Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015 (2015), Article ID 176893, 11 pages
http://dx.doi.org/10.1155/2015/176893
Research Article

Interring Gas Dynamic Analysis of Piston in a Diesel Engine considering the Thermal Effect

1College of Power and Energy Engineering, Harbin Engineering University, Harbin, Heilongjiang 150001, China
2Washington University in St. Louis, St. Louis, MO 63108, USA

Received 28 August 2014; Accepted 10 November 2014

Academic Editor: Woo-Young Jung

Copyright © 2015 Wanyou Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. L. Ting and J. E. Mayer, “Piston ring lubrication and cylinder bore wear analysis, part I—theory,” Journal of Lubrication Technology, vol. 96, pp. 305–314, 1974. View at Google Scholar
  2. L. L. Ting and J. E. Mayer, “Piston ring lubrication and cylinder bore wear analysis, part II—theory verification,” Journal of Tribology, vol. 96, no. 2, pp. 258–266, 1974. View at Publisher · View at Google Scholar
  3. D. Dowson, P. N. Economou, and B. L. Ruddy, “Piston ring lubrication-part II: theoretical analysis of a single ring and complete ring pack,” in Energy Conservation Through Fluid Film Lubrication Technology: Frontiers in Research and Design—Winter Annual Meeting of the ASME, pp. 23–52, 1979. View at Google Scholar
  4. B. L. Ruddy, D. Dowson, and P. N. Economou, “Piston ring lubrication, Part III: the influence of ring dynamics and ring twist,” in Proceedings of the Winter Annual Meeting of ASME: Energy Conservation Through Fluid Film Lubrication Technology: Frontiers in Research and Design, pp. 191–215, 1979.
  5. B. L. Ruddy, D. Dowson, and P. N. Economou, “A theoretical analysis of the twin-land type of oil-control piston ring,” Journal of Mechanical Engineering Science, vol. 23, no. 2, pp. 51–62, 1981. View at Publisher · View at Google Scholar · View at Scopus
  6. S. M. Rhode, “A mixed friction model for dynamically loaded contacts with application to piston ring lubrication,” in Proceedings of the 7th Leeds-Lyon Symposium on Tribology, p. 262, Westbury House, September 1980.
  7. R. Truscott, T. J. Reid, and B. L. Ruddy, “Ring dynamics in a diesel engine and its effects on oil consumption and blowby,” SAE Paper 831282, SAE, 1983. View at Google Scholar
  8. B. L. Ruddy, T. J. Reid, and A. Veshagh, “Ring pack performance predictions,” in Proceedings of the AE Symposium, Paper No. 30, 1986.
  9. T. J. Banks and D. J. Lacy, “The application of analysis to piston ring performance,” IMechE paper No. C375/003, 1989.
  10. K. Maekawa, S. Mitsutake, and S. Morohoshi, “A study of engine lubricating oil consumption by computer simulation,” SAE Paper 860546, 1986. View at Google Scholar
  11. R. Munro, “Emissions impossible-the piston and ring support system,” SAE Paper 900590, 1990. View at Google Scholar
  12. R. Keribar, Z. Dursunkaya, and M. F. Flemming, “Integrated model of ring pack performance,” Journal of Engineering for Gas Turbines and Power, vol. 113, no. 3, pp. 382–389, 1991. View at Publisher · View at Google Scholar · View at Scopus
  13. R. Rabuté and T. Tian, “Challenges involved in piston top ring designs for modern SI engines,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 2, pp. 448–459, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Tian, L. B. Noordzij, V. W. Wong, and J. B. Heywood, “Modeling piston-ring dynamics, blowby, and ring-twist effects,” Journal of Engineering for Gas Turbines and Power, vol. 120, no. 4, pp. 843–854, 1998. View at Publisher · View at Google Scholar · View at Scopus
  15. M. A. Ejakov, H. J. Shock, and L. J. Brombolich, “Modeling of ring twist for an IC engine,” SAE Paper 982693, SAE, 1998. View at Google Scholar
  16. Y. Hu, H. S. Cheng, T. Arai, Y. Kobayashi, and S. Aoyama, “Numeric simulation of piston ring in mixed lubrication—a nonaxisymmetrical analysis,” Journal of Tribology, vol. 116, no. 3, pp. 470–478, 1994. View at Publisher · View at Google Scholar · View at Scopus
  17. M.-T. Ma, I. Sherrington, and E. H. Smith, “Analysis of lubrication and friction for a complete piston-ring pack with an improved oil availability model part 1: circumferentially uniform film,” Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, vol. 211, no. 1, pp. 1–15, 1997. View at Google Scholar · View at Scopus
