Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 303972, 10 pages
http://dx.doi.org/10.1155/2015/303972
Research Article

Kinematics Analysis of the Roller Screw Based on the Accuracy of Meshing Point Calculation

School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China

Received 31 October 2014; Revised 20 March 2015; Accepted 25 March 2015

Academic Editor: Francesco Pellicano

Copyright © 2015 Yanqiang Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. M. Waide, “Aircraft landing gear with integrated extension, retraction, and leveling feature,” U.S. Patent 7,942,366, 2011.
  2. M. S. Worthington, T. A. Beets, J. H. Beno et al., “Design and development of a high-precision, high-payload telescope dual-drive system,” in Ground-Based and Airborne Telescopes III, vol. 7733 of Proceedings of SPIE, July 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Buschmann, S. Lohmeier, and H. Ulbrich, “Humanoid robot Lola: design and walking control,” Journal of Physiology Paris, vol. 103, no. 3-5, pp. 141–148, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. P. C. Lemor, “The roller screw, an efficient and reliable mechanical component of electro-mechanical actuators,” in Proceedings of the 31st Intersociety Energy Conversion Engineering Conference (IECEC '96), pp. 215–220, August 1996. View at Scopus
  5. M. H. Jones and S. A. Velinsky, “Kinematics of roller migration in the planetary roller screw mechanism,” Journal of Mechanical Design, Transactions of the ASME, vol. 134, no. 6, Article ID 061006, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. M. H. Jones and S. A. Velinsky, “Contact kinematics in the roller screw mechanism,” Transactions of the ASME, Journal of Mechanical Design, vol. 135, no. 5, Article ID 51003, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. M. H. Jones and S. A. Velinsky, “Stiffness of the roller screw mechanism by the direct method,” Mechanics Based Design of Structures and Machines, vol. 42, no. 1, pp. 17–34, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Hojjat and M. M. Agheli, “A comprehensive study on capabilities and limitations of roller-screw with emphasis on slip tendency,” Mechanism and Machine Theory, vol. 44, no. 10, pp. 1887–1899, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Liu and S. Ma, “New development and key technology of planetary roller screw,” Journal of Mechanical Transmission, vol. 36, no. 5, pp. 103–108, 2012 (Chinese). View at Google Scholar
  10. Y. Zhao, J. Ni, and L. Lv, “Meshing calculation of roller screw,” Journal of Machine Design, vol. 3, no. 20, pp. 34–36, 2003 (Chinese). View at Google Scholar
  11. R. Su, “Principle analysis of roller screw,” Journal of Sichuan Institute of Technology, vol. 17, no. 3, pp. 33–36, 1998 (Chinese). View at Google Scholar
  12. Y. Q. Liu and J. S. Wang, “Simulation of crossing threaded planetary roller screw engagement,” Advanced Materials Research, vol. 889, pp. 518–526, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Wei and J. Yang, “Optimized analysis on structural parameter for planetary roller screw,” Journal of Mechanical Transmission, vol. 35, no. 6, pp. 44–47, 2011 (Chinese). View at Google Scholar
  14. F. L. Litvin and A. Fuentes, Gear Geometry and Applied Theory, Cambridge University Press, Cambridge, UK, 2004.