Table of Contents Author Guidelines Submit a Manuscript
Corrigendum

A corrigendum for this article has been published. To view the corrigendum, please click here.

Corrigendum
Mathematical Problems in Engineering
Volume 2015, Article ID 365141, 19 pages
http://dx.doi.org/10.1155/2015/365141
Research Article

On Synergistic Integration of Adaptive Dithering Based Internal Model Control for Hysteresis Compensation in Piezoactuated Nanopositioner

1Electronics & Instrumentation Group, CSIR-CMERI, Durgapur 713209, India
2Department of Electrical Engineering, University of Minnesota, Minneapolis, MN 55455, USA

Received 17 September 2014; Accepted 1 December 2014

Academic Editor: Xinggang Yan

Copyright © 2015 Saikat Kumar Shome et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. K. Leang, Q. Zou, and S. Devasia, “Feedforward control of piezoactuators in atomic force microscope systems,” IEEE Control Systems Magazine, vol. 29, no. 1, pp. 70–82, 2009. View at Publisher · View at Google Scholar · View at MathSciNet
  2. S. Bashash and N. Jalili, “Robust adaptive control of coupled parallel piezo-flexural nanopositioning stages,” IEEE/ASME Transactions on Mechatronics, vol. 14, no. 1, pp. 11–20, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. J. E. Colgate and N. Hogan, “Robust control of dynamically interacting systems,” International Journal of Control, vol. 48, no. 1, pp. 65–88, 1988. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  4. N. Hogan, “Impedance control: an approach to manipulation: part III—applications,” ASME Journal of Dynamic Systems, Measurement, and Control, vol. 107, no. 1, pp. 17–24, 1985. View at Publisher · View at Google Scholar · View at Scopus
  5. M. H. Raibert and J. J. Craig, “Hybrid posiition/force control of manipulators,” ASME Journal of Dynamic Systems, Measurement and Control, vol. 103, no. 2, pp. 126–133, 1981. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Chaoui, P. Sicard, and M. Sawan, “High precision ANN-based adaptive displacement tracking of piezoelectric actuators for MEMS,” in Proceedings of the 8th IEEE International NEWCAS Conference (NEWCAS '10), pp. 85–88, Montreal, Canada, June 2010. View at Publisher · View at Google Scholar
  7. J. Yi, S. Chang, and Y. Shen, “Disturbance-observer-based hysteresis compensation for piezoelectric actuators,” IEEE/ASME Transactions on Mechatronics, vol. 14, no. 4, pp. 456–464, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Schitter, P. Menold, H. F. Knapp, F. Allgöwer, and A. Stemmer, “High performance feedback for fast scanning atomic force microscopes,” Review of Scientific Instruments, vol. 72, no. 8, pp. 3320–3327, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Salapaka, A. Sebastian, J. P. Cleveland, and M. V. Salapaka, “High bandwidth nano-positioner: a robust control approach,” Review of Scientific Instruments, vol. 73, no. 9, pp. 3232–3241, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Croft and S. Devasia, “Vibration compensation for high speed scanning tunneling microscopy,” Review of Scientific Instruments, vol. 70, no. 12, pp. 4600–4605, 1999. View at Publisher · View at Google Scholar · View at Scopus
  11. R. C. Smith, M. V. Salapaka, A. Hatch, J. Smith, and T. De, “Model development and inverse compensator design for high speed nanopositioning,” in Proceedings of the 41st IEEE Conference on Decision and Control, pp. 3652–3657, December 2002. View at Scopus
  12. T. Orlowska-Kowalska, M. Kamiński, and K. Szabat, “Implementation of a sliding-mode controller with an integral function and fuzzy gain value for the electrical drive with an elastic joint,” IEEE Transactions on Industrial Electronics, vol. 57, no. 4, pp. 1309–1317, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Li and Q. Xu, “Adaptive sliding mode control with perturbation estimation and PID sliding surface for motion tracking of a piezo-driven micromanipulator,” IEEE Transactions on Control Systems Technology, vol. 18, no. 4, pp. 798–810, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. H. C. Liaw, B. Shirinzadeh, and J. Smith, “Sliding-mode enhanced adaptive motion tracking control of piezoelectric actuation systems for micro/nano manipulation,” IEEE Transactions on Control Systems Technology, vol. 16, no. 4, pp. 826–833, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. X.