Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 485686, 11 pages
http://dx.doi.org/10.1155/2015/485686
Research Article

Semi-Analytical Finite Strip Transfer Matrix Method for Buckling Analysis of Rectangular Thin Plates

Mechanics Department, Nanjing Tech University, Nanjing, China

Received 16 June 2015; Revised 28 September 2015; Accepted 22 October 2015

Academic Editor: Alessandro Gasparetto

Copyright © 2015 Li-Ke Yao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. P. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill, New York, NY, USA, 1959.
  2. J. N. Reddy, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press, New York, NY, USA, 2004.
  3. J. Rhodes, “Buckling of thin plates and members—and early work on rectangular tubes,” Thin-Walled Structures, vol. 40, no. 2, pp. 87–108, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. R. E. Kielb and L. S. Han, “Vibration and buckling of rectangular plates under in-plane hydrostatic loading,” Journal of Sound and Vibration, vol. 70, no. 4, pp. 543–555, 1980. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Takeshi and M. Hiroshi, “Elastic buckling of rectangular mindlin plate with mixed boundary conditions,” Computers & Structures, vol. 25, no. 5, pp. 801–808, 1987. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Narita and A. W. Leissa, “Buckling studies for simply supported symmetrically laminated rectangular plates,” International Journal of Mechanical Sciences, vol. 32, no. 11, pp. 909–924, 1990. View at Publisher · View at Google Scholar · View at Scopus
  7. I. E. Harik and N. Balakrishnan, “Stability of orthotropic rectangular plates,” Applied Mathematical Modelling, vol. 18, no. 7, pp. 400–402, 1994. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  8. Y. Z. Chen, “Evaluation of buckling loading of rectangular bending plate by using an iterative approach,” Computer Methods in Applied Mechanics and Engineering, vol. 167, no. 1-2, pp. 91–99, 1998. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  9. S. Yuan and Y. Jin, “Computation of elastic buckling loads of rectangular thin plates using the extended Kantorovich method,” Computers & Structures, vol. 66, no. 6, pp. 861–867, 1998. View at Publisher · View at Google Scholar · View at Scopus
  10. T. M. Teo and K. M. Liew, “A differential quadrature procedure for three-dimensional buckling analysis of rectangular plates,” International Journal of Solids and Structures, vol. 36, no. 8, pp. 1149–1168, 1998. View at Google Scholar · View at Scopus
  11. C.-P. Wu, Y.-M. Wang, and Y.-C. Hung, “Asymptotic finite strip analysis of doubly curved laminated shells,” Computational Mechanics, vol. 27, no. 2, pp. 107–118, 2001. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  12. C.-S. Chien, S.-L. Chang, and Z. Mei, “Tracing the buckling of a rectangular plate with the Block GMRES method,” Journal of Computational and Applied Mathematics, vol. 136, no. 1-2, pp. 199–218, 2001. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  13. J. Wang, K. M. Liew, M. J. Tan, and S. Rajendran, “Analysis of rectangular laminated composite plates via FSDT meshless method,” International Journal of Mechanical Sciences, vol. 44, no. 7, pp. 1275–1293, 2002. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  14. K. M. Liew and X. L. Chen, “Buckling of rectangular Mindlin plates subjected to partial in-plane edge loads using the radial point interpolation method,” International Journal of Solids and Structures, vol. 41, no. 5-6, pp. 1677–1695, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  15. S. Kshirsagar and K. Bhaskar, “Accurate and elegant free vibration and buckling studies of orthotropic rectangular plates using untruncated infinite series,” Journal of Sound and Vibration, vol. 314, no. 3–5, pp. 837–850, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. Ö. Civalek, A. Korkmaz, and Ç. Demir, “Discrete singular convolution approach for buckling analysis of rectangular Kirchhoff plates subjected to compressive loads on two-opposite edges,” Advances in Engineering Software, vol. 41, no. 4, pp. 557–560, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  17. O. Vaseghi, H. R. Mirdamadi, and D. Panahandeh-Shahraki, “Non-linear stability analysis of laminated composite plates on one-sided foundation by hierarchical Rayleigh-Ritz and finite elements,” International Journal of Non-Linear Mechanics, vol. 57, pp. 65–74, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. F. Millar and D. Mora, “A finite element method for the buckling problem of simply supported Kirchhoff plates,” Journal of Computational and Applied Mathematics, vol. 286, pp. 68–78, 2015. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  19. Y. K. Cheung, L. G. Tham, and W. Y. Li, “Free vibration and static analysis of general plate by spline finite strip,” Computational Mechanics, vol. 3, no. 3, pp. 187–197, 1988. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  20. T. Mizusawa, “Buckling of rectangular Midlin plates with tapered thickness by the spline strip method,” International Journal of Solids and Structures, vol. 30, no. 12, pp. 1663–1677, 1993. View at Publisher · View at Google Scholar · View at Scopus
