Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 452740, 14 pages
http://dx.doi.org/10.1155/2015/452740
Research Article

The Study of Operation Modes and Control Strategies of a Multidirectional MC for Battery Based System

1Department of Electrical & Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia
2Institute of Advanced Technology (ITMA), Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia
3Department of Biological Functions Engineering, Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu 808-0916, Japan
4Graduate School of Science and Engineering, Yamaguchi University, 2-16-1 Tokiwadai, Ube-shi, Yamaguchi 755-8611, Japan

Received 8 April 2015; Revised 13 June 2015; Accepted 23 June 2015

Academic Editor: Xiaosong Hu

Copyright © 2015 Saman Toosi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Malo and R. Griñó, “Design, construction, and control of a stand-alone energy-conditioning system for PEM-type fuel cells,” IEEE Transactions on Power Electronics, vol. 25, no. 10, pp. 2496–2506, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. Y.-M. Chen, Y.-C. Liu, and F.-Y. Wu, “Multi-input DC/DC converter based on the multiwinding transformer for renewable energy applications,” IEEE Transactions on Industry Applications, vol. 38, no. 4, pp. 1096–1104, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. L. Solero, A. Lidozzi, and J. A. Pomilio, “Design of multiple-input power converter for hybrid vehicles,” IEEE Transactions on Power Electronics, vol. 20, no. 5, pp. 1007–1016, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Iqbal, S. M. Ahmed, and H. Abu-Rub, “Space vector PWM technique for a three-to-five-phase matrix converter,” IEEE Transactions on Industry Applications, vol. 48, no. 2, pp. 697–707, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Solero, F. Caricchi, F. Crescimbini, O. Honorati, and F. Mezzetti, “Performance of A 10 kW power electronic interface for combined wind/PV isolated generating systems,” in Proceedings of the 1996 27th Annual IEEE Power Electronics Specialists Conference (PESC '96), pp. 1027–1032, January 1996. View at Scopus
  6. Y.-M. Chen, Y.-C. Liu, F.-Y. Wu, and T.-F. Wu, “Multi-input DC/DC converter based on the flux additivity,” in Proceedings of the 36th IAS Annual Meeting. Conference Record of the IEEE Industry Applications Conference, vol. 3, pp. 1866–1873, IEEE, Chicago, Ill, USA, September-October 2001. View at Publisher · View at Google Scholar
  7. Q. Mei, W.-Y. Wu, and Z.-L. Xu, “A multi-directional power converter for a hybrid renewable energy distributed generation system with battery storage,” in Proceedings of the 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC '06), pp. 1–5, IEEE, Shanghai, China, August 2006. View at Publisher · View at Google Scholar
  8. D. Liu and H. Li, “A ZVS Bi-directional DC-DC converter for multiple energy storage elements,” IEEE Transactions on Power Electronics, vol. 21, no. 5, pp. 1513–1517, 2006. View at Publisher · View at Google Scholar
  9. Z. Qian, O. Abdel-Rahman, and I. Batarseh, “An integrated four-port DC/DC converter for renewable energy applications,” IEEE Transactions on Power Electronics, vol. 25, no. 7, pp. 1877–1887, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. P. K. Goel, B. Singh, S. S. Murthy, and N. Kishore, “Isolated wind-hydro hybrid system using cage generators and battery storage,” IEEE Transactions on Industrial Electronics, vol. 58, no. 4, pp. 1141–1153, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Venturini and A. Alesina, “The generalised transformer—a new bidirectional sinusoidal waveform frequency converter with continuously adjustable input power factor,” in Proceedings of the Power Electronics Specialists Conference (PESC '80), pp. 242–252, 1980.