-G. Yan, S. K. Spurgeon, and C. Edwards, “Memoryless static output feedback sliding mode control for nonlinear systems with delayed disturbances,” IEEE Transactions on Automatic Control, vol. 59, no. 7, pp. 1906–1912, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  16. X.-G. Yan, S. K. Spurgeon, and C. Edwards, “State and parameter estimation for nonlinear delay systems using sliding mode techniques,” IEEE Transactions on Automatic Control, vol. 58, no. 4, pp. 1023–1029, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  17. J. J. Slotine and S. S. Sastry, “Tracking control of nonlinear systems using sliding surfaces, with application to robot manipulators,” International Journal of Control, vol. 38, no. 2, pp. 465–492, 1983. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  18. H. Elmali and N. Olgac, “Sliding mode control with perturbation estimation (SMCPE): a new approach,” International Journal of Control, vol. 56, no. 4, pp. 923–941, 1992. View at Publisher · View at Google Scholar · View at MathSciNet
  19. A. J. Mehta, B. Bandyopadhyay, and A. Inoue, “Reduced-order observer design for servo system using duality to discrete-time sliding-surface design,” IEEE Transactions on Industrial Electronics, vol. 57, no. 11, pp. 3793–3800, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. B. Veselic, B. Perunicic-Drazenovic, and Č. Milosavljevic, “Improved discrete-time sliding-mode position control using Euler velocity estimation,” IEEE Transactions on Industrial Electronics, vol. 57, no. 11, pp. 3840–3847, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. C.-L. Hwang and Y.-M. Chen, “Discrete sliding-mode tracking control of high-displacement piezoelectric actuator systems,” Journal of Dynamic Systems, Measurement and Control, vol. 126, no. 4, pp. 721–731, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Tao and P. V. Kokotovic, “Adaptive control of plants with unknown hystereses,” IEEE Transactions on Automatic Control, vol. 40, no. 2, pp. 200–212, 1995. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  23. X. Tan and H. K. Khalil, “Two-time-scale averaging of systems involving operators and its application to adaptive control of hysteretic systems,” in Proceedings of the American Control Conference (ACC '09), pp. 4476–4481, June 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. D. Croft, G. Shed, and S. Devasia, “Creep, hysteresis, and vibration compensation for piezoactuators: atomic force microscopy application,” Journal of Dynamic Systems, Measurement and Control, vol. 123, no. 1, pp. 35–43, 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. D. Croft and S. Devasia, “Hysteresis and vibration compensation for piezoactuators,” Journal of Guidance, Control, and Dynamics, vol. 21, no. 5, pp. 710–717, 1998. View at Publisher · View at Google Scholar · View at Scopus
  26. G. Schitter and A. Stemmer, “Model-based signal conditioning for high-speed atomic force and friction force microscopy,” Microelectronic Engineering, vol. 67-68, pp. 938–944, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Zhao and S. Jayasuriya, “Feedforward controllers and tracking accuracy in the presence of plant uncertainties,” Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol. 117, no. 4, pp. 490–495, 1995. View at Publisher · View at Google Scholar
  28. D. E. Rivera, M. Morari, and S. Skogestad, “Internal model control: PID controller design,” Industrial & Engineering Chemistry Process Design and Development, vol. 25, no. 1, pp. 252–265, 1986. View at Publisher · View at Google Scholar · View at Scopus
  29. C. E. Garcia and M. Morari, “Internal model control. A unifying review and some new results,” Industrial & Engineering Chemistry, Process Design and Development, vol. 21, no. 2, pp. 308–323, 1982. View at Publisher · View at Google Scholar · View at Scopus
  30. D. Ha, R.-Y. Kim, and D. Hyun, “Internal-model-principle-based robust optimal nonlinear control for position tracking of permanent-magnet synchronous motor servo system,” Transactions of the Institute of Measurement and Control, 2014. View at Publisher · View at Google Scholar
