Study and Simulation of Deformation Mechanics Modeling of Flexible Workpiece Processing by Rayleigh-Ritz Method

Table 1

The comparison between theoretical value and measured value of flexible part deformation.

Serial number	- plane coordinates (mm)	Theoretical value (mm)	Measured (mm)	Relative deviation (%)
1	(112.5, 75)	3.918	4.242	7.63
2	(37.5, 75)	3.916	4.135	5.29
3	(37.5, 25)	3.973	3.767	5.46
4	(112.5, 25)	3.262	3.211	1.58
5	(75, 50)	7.508	7.207	4.17
6	(0, 50)	2.795	2.624	6.51
7	(150, 50)	3.815	4.142	7.89
Average				5.51