  18. M.-T. Ma, I. Shcrrington, and E. H. Smith, “Analysis of lubrication and friction for a complete piston-ring pack with an improved oil availability model. Part II: circumferentially variable film,” Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, vol. 211, no. 1, pp. 17–27, 1997. View at Google Scholar · View at Scopus
  19. L. Liu, Modeling the performance of the piston ring-pack with consideration of non-axisymmetric characteristics of the power cylinder system in internal combustion engines [Ph.D. thesis], Massachusetts Institute of Technology, 2005.
  20. B. Thirouard, Characterization and modeling of the fundamental aspects of oil transport in the piston ring pack of internal combustion engines [Ph.D. thesis], MIT, 2001.
  21. C. H. Li, “Piston thermal deformation and friction considerations,” SAE paper 820086, 1982.
  22. M. T. Abbes, P. Maspeyrot, A. Bounif, and J. Frene, “A thermomechanical model of a direct injection diesel engine piston,” Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, vol. 218, no. 4, pp. 395–409, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. Liu and R. D. Reitz, “Multidimensional modeling of combustion chamber surface temperatures,” SAE Paper 971539, 1997. View at Google Scholar
  24. R. J. Jcnkin, E. H. James, and W. Malalasckcra, “Modelling the effects of combustion and turbulence on near-wall temperature gradients in the cylinders of spark ignition engines,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 212, no. 6, pp. 533–546, 1998. View at Publisher · View at Google Scholar · View at Scopus
  25. S. V. Bohac, D. M. Baker, and D. N. Assanis, “A global model for steady state and transient SI engine heat transfer studies,” SAE Paper 960073, SAE, 1996. View at Google Scholar
  26. V. Esfahanian, A. Javaheri, and M. Ghaffarpour, “Thermal analysis of an SI engine piston using different combustion boundary condition treatments,” Applied Thermal Engineering, vol. 26, no. 2-3, pp. 277–287, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. B. Y. Lee and W. J. Kim, “Thermal analysis of a liquid-petroleum-liquid injection engine piston using the inverse heat conduction method,” Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, vol. 222, no. 6, pp. 1033–1045, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. G. Li, 3D steady thermal analysis and intensity calculation for piston [M.S. thesis], Harbin Engineering University, Harbin, China, 2006.
  29. D.-M. Lou, Z.-Y. Zhang, and L.-L. Wang, “Heat transfer boundary condition and thermal load of combined-piston for locomotive diesel engines,” Journal of Tongji University, vol. 33, no. 5, pp. 664–667, 2005 (Chinese). View at Google Scholar · View at Scopus
  30. X.-Q. Lu, T. He, D.-Q. Zou, Y.-B. Guo, and W.-Y. Li, “Thermal analysis of composite piston in marine diesel engine based on inverse evaluation method of heat transfer coefficient,” Chinese Internal Combustion Engine Engineering, vol. 33, no. 4, pp. 71–76, 2012. View at Google Scholar · View at Scopus
  31. X. Lu, Q. Li, W. Zhang, Y. Guo, T. He, and D. Zou, “Thermal analysis on piston of marine diesel engine,” Applied Thermal Engineering, vol. 50, no. 1, pp. 168–176, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. T. He, X. Q. Lu, and Y. B. Guo, “Analysis of the heat transfer coefficients on the top of a marine diesel piston using the inverse heat conduction method,” Advanced Materials Research, vol. 291–294, pp. 1657–1661, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. R. J. Gamble, M. Priest, R. J. Chittenden, and C. M. Taylor, “Preliminary study of the influence of piston secondary motion on piston ring tribology,” Tribology Series, vol. 38, pp. 679–691, 2000. View at Publisher · View at Google Scholar · View at Scopus
  34. S. M. Chun, “Simulation of engine life time related with abnormal oil consumption,” Tribology International, vol. 44, no. 4, pp. 426–436, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. S.-W. Cho, S.-M. Choi, and C.-S. Bae, “Frictional modes of barrel shaped piston rings under flooded lubrication,” Tribology International, vol. 33, no. 8, pp. 545–551, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. G. A. Livanos and N. P. Kyrtatos, “Friction model of a marine diesel engine piston assembly,” Tribology International, vol. 40, no. 10–12, pp. 1441–1453, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. K. Mollenhauer, Diesel Engine, Springer, Berlin, Germany, 1997, (German).
  38. http://wenku.baidu.com/view/857487d5360cba1aa811da03.html.