  21. D. J. Dawe and S. Wang, “Spline finite strip analysis of the buckling and vibration of rectangular composite laminated plates,” International Journal of Mechanical Sciences, vol. 37, no. 6, pp. 645–667, 1995. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  22. W. J. Wang, Y. P. Tseng, and K. J. Lin, “Stability of laminated plates using finite strip method based on a higher-order plate theory,” Composite Structures, vol. 34, no. 1, pp. 65–76, 1996. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Wang and D. J. Dawe, “Buckling of composite shell structures using the spline finite strip method,” Composites Part B: Engineering, vol. 30, no. 4, pp. 351–364, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. W.-C. Xie and A. Ibrahim, “Buckling mode localization in rib-stiffened plates with misplaced stiffeners—a finite strip approach,” Chaos, Solitons & Fractals, vol. 11, no. 10, pp. 1543–1558, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. K. Cheung and L. G. Tham, “A review of the finite strip method,” Progress in Structural Engineering and Materials, vol. 2, no. 3, pp. 369–375, 2000. View at Publisher · View at Google Scholar
  26. S. Wang and Y. Zhang, “Vibration analysis of rectangular composite laminated plates using layerwise B-spline finite strip method,” Composite Structures, vol. 68, no. 3, pp. 349–358, 2005. View at Publisher · View at Google Scholar
  27. L. Yongqiang, “Free vibration analysis of plate using finite strip Fourier p-element,” Journal of Sound and Vibration, vol. 294, no. 4, pp. 1051–1059, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. H. R. Ovesy and H. Assaee, “An investigation on the post-buckling behavior of symmetric cross-ply laminated plates using a semi-energy finite strip approach,” Composite Structures, vol. 71, no. 3-4, pp. 365–370, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. H. Assaee and H. R. Ovesy, “A multi-term semi-energy finite strip method for post-buckling analysis of composite plates,” International Journal for Numerical Methods in Engineering, vol. 70, no. 11, pp. 1303–1323, 2007. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  30. H. R. Ovesy and J. Fazilati, “Stability analysis of composite laminated plate and cylindrical shell structures using semi-analytical finite strip method,” Composite Structures, vol. 89, no. 3, pp. 467–474, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. H. R. Ovesy, A. Totounferoush, and S. A. M. Ghannadpour, “Dynamic buckling analysis of delaminated composite plates using semi-analytical finite strip method,” Journal of Sound and Vibration, vol. 343, pp. 131–143, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Tarasovs and J. Andersons, “Buckling of a coating strip of finite width bonded to elastic half-space,” International Journal of Solids and Structures, vol. 45, no. 2, pp. 593–600, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  33. H. C. Bui, “Semi-analytical finite strip method based on the shallow shell theory in buckling analysis of cold-formed sections,” Thin-Walled Structures, vol. 50, no. 1, pp. 141–146, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. G. J. Hancock and C. H. Pham, “Buckling analysis of thin-walled sections under localised loading using the semi-analytical finite strip method,” Thin-Walled Structures, vol. 86, pp. 35–46, 2015. View at Publisher · View at Google Scholar · View at Scopus
  35. S. Ádány and B. W. Schafer, “Buckling mode decomposition of single-branched open cross-section members via finite strip method: derivation,” Thin-Walled Structures, vol. 44, no. 5, pp. 563–584, 2006. View at Publisher · View at Google Scholar · View at Scopus