  12. A. Alesina and M. G. B. Venturini, “Analysis and design of optimum-amplitude nine-switch direct AC-AC converters,” IEEE Transactions on Power Electronics, vol. 4, no. 1, pp. 101–112, 1989. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Rodriguez, “A new control technique for AC-AC converters,” in Proceedings of the IFAC Control in Power Electronics and Electrical Drives Conference, pp. 203–208, 1983.
  14. P. Ziogas, S. I. Khan, and M. Rashid, “Analysis and design of forced commutated cycloconverter structures with improved transfer characteristics,” in Proceedings of the 16th Annual Power Electronics Specialists Conference (PESC '85), Record (A86-40426 19-33), pp. 610–622, Institute of Electrical and Electronics Engineers, Toulouse, France, June 1985.
  15. P. D. Ziogas, S. I. Khan, and M. H. Rashid, “Some improved forced commutated cycloconverter structures,” IEEE Transactions on Industry Applications, vol. 21, no. 5, pp. 1242–1253, 1985. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Kastner and J. Rodriguez, “A forced commutated cycloconverter with control of the source and load currents,” in Proceedings of the European Conference on Power Electronics and Applications (EPE '85), pp. 1141–1146, 1985.
  17. L. Huber and D. Borojevic, “Space vector modulator for forced commutated cycloconverters,” in Proceedings of the Conference Record of the IEEE Industry Applications Society Annual Meeting, vol. 1, pp. 871–876, San Diego, Calif, USA, October 1989.
  18. L. Huber and D. Borojevic, “Space vector modulated three-phase to three-phase matrix converter with input power factor correction,” IEEE Transactions on Industry Applications, vol. 31, no. 6, pp. 1234–1246, 1995. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Huber, D. Borojevic, and N. Burany, “Digital implementation of the space vector modulator for forced commutated cycloconverters,” in Proceedings of the 4th International Conference on Power Electronics and Variable-Speed Drives, pp. 63–68, July 1990. View at Scopus
  20. L. Huber, D. Borojevic, X. F. Zhuang, and F. C. Lee, “Design and implementation of a three-phase to three-phase matrix converter with input power factor correction,” in Proceedings of the 8th Annual Applied Power Electronics Conference and Exposition (APEC '93), pp. 860–865, IEEE, San Diego, Calif, USA, March 1993. View at Publisher · View at Google Scholar
  21. L. Huber, N. Burány, and D. Borojević, “Analysis, design and implementation of the space-vector modulator for forced-commutated cycloconvertors,” IEE Proceedings B: Electric Power Applications, vol. 139, no. 2, pp. 103–113, 1992. View at Publisher · View at Google Scholar · View at Scopus
  22. L. Wei and T. A. Lipo, “A novel matrix converter topology with simple commutation,” in Proceedings of the 36th IAS Annual Meeting—Conference Record of the Industry Applications, pp. 1749–1754, October 2001. View at Scopus
  23. L. Wei, T. A. Lipo, and H. Chan, “Matrix converter topologies with reduced number of switches,” in Proceedings of the IEEE 33rd Annual Power Electronics Specialists Conference (PESC '02), pp. 57–63, June 2002. View at Scopus
  24. Y.-D. Yoon and S.-K. Sul, “Carrier-based modulation technique for matrix converter,” IEEE Transactions on Power Electronics, vol. 21, no. 6, pp. 1691–1703, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. Li, N.-S. Choi, B.-M. Han, K. M. Kim, B. Lee, and J.-H. Park, “Direct duty ratio pulse width modulation method for matrix converters,” International Journal of Control, Automation and Systems, vol. 6, no. 5, pp. 660–669, 2008. View at Google Scholar · View at Scopus
  26. Y. Li and N.-S. Choi, “Carrier based pulse width modulation for matrix converters,” in Proceedings of the 24th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '09), pp. 1709–1715, 2009.
  27. S. Toosi, N. Misron, T. Hanamoto, I. B. Aris, M. A. Mohd Radzi, and H. Yamada, “Novel modulation method for multidirectional matrix converter,” The Scientific World Journal, vol. 2014, Article ID 645734, 12 pages, 2014. View at Publisher · View at Google Scholar
