Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 240267, 11 pages
http://dx.doi.org/10.1155/2015/240267
Research Article

A Fault Diagnosis Approach for Gas Turbine Exhaust Gas Temperature Based on Fuzzy C-Means Clustering and Support Vector Machine

1College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China
2Harbin Marine Boiler & Turbine Research Institute, Harbin 150078, China

Received 16 October 2014; Revised 26 November 2014; Accepted 27 November 2014

Academic Editor: Enrico Zio

Copyright © 2015 Zhi-tao Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Y. Wang, Z. Q. Xu, R. Tang, S. Y. Li, and W. Wu, “Fault detection and diagnosis for gas turbines based on a kernelized information entropy model,” The Scientific World Journal, vol. 2014, Article ID 617162, 13 pages, 2014. View at Publisher · View at Google Scholar
  2. A. J. Volponi, “Gas turbine engine health management: past, present, and future trends,” Journal of Engineering for Gas Turbines and Power, vol. 136, no. 5, Article ID 051201, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Palmé, F. Liard, and D. Therkorn, “Similarity based modeling for turbine exit temperature spread monitoring on gas turbines,” in Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition (GT '13), American Society of Mechanical Engineers, San Antonio, Tex, USA, June 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. P. E. Patrick Hamilton and D. Ha, “Exhaust gas temperature capabilities now in system 1 software,” Product Update, vol. 25, no. 1, pp. 88–89, 2005. View at Google Scholar
  5. Y. X. Song, K. X. Zhang, and Y. S. Shi, “Research on aeroengine performance parameters forecast based on multiple linear regression forecasting method,” Journal of Aerospace Power, vol. 24, no. 2, pp. 427–431, 2009. View at Google Scholar · View at Scopus
  6. I. Yilmaz, “Evaluation of the relationship between exhaust gas temperature and operational parameters in CFM56-7B engines,” Proceedings of the Institution of Mechanical Engineers—Part G: Journal of Aerospace Engineering, vol. 223, no. 4, pp. 433–440, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. E. M. He and L. T. Song, “Analysis of EGT and measures to increase the EGT margin,” Aviation Engineering & Maintenance, vol. 6, pp. 20–21, 1999. View at Google Scholar
  8. X. F. Wang and J. M. Yang, “Analysis and treatment of larger exhaust dispersity fault for PG6551B gas turbine,” Gas Turbine Technology, vol. 17, no. 2, pp. 58–61, 2004. View at Google Scholar
  9. J. Chen, Y. H. Wang, and S. L. Weng, “Application of general regression neural network in fault detection of exhaust temperature sensors on gas turbines,” Proceedings of the Chinese Society of Electrical Engineering, vol. 29, no. 32, pp. 92–97, 2009. View at Google Scholar · View at Scopus
  10. S. Muthuraman, J. Twiddle, M. Singh, and N. Connolly, “Condition monitoring of SSE gas turbines using artificial neural networks,” Insight: Non-Destructive Testing and Condition Monitoring, vol. 54, no. 8, pp. 436–439, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Błachnio and W. I. Pawlak, “Damageability of gas turbine blades-evaluation of exhaust gas temperature in front of the turbine using a non-linear observer,” in Advances in Gas Turbine Technology, chapter 19, pp. 435–464, 2011. View at Publisher · View at Google Scholar
  12. Z. Korczewski, “Exhaust gas temperature measurements in diagnostic examination of naval gas turbine engines,” Polish Maritime Research, vol. 18, no. 2, pp. 37–43, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Korczewski, “Exhaust gas temperature measurements in diagnostic examination of naval gas turbine engines—part II: unsteady processes,” Polish Maritime Research, vol. 18, no. 3, pp. 37–42, 2011. View at Google Scholar
  14. Z. Korczewski, “Exhaust gas temperature measurements in diagnostic examination of naval gas turbine engines,” Polish Maritime Research, vol. 18, no. 4, pp. 49–53, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. A. D. Kenyon, V. M. Catterson, and S. D. J. McArthur, “Development of an intelligent system for detection of exhaust gas temperature anomalies in gas turbines,” Insight: Non-Destructive Testing and Condition Monitoring, vol. 52, no. 8, pp. 419–423, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Xia, D. Byrd, S. Dekate, and B. Lee, “High-density fiber optical sensor and instrumentation for gas turbine operation condition monitoring,” Journal of Sensors, vol. 2013, Article ID 206738, 10 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Yang, B. W. K. Ling, and C. Bingham, “Fault detection and signal reconstruction for increasing operational availability of industrial gas turbines,” Measurement, vol. 46, no. 6, pp. 1938–1946, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. S. C. Gülen, P. R. Griffin, and S. Paolucci, “Real-time on-line performance diagnostics of heavy-duty industrial gas turbines,” Journal of Engineering for Gas Turbines and Power, vol. 124, no. 4, pp. 910–921, 2002. View at Publisher · View at Google Scholar · View at Scopus
