Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 436717, 6 pages
http://dx.doi.org/10.1155/2015/436717
Research Article

Thermal Error Modeling Method for a CNC Machine Tool Feed Drive System

1College of Mechanical Engineering, Jilin University, Changchun 130025, China
2State Key Laboratory, Shenyang Machine Tool (Group) Co., Ltd., Shenyang 110142, China

Received 17 July 2015; Revised 18 September 2015; Accepted 20 September 2015

Academic Editor: Ricardo Aguilar-López

Copyright © 2015 Kuo Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Kuo Liu, Mingjia Sun, Yuliang Wu, and Tiejun Zhu, “Thermal Error Modeling Method for a CNC Machine Tool Feed Drive System,” Mathematical Problems in Engineering, vol. 2015, Article ID 436717, 6 pages, 2015. https://doi.org/10.1155/2015/436717.