  28. N. Yamamura, M. Ishida, and T. Hori, “A simple wind power generating system with permanent magnet type synchronous generator,” in Proceedings of the 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS '99), pp. 849–854, July 1999. View at Scopus
  29. S. Sato and A. Kawamura, “A new estimation method of state of charge using terminal voltage and internal resistance for lead acid battery,” in Proceedings of the Power Conversion Conference (PCC-Osaka '02), vol. 2, pp. 565–570, IEEE, Osaka, Japan, 2002. View at Publisher · View at Google Scholar
  30. F. Huet, “A review of impedance measurements for determination of the state-of-charge or state-of-health of secondary batteries,” Journal of Power Sources, vol. 70, no. 1, pp. 59–69, 1998. View at Publisher · View at Google Scholar · View at Scopus
  31. S. Rodrigues, N. Munichandraiah, and A. K. Shukla, “Review of state-of-charge indication of batteries by means of a.c. impedance measurements,” Journal of Power Sources, vol. 87, no. 1, pp. 12–20, 2000. View at Publisher · View at Google Scholar · View at Scopus
  32. O. Barbarisi, F. Vasca, and L. Glielmo, “State of charge Kalman filter estimator for automotive batteries,” Control Engineering Practice, vol. 14, no. 3, pp. 267–275, 2006. View at Publisher · View at Google Scholar · View at Scopus
  33. R. E. Kalman, “A new approach to linear filtering and prediction problems,” Journal of Basic Engineering, vol. 82, no. 1, pp. 35–45, 1960. View at Publisher · View at Google Scholar
  34. C. C. Chan, E. W. C. Lo, and S. Weixiang, “The available capacity computation model based on artificial neural network for lead-acid batteries in electric vehicles,” Journal of Power Sources, vol. 87, no. 1, pp. 201–204, 2000. View at Publisher · View at Google Scholar · View at Scopus
  35. A. J. Salkind, C. Fennie, P. Singh, T. Atwater, and D. E. Reisner, “Determination of state-of-charge and state-of-health of batteries by fuzzy logic methodology,” Journal of Power Sources, vol. 80, no. 1, pp. 293–300, 1999. View at Publisher · View at Google Scholar · View at Scopus
  36. S. Piller, M. Perrin, and A. Jossen, “Methods for state-of-charge determination and their applications,” Journal of Power Sources, vol. 96, no. 1, pp. 113–120, 2001. View at Publisher · View at Google Scholar · View at Scopus
  37. L. C. Herrero, S. de Pablo, F. Martín, J. M. Ruiz, J. M. González, and A. B. Rey, “Comparative analysis of the techniques of current commutation in matrix converters,” in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE '07), pp. 521–526, June 2007. View at Publisher · View at Google Scholar · View at Scopus
  38. P. W. Wheeler, J. Rodríguez, J. C. Clare, L. Empringham, and A. Weinstein, “Matrix converters: a technology review,” IEEE Transactions on Industrial Electronics, vol. 49, no. 2, pp. 276–288, 2002. View at Publisher · View at Google Scholar · View at Scopus
  39. C. L. Neft, “AC power supplied static switching apparatus having energy recovery capability,” Google Patents, 1987.
  40. N. Nguyen-Quang, D. A. Stone, C. M. Bingham, and M. P. Foster, “A three-phase to single-phase matrix converter for high-frequency induction heating,” in Proceedings of the 13th European Conference on Power Electronics and Applications (EPE '09), pp. 1–10, September 2009. View at Scopus
  41. A. K. Sahoo, A. Shahani, K. Basu, and N. Mohan, “LCL filter design for grid-connected inverters by analytical estimation of PWM ripple voltage,” in Proceedings of the 29th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '14), pp. 1281–1286, March 2014. View at Publisher · View at Google Scholar · View at Scopus
  42. A. K. Sahoo, K. Basu, and N. Mohan, “Comparison of filter components of back-to-back and matrix converter by analytical estimation of ripple quantities,” in Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON '13), pp. 4831–4837, November 2013. View at Publisher · View at Google Scholar · View at Scopus