  31. G. Song, J. Zhao, X. Zhou, and J. A. de Abreu-García, “Tracking control of a piezoceramic actuator with hysteresis compensation using inverse Preisach model,” IEEE/ASME Transactions on Mechatronics, vol. 10, no. 2, pp. 198–209, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. J.-C. Shen, W.-Y. Jywe, H.-K. Chiang, and Y.-L. Shu, “Precision tracking control of a piezoelectric-actuated system,” Precision Engineering, vol. 32, no. 2, pp. 71–78, 2008. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Bashash and N. Jalili, “Robust multiple frequency trajectory tracking control of piezoelectrically driven micro/nanopositioning systems,” IEEE Transactions on Control Systems Technology, vol. 15, no. 5, pp. 867–878, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. C.-J. Lin and S.-R. Yang, “Precise positioning of piezo-actuated stages using hysteresis-observer based control,” Mechatronics, vol. 16, no. 7, pp. 417–426, 2006. View at Publisher · View at Google Scholar · View at Scopus
  35. S. K. Shome, M. Prakash, A. Mukherjee, and U. Datta, “Dither control for Dahl model based hysteresis compensation,” in Proceedings of the IEEE International Conference on Signal Processing, Computing and Control (ISPCC '13), pp. 1–6, September 2013. View at Publisher · View at Google Scholar · View at Scopus
  36. S. K. Shome, S. Pradhan, A. Mukherjee, and U. Datta, “Dither based precise position control of piezo actuated micro-nano manipulator,” in Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON '13), pp. 3486–3491, November 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. Q. Xu and Y. Li, “Dahl model-based hysteresis compensation and precise positioning control of an XY parallel micromanipulator with piezoelectric actuation,” Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol. 132, no. 4, pp. 1–12, 2010. View at Publisher · View at Google Scholar · View at Scopus
  38. D. Helmick and W. Messner, “Higher order modeling of hysteresis in disk drive actuators,” in Proceedings of the 42nd IEEE Conference on Decision and Control, pp. 3712–3716, December 2003. View at Scopus
  39. M. Clerc and J. Kennedy, “The particle swarm-explosion, stability, and convergence in a multidimensional complex space,” IEEE Transactions on Evolutionary Computation, vol. 6, no. 1, pp. 58–73, 2002. View at Publisher · View at Google Scholar · View at Scopus
  40. Q. Xu and Y. Li, “Error analysis and optimal design of a class of translational parallel kinematic machine using particle swarm optimization,” Robotica, vol. 27, no. 1, pp. 67–78, 2009. View at Publisher · View at Google Scholar · View at Scopus
  41. M. Prakash, S. K. Shome, S. Pradhan, and M. K. Patel, “A comparison of dithers for hysteresis alleviation in second order dahl model based piezoelectric actuator,” in Proceedings of the IEEE International Conference on Control, Automation, Robotics and Embedded System, pp. 1–6, 2013.
  42. S. Pradhan, S. K. Shome, M. Prakash, and M. K. Patel, “Performance evaluation of dither distributions of piezo electric actuators for nano-positioning,” in Proceedings of the IEEE International Conference on Control, Automation, Robotics and Embedded Systems (CARE '13), pp. 1–6, December 2013. View at Publisher · View at Google Scholar · View at Scopus
  43. L. Gammaitoni, “Stochastic resonance in multi-threshold systems,” Physics Letters A, vol. 208, no. 4–6, pp. 315–322, 1995. View at Publisher · View at Google Scholar · View at Scopus
  44. L. Gammaitoni, P. Hänggi, P. Jung, and F. Marchesoni, “Stochastic resonance,” Reviews of Modern Physics, vol. 70, no. 1, pp. 223–287, 1998. View at Publisher · View at Google Scholar · View at Scopus
  45. M. Basso, M. Dahleh, I. Mezic, and M. V. Salapaka, “Stochastic resonance in AFM's,” in Proceedings of the American Control Conference (ACC '99), vol. 6, pp. 3774–3778, June 1999. View at Scopus
  46. T. Hong and T. N. Chang, “Control of nonlinear piezoelectric stack using adaptive dither,” in Proceedings of the American Control Conference, pp. 76–80, June 1995. View at Scopus
  47. M. Rakotondrabe, A. G. Fowler, and S. O. Reza Moheimani, “Control of a novel 2-DoF MEMS nanopositioner with electrothermal actuation and sensing,” IEEE Transactions on Control Systems Technology, vol. 22, no. 4, pp. 1486–1497, 2013. View at Publisher · View at Google Scholar · View at Scopus
  48. A. Isidori, L. Marconi, and A. Serrani, Robust Autonomous Guidance: An Internal Model Approach, vol. 16, Springer, 2003.
  49. Y. Zhu, Multivariable System Identification for Process Control, Elsevier, New York, NY, USA, 2001.