Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 195410, 8 pages
http://dx.doi.org/10.1155/2015/195410
Research Article

Voltage Sources in 2D Fourier-Based Analytical Models of Electric Machines

1Department of IT&C, Electrical Energy Research Group, Ghent University, V. Vaerwyckweg 1, 9000 Gent, Belgium
2Department of EESA, Electrical Energy Laboratory, Ghent University, Technologiepark-Zwijnaarde 913, 9052 Gent, Belgium

Received 29 June 2015; Accepted 19 September 2015

Academic Editor: Jamal Berakdar

Copyright © 2015 Bert Hannon et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Zou, D.-G. Li, and X.-S. Hu, “Optimal sizing and control strategy design for heavy hybrid electric truck,” Mathematical Problems in Engineering, vol. 2012, Article ID 404073, 15 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. Wang and D. Sun, “Powertrain matching and optimization of dual-motor hybrid driving system for electric vehicle based on quantum genetic intelligent algorithm,” Discrete Dynamics in Nature and Society, vol. 2014, Article ID 956521, 11 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. B. Hannon, P. Sergeant, and L. Dupré, “2-D analytical subdomain model of a slotted PMSM with shielding cylinder,” IEEE Transactions on Magnetics, vol. 50, no. 7, 2014. View at Publisher · View at Google Scholar
  4. S. R. Holm, H. Polinder, and J. A. Ferreira, “Analytical modeling of a permanent-magnet synchronous machine in a flywheel,” IEEE Transactions on Magnetics, vol. 43, no. 5, pp. 1955–1967, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Dubas and C. Espanet, “Analytical solution of the magnetic field in permanent-magnet motors taking into account slotting effect: no-load vector potential and flux density calculation,” IEEE Transactions on Magnetics, vol. 45, no. 5, pp. 2097–2109, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. B. L. J. Gysen, K. J. Meessen, J. J. H. Paulides, and E. A. Lomonova, “General formulation of the electromagnetic field distribution in machines and devices using fourier analysis,” IEEE Transactions on Magnetics, vol. 46, no. 1, pp. 39–52, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Q. Zhu, L. J. Wu, and Z. P. Xia, “An accurate subdomain model for magnetic field computation in slotted surface-mounted permanent-magnet machines,” IEEE Transactions on Magnetics, vol. 46, no. 4, pp. 1100–1115, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Lubin, S. Mezani, and A. Rezzoug, “2-D exact analytical model for surface-mounted permanent-magnet motors with semi-closed slots,” IEEE Transactions on Magnetics, vol. 47, no. 2, pp. 479–492, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Boughrara, T. Lubin, and R. Ibtiouen, “General subdomain model for predicting magnetic field in internal and external rotor multiphase flux-switching machines topologies,” IEEE Transactions on Magnetics, vol. 49, no. 10, pp. 5310–5325, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Soulard and F. Meier, “Design guidelines and models for PMSMs with non-overlapping concentrated windings,” COMPEL, vol. 30, no. 1, pp. 72–83, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Chikouche, K. Boughrara, and R. Ibtiouen, “Cogging torque minimization of surface-mounted permanent magnet synchronous machines using hybrid magnet shapes,” Progress in Electromagnetics Research B, vol. 62, pp. 49–61, 2015. View at Publisher · View at Google Scholar
  12. S. Eriksson, H. Bernhoff, and M. Leijon, “A 225 kW direct driven PM generator adapted to a vertical axis wind turbine,” Advances in Power Electronics, vol. 2011, Article ID 239061, 7 pages, 2011. View at Publisher · View at Google Scholar
  13. L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Analytical modeling and analysis of open-circuit magnet loss in surface-mounted permanent-magnet machines,” IEEE Transactions on Magnetics, vol. 48, no. 3, pp. 1234–1247, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Pyrhönen, T. Jokinen, and V. Hrabovcová, Design of Rotating Electrical Machines, John Wiley & Sons, Chichester, UK, 2008. View at Publisher · View at Google Scholar