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Zhang, J. Zhu, W. Xu, and Y. Guo, “A simple method to reduce torque ripple in direct torque-controlled permanent-magnet synchronous motor by using vectors with variable amplitude and angle,” IEEE Transactions on Industrial Electronics, vol. 58, no. 7, pp. 2848–2859, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Zhu, X. Xiao, and Y. Li, “Torque ripple reduction of the torque predictive control scheme for permanent-magnet synchronous motors,” IEEE Transactions on Industrial Electronics, vol. 59, no. 2, pp. 871–877, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Zhao, T. A. Lipo, and B.-I. Kwon, “A novel two-phase permanent magnet synchronous motor modeling for torque ripple minimization,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2355–2358, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Zhang and J. Zhu, “Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency,” IEEE Transactions on Power Electronics, vol. 26, no. 1, pp. 235–248, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. T.-C. Jeong, W.-H. Kim, M.-J. Kim et al., “Current harmonics loss analysis of 150-kW traction interior permanent magnet synchronous motor through co-analysis of d-q axis current control and finite element method,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2343–2346, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Q. Wei, B. Zhang, D. Y. Qiu, and X. S. Luo, “Effects of current time-delayed feedback on the dynamics of a permanent-magnet synchronous motor,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 57, no. 6, pp. 456–460, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Ortega, L. Praly, A. Astolfi, J. Lee, and K. Nam, “Estimation of rotor position and speed of permanent magnet synchronous motors with guaranteed stability,” IEEE Transactions on Control Systems Technology, vol. 19, no. 3, pp. 601–614, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Ge, C. Wang, X. Zhou, and H. Wang, “Research on rotor position sensing of a permanent magnet synchronous motor based on high-frequency voltage injection and Kalman filter,” in Proceedings of the International Conference on Electrical and Control Engineering (ICECE '10), pp. 1750–1754, June 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. Lei, X. Fei, S. Jian-qing, C. Ming-liang, S. Qiao-ming, and Q.-F. Li, “Sensorless control of high-power interior permanentmagnet synchronous motor drives at very low speed,” IET Electric Power Applications, vol. 7, no. 3, pp. 199–206, 2013. View at Publisher · View at Google Scholar