  36. S. Ádány and B. W. Schafer, “Buckling mode decomposition of single-branched open cross-section members via finite strip method: application and examples,” Thin-Walled Structures, vol. 44, no. 5, pp. 585–600, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. Z. Li, J. C. Batista Abreu, J. Leng, S. Ádány, and B. W. Schafer, “Review: constrained finite strip method developments and applications in cold-formed steel design,” Thin-Walled Structures, vol. 81, pp. 2–18, 2014. View at Publisher · View at Google Scholar · View at Scopus
  38. S. Ádány and B. W. Schafer, “Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: secondary modes, orthogonality, examples,” Thin-Walled Structures, vol. 84, pp. 123–133, 2014. View at Publisher · View at Google Scholar · View at Scopus
  39. S. Ádány and B. W. Schafer, “Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: primary modes,” Thin-Walled Structures, vol. 84, pp. 150–169, 2014. View at Publisher · View at Google Scholar · View at Scopus
  40. Z. Li, M. T. Hanna, S. Ádány, and B. W. Schafer, “Impact of basis, orthogonalization, and normalization on the constrained Finite Strip Method for stability solutions of open thin-walled members,” Thin-Walled Structures, vol. 49, no. 9, pp. 1108–1122, 2011. View at Publisher · View at Google Scholar · View at Scopus
  41. R. Uhrig, “The transfer matrix method seen as one method of structural analysis among others,” Journal of Sound and Vibration, vol. 4, no. 2, pp. 136–148, 1966. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  42. T. J. McDaniel and K. B. Eversole, “A combined finite element-transfer matrix structural analysis method,” Journal of Sound and Vibration, vol. 51, no. 2, pp. 157–169, 1977. View at Publisher · View at Google Scholar · View at Scopus
  43. G. Chiatti and A. Sestieri, “Analysis of static and dynamic structural problems by a combined finite element-transfer matrix method,” Journal of Sound and Vibration, vol. 67, no. 1, pp. 35–42, 1979. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  44. M. Ohga, T. Shigematsu, and T. Hara, “Structural analysis by a combined boundary element-transfer matrix method,” Computers & Structures, vol. 24, no. 3, pp. 385–389, 1986. View at Publisher · View at Google Scholar · View at Scopus
  45. M. Ohga and T. Shigematsu, “Analysis of continuous plates by a combined boundary element-transfer matrix method,” Computers & Structures, vol. 36, no. 1, pp. 81–89, 1990. View at Publisher · View at Google Scholar · View at Scopus
  46. C. Yuhua, “Large deflection analysis of structures by an improved combined finite element-transfer matrix method,” Computers & Structures, vol. 55, no. 1, pp. 167–171, 1995. View at Publisher · View at Google Scholar · View at Scopus
  47. X. Rui, B. He, Y. Lu, W. Lu, and G. Wang, “Discrete time transfer matrix method for multibody system dynamics,” Multibody System Dynamics, vol. 14, no. 3-4, pp. 317–344, 2005. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  48. B. Rong, “Efficient dynamics analysis of large-deformation flexible beams by using the absolute nodal coordinate transfer matrix method,” Multibody System Dynamics, vol. 32, no. 4, pp. 535–549, 2014. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  49. F. Chevillotte and R. Panneton, “Coupling transfer matrix method to finite element method for analyzing the acoustics of complex hollow body networks,” Applied Acoustics, vol. 72, no. 12, pp. 962–968, 2011. View at Publisher · View at Google Scholar · View at Scopus
  50. D. Li, G. Tang, J. Zhou, and Y. Lei, “Buckling analysis of a plate with built-in rectangular delamination by strip distributed transfer function method,” Acta Mechanica, vol. 176, no. 3-4, pp. 231–243, 2005. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  51. Y. Kang, Y.-G. Lee, and S.-C. Chen, “Instability analysis of unsymmetrical rotor-bearing systems using the transfer matrix method,” Journal of Sound and Vibration, vol. 199, no. 3, pp. 381–400, 1997. View at Publisher · View at Google Scholar · View at Scopus
  52. E. S. Kameshki and S. Syngellakis, “Inelastic stability of rectangular frames by transfer matrices,” Computers & Structures, vol. 73, no. 1–5, pp. 373–383, 1999. View at Publisher · View at Google Scholar · View at Scopus
  53. M. A. Bradford and M. Azhari, “Buckling of plates with different end conditions using the finite strip method,” Computers & Structures, vol. 56, no. 1, pp. 75–83, 1995. View at Publisher · View at Google Scholar · View at Scopus
  54. E. Ruocco and M. Fraldi, “Critical behavior of flat and stiffened shell structures through different kinematical models: a comparative investigation,” Thin-Walled Structures, vol. 60, pp. 205–215, 2012. View at Publisher · View at Google Scholar · View at Scopus