Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015 (2015), Article ID 103507, 9 pages
http://dx.doi.org/10.1155/2015/103507
Research Article

Modeling of the Feed-Motor Transient Current in End Milling by Using Varying-Coefficient Model

1State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
2School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

Received 4 July 2014; Accepted 16 October 2014

Academic Editor: Ivanka Stamova

Copyright © 2015 Mi Xiao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Cica, B. Sredanovic, G. Lakic-Globocki, and D. Kramar, “Modeling of the cutting forces in turning process using various methods of cooling and lubricating: an artificial intelligence approach,” Advances in Mechanical Engineering, vol. 2013, Article ID 798597, 8 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Quintana and J. Ciurana, “Chatter in machining processes: a review,” International Journal of Machine Tools and Manufacture, vol. 51, no. 5, pp. 363–376, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Rizal, J. A. Ghani, M. Z. Nuawi, and C. H. C. Haron, “Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system,” Applied Soft Computing Journal, vol. 13, no. 4, pp. 1960–1968, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Chandrasekaran, M. Muralidhar, C. M. Krishna, and U. S. Dixit, “Application of soft computing techniques in machining performance prediction and optimization: a literature review,” International Journal of Advanced Manufacturing Technology, vol. 46, no. 5–8, pp. 445–464, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Moghri, M. Madic, M. Omidi, and M. Farahnakian, “Surface roughness optimization of polyamide-6/nanoclay nanocomposites using artificial neural network: genetic algorithm approach,” The Scientific World Journal, vol. 2014, Article ID 485205, 7 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. Q. Ren, M. Balazinski, K. Jemielniak, L. Baron, and S. Achiche, “Experimental and fuzzy modelling analysis on dynamic cutting force in micro milling,” Soft Computing, vol. 17, no. 9, pp. 1687–1697, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Gokulachandran and K. Mohandas, “Comparative study of two soft computing techniques for the prediction of remaining useful life of cutting tools,” Journal of Intelligent Manufacturing, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. M. V. Cakir, O. Eyercioglu, K. Gov, M. Sahin, and S. H. Cakir, “Comparison of soft computing techniques for modelling of the EDM performance parameters,” Advances in Mechanical Engineering, vol. 2013, Article ID 392531, 15 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. I. Zohourkari, M. Zohoor, and M. Annoni, “Investigation of the effects of machining parameters on material removal rate in abrasive waterjet turning,” Advances in Mechanical Engineering, vol. 2014, Article ID 624203, 11 pages, 2014. View at Publisher · View at Google Scholar
  10. A. B. Sharkawy, “Prediction of surface roughness in end milling process using intelligent systems: a comparative study,” Applied Computational Intelligence and Soft Computing, vol. 2011, Article ID 183764, 18 pages, 2011. View at Publisher · View at Google Scholar
  11. S. Aggarwal, N. Nešić, and P. Xirouchakis, “Cutting torque and tangential cutting force coefficient identification from spindle motor current,” International Journal of Advanced Manufacturing Technology, vol. 65, no. 1–4, pp. 81–95, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. H. Jeong and D. W. Cho, “Estimating cutting force from rotating and stationary feed motor currents on a milling machine,” International Journal of Machine Tools and Manufacture, vol. 42, no. 14, pp. 1559–1566, 2002. View at Publisher · View at Google Scholar · View at Scopus
  13. D. Kim and D. Jeon, “Fuzzy-logic control of cutting forces in CNC milling processes using motor currents as indirect force sensors,” Precision Engineering, vol. 35, no. 1, pp. 143–152, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Xu and C. Jie, “Research on the relationship between CNC machine tool spindle current and cutting parameters,” Machinery, vol. 12, pp. 28–30, 2010. View at Google Scholar
  15. G. Dudek, “Tournament searching method for optimization of the forecasting model based on the Nadaraya-Watson estimator,” Artificial Intelligence and Soft Computing, vol. 8468, pp. 339–348, 2014. View at Google Scholar
  16. H. Long and L. Qian, “Nadaraya-Watson estimator for stochastic processes driven by stable Lévy motions,” Electronic Journal of Statistics, vol. 7, pp. 1387–1418, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  17. M. Avery, Literature Review for Local Polynomial Regression, 2013, http://www4.ncsu.edu/~mravery/AveryReview2.pdf.
  18. A. Donnelly, B. Misstear, and B. Broderick, “Application of nonparametric regression methods to study the relationship between NO2 concentrations and local wind direction and speed at background sites,” Science of the Total Environment, vol. 409, no. 6, pp. 1134–1144, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Li, T. Yan, and L. Su, “Solution of an integral-differential equation arising in oscillating magnetic fields using local polynomial regression,” Advances in Mechanical Engineering, vol. 2014, Article ID 101230, 9 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Valentinčič and M. Junkar, “Detection of the eroding surface in the EDM process based on the current signal in the gap,” The International Journal of Advanced Manufacturing Technology, vol. 28, no. 3-4, pp. 294–301, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Munoz-Sánchez, I. M. González-Farias, X. Soldani, and M. H. Miguélez, “Hybrid FE/ANN and LPR approach for the inverse identification of material parameters from cutting tests,” International Journal of Advanced Manufacturing Technology, vol. 54, no. 1–4, pp. 21–33, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. B. U. Park, E. Mammen, Y. K. Lee, and E. R. Lee, “Varying coefficient regression models: a review and new developments,” International Statistical Review, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Fan and W. Zhang, “Statistical methods with varying coefficient models,” Statistics and Its Interface, vol. 1, no. 1, pp. 179–195, 2008. View at Publisher · View at Google Scholar · View at MathSciNet
  24. W. Härdle and E. Mammen, “Comparing nonparametric versus parametric regression fits,” The Annals of Statistics, vol. 21, no. 4, pp. 1926–1947, 1993. View at Publisher · View at Google Scholar · View at MathSciNet
  25. S. Arlot and A. Celisse, “A survey of cross-validation procedures for model selection,” Statistics Surveys, vol. 4, pp. 40–79, 2010. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  26. I. H. Witten, E. Frank, and M. A. Hall, Data Mining: Practical Machine Learning Tools and Techniques, China Machine Press, Beijing, China, 3rd edition, 2012.