Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014 (2014), Article ID 973680, 7 pages
http://dx.doi.org/10.1155/2014/973680
Research Article

Surface Thermal Insulation and Pipe Cooling of Spillways during Concrete Construction Period

1Department of Structures and Materials, China Institute of Water Resources and Hydropower Research, Beijing 100038, China
2Henan Yellow River Reconnaissance, Design and Research Institute, Beijing Branch, Beijing 100073, China

Received 7 March 2014; Revised 7 June 2014; Accepted 7 June 2014; Published 7 July 2014

Academic Editor: Cheng Shao

Copyright © 2014 Wang Zhenhong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. K. Schindler, B.S.E., M.S.E. Concrete Hydration, Temperature Development, and Setting at Early-Ages, The University of Texas at Austin, 2002.
  2. C. D. Atiş, “Heat evolution of high-volume fly ash concrete,” Cement and Concrete Research, vol. 32, no. 5, pp. 751–756, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. A. K. Schindler, B. F. McCullough, and T. S. Krauss, “The design of a high performance concrete pavement in the Waco District, Texas,” Research Report 0215-1F, The Center for Transportation Research, The University of Texas at Austin, 1999. View at Google Scholar
  4. V. G. Papadakis, “Effect of fly ash on Portland cement systems. Part II. High-calcium fly ash,” Cement and Concrete Research, vol. 30, no. 10, pp. 1647–1654, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Tsimas and A. Moutsatsou-Tsima, “High-calcium fly ash as the fourth constituent in concrete: problems, solutions and perspectives,” Cement & Concrete Composites, vol. 27, no. 2, pp. 231–237, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. B.-F. Zhu, Thermal Stresses and Temperature Control of Mass Concrete, China Electric Power Press, Beijing, China, 1998.
  7. M. S. Konsta-Gdoutos and S. P. Shah, “Hydration and properties of novel blended cements based on cement kiln dust and blast furnace slag,” Cement and Concrete Research, vol. 33, no. 8, pp. 1269–1276, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. R. C. Tank and N. J. Carino, “Rate constant functions for strength development of concrete,” ACI Materials Journal, vol. 88, no. 1, pp. 74–83, 1991. View at Google Scholar · View at Scopus
  9. B. Sioulas and J. G. Sanjayan, “Hydration temperatures in large high-strength concrete columns incorporating slag,” Cement and Concrete Research, vol. 30, no. 11, pp. 1791–1799, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. S. P. Senadheera and D. G. Zollinger, “Influence of coarse aggregate in Portland Cement Concrete on spalling of concrete pavements,” Research Report 1244-11, Texas Transportation Institute, College Station, Texas, Tex, USA, 1994. View at Google Scholar
  11. M. I. Sánchez de Rojas and M. Frías, “The pozzolanic activity of different materials, its influence on the hydration heat in mortars,” Cement and Concrete Research, vol. 26, no. 2, pp. 203–213, 1996. View at Publisher · View at Google Scholar · View at Scopus
  12. Z. P. Bazant and W. P. Murphy, “Creep and shrinkage prediction model for analysis and design of concrete structures—model B3,” Materiaux et Constructions, vol. 28, no. 180, pp. 357–365, 1995. View at Google Scholar · View at Scopus
  13. H. Zanni, M. Cheyrezy, V. Maret, S. Philippot, and P. Nieto, “Investigation of hydration and pozzolanic reaction in reactive powder concrete (RPC) using 29Si NMR,” Cement and Concrete Research, vol. 26, no. 1, pp. 93–100, 1996. View at Publisher · View at Google Scholar · View at Scopus
  14. L. J. Parrot, “Factors influencing relative humidity in concrete,” Magazine of Concrete Research, vol. 43, no. 154, 1991. View at Google Scholar
  15. M. J. Shannag and A. Yeginobali, “Properties of pastes, mortars and concretes containing natural pozzolan,” Cement and Concrete Research, vol. 25, no. 3, pp. 647–657, 1995. View at Publisher · View at Google Scholar · View at Scopus
  16. B. F. McCullough and R. O. Rasmussen, “Fast-track paving: concrete temperature control and traffic opening criteria for bonding concrete overlays, volume 1,” Final Report FHWA-RD-98-167, U.S Department of Transportation, Washington, DC, USA, 1999. View at Google Scholar
  17. Z. Wang, G. Zhang, and Y. Liu, “Study on the application of cooling pipe in thin-walled concrete structure,” Advanced Materials Research, vol. 163–167, pp. 1107–1110, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. Z.-M. Zhang, X.-W. Guo, and R.-Q. Du, “Analysis of hydration heat-induced stresses and cracks in massive concrete walls,” Journal of Hohai University, vol. 30, no. 5, pp. 12–16, 2002. View at Google Scholar
  19. D. Lelièvre, V. Nicolas, and P. Glouannec, “Numerical modelling of heat and mass transfer in porous materials during drying and shrinkage,” in Proceedings of the COMSOL Conference, Milan, Italy, 2012.
  20. W. J. Green, R. L. Carrasquillo, and B. F. McCullough, “Coarse aggregate for PCC—pilot study evaluation,” Research Report 422-1, Center for Transportation Research, The University of Texas at Austin, September 1987. View at Google Scholar
  21. F. Zhu and K. Li, “Modeling heat and moisture transfer within porous textiles under high temperature gradients,” Advanced Materials Research, vol. 455-456, pp. 1136–1139, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. H. Wang, Y. M. Zhu, S. Yu, and F. Wang, “Simulation and analysis of temperature field and stress field of sluice pier concrete during construction,” Journal of Tianjin University Science and Technology, vol. 41, no. 4, pp. 476–481, 2008. View at Google Scholar · View at Scopus