  19. D. H. Seo, T. S. Roh, and D. W. Choi, “Defect diagnostics of gas turbine engine using hybrid SVM-ANN with module system in off-design condition,” Journal of Mechanical Science and Technology, vol. 23, no. 3, pp. 677–685, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Hao, J. G. Sun, G. Q. Yang, and J. Bai, “The application of support vector machines to gas turbine performance diagnosis,” Chinese Journal of Aeronautics, vol. 18, no. 1, pp. 15–19, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. W. X. Wang and W. Z. An, “Engine vibration fault diagnosis research based on fuzzy clustering method of gas turbine,” Gas Turbine Technology, vol. 26, no. 3, pp. 44–47, 2013. View at Google Scholar
  22. H. J. Mao, “Analysis of exhaust temperature monitor and protection function for gas turbine,” Huadian Technology, vol. 31, no. 8, pp. 11–15, 2009. View at Google Scholar
  23. J. C. Bezdek, Pattern Recognition with Fuzzy Objective Function Algorithms, Kluwer Academic, New York, NY, USA, 1981. View at MathSciNet
  24. S. Wikaisuksakul, “A multi-objective genetic algorithm with fuzzy c-means for automatic data clustering,” Applied Soft Computing, vol. 24, pp. 679–691, 2014. View at Publisher · View at Google Scholar
  25. W. Cai, S. Chen, and D. Zhang, “Fast and robust fuzzy c-means clustering algorithms incorporating local information for image segmentation,” Pattern Recognition, vol. 40, no. 3, pp. 825–838, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. S. N. Omkar, S. Suresh, T. R. Raghavendra, and V. Mani, “Acoustic emission signal classification using fuzzy C-means clustering,” in Proceedings of the 9th International Conference on Neural Information Processing, vol. 4, pp. 1827–1831, 2002.
  27. H. Zhao, P. H. Wang, J. Qian, Z. Su, and X. Peng, “Modeling for target-value of boiler monitoring parameters based on fuzzy C-means clustering algorithm,” Proceedings of the Chinese Society of Electrical Engineering, vol. 31, no. 32, pp. 16–22, 2011. View at Google Scholar · View at Scopus
  28. C. Xu, P. Zhang, G. Ren, and J. Fu, “Engine wear fault diagnosis based on improved semi-supervised fuzzy c-means clustering,” Journal of Mechanical Engineering, vol. 47, no. 17, pp. 55–60, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. H. B. Sahu, S. S. Mahapatra, and D. C. Panigrahi, “Fuzzy c-means clustering approach for classification of Indian coal seams with respect to their spontaneous combustion susceptibility,” Fuel Processing Technology, vol. 104, pp. 115–120, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. N. R. Pal and J. C. Bezdek, “On cluster validity for the fuzzy c-means model,” IEEE Transactions on Fuzzy Systems, vol. 3, no. 3, pp. 370–379, 1995. View at Publisher · View at Google Scholar · View at Scopus
  31. V. N. Vapnik, The Nature of Statistical Learning Theory, Springer, 1995. View at Publisher · View at Google Scholar · View at MathSciNet
  32. Q. Hu, Z. He, Z. Zhang, and Y. Zi, “Fault diagnosis of rotating machinery based on improved wavelet package transform and SVMs ensemble,” Mechanical Systems and Signal Processing, vol. 21, no. 2, pp. 688–705, 2007. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Widodo and B. S. Yang, “Support vector machine in machine condition monitoring and fault diagnosis,” Mechanical Systems and Signal Processing, vol. 21, no. 6, pp. 2560–2574, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Yang, Y. Zhang, and Y. Zhu, “Intelligent fault diagnosis of rolling element bearing based on SVMs and fractal dimension,” Mechanical Systems and Signal Processing, vol. 21, no. 5, pp. 2012–2024, 2007. View at Publisher · View at Google Scholar · View at Scopus
  35. C. W. Hsu and C. J. Lin, “A comparison of methods for multiclass support vector machines,” IEEE Transactions on Neural Networks, vol. 13, no. 2, pp. 415–425, 2002. View at Publisher · View at Google Scholar · View at Scopus