Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015 (2015), Article ID 514267, 10 pages
http://dx.doi.org/10.1155/2015/514267
Research Article

An Analytical Insight into the Buckling Paradox for Circular Cylindrical Shells under Axial and Lateral Loading

1Department of Mechanical, Aerospace and Civil Engineering, Brunel University, Uxbridge UB8 3PH, UK
2Department of Structural Engineering, University of Naples “Federico II”, Via Claudio 21, 80125 Naples, Italy

Received 23 December 2014; Accepted 28 May 2015

Academic Editor: Xin-Lin Gao

Copyright © 2015 Rabee Shamass et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Hill, The Mathematical Theoy of Plasticity, Clarendon Press, Oxford University Press, New York, NY, USA, 1998. View at MathSciNet
  2. A. Mendelson, Plasticity: Theory and Application, Macmillan Company, New York, NY, USA, 1968.
  3. R. Shamass, G. Alfano, and F. Guarracino, “A numerical investigation into the plastic buckling paradox for circular cylindrical shells under axial compression,” Engineering Structures, vol. 75, pp. 429–447, 2014. View at Google Scholar
  4. R. Shamass, G. Alfano, and F. Guarracino, “A numerical investigation into the plastic buckling of circular cylinders,” in Shell Structures: Theory and Application, W. Pietraszkiewicz and J. Górski, Eds., vol. 3, pp. 441–444, CRC Press, New York, NY, USA, 2013. View at Google Scholar
  5. J. Blachut, G. D. Galletly, and S. James, “On the plastic buckling paradox for cylindrical shells,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 210, no. 5, pp. 477–488, 1996. View at Publisher · View at Google Scholar · View at Scopus
  6. J. J. Giezen, C. D. Babcock, and J. Singer, “Plastic buckling of cylindrical shells under biaxial loading,” Experimental Mechanics, vol. 31, no. 4, pp. 337–343, 1991. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Bushnell, “BOSOR5—program for buckling of complex, branched shells of revolution including large deflections, plasticity and creep,” in Structural Analysis Systems, A. Niku-Lari, Ed., vol. 2, pp. 25–54, Pergamon Press, New York, NY, USA, 1986. View at Google Scholar
  8. R. Shamass, G. Alfano, and F. Guarracino, “An investigation into the plastic buckling paradox for circular cylindrical shells under non-proportional loading,” Thin-Walled Structures. In press.
  9. J. J. Giezen, Plastic buckling of cylinders under biaxial loading [Ph.D. thesis], GALCIT, California Institute of Technology, Pasadena, Calif, USA, 1988, SM 88-23.
  10. R. Peek, “An incrementally continuous deformation theory of plasticity with unloading,” International Journal of Solids and Structures, vol. 37, no. 36, pp. 5009–5032, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Jahed, S. B. Lambert, and R. N. Dubey, “Total deformation theory for non-proportional loading,” International Journal of Pressure Vessels and Piping, vol. 75, no. 8, pp. 633–642, 1998. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Chakrabarty, Applied Plasticity, Springer, New York, NY, USA, 2nd edition, 2010.
  13. Simulia, ABAQUS Theory Manual. Version 6.11-1, Dassault Systems, Waltham, Mass, USA, 2011.
  14. J. C. Simo and T. J. R. Hughes, Computational Inelasticity, Springer, Berlin, Germany, 1998. View at MathSciNet
  15. A. H. Chilver, “Coupled modes of elastic buckling,” Journal of the Mechanics and Physics of Solids, vol. 15, no. 1, pp. 15–28, 1967. View at Publisher · View at Google Scholar · View at Scopus
  16. W. J. Supple, “On the change in buckle pattern in elastic structures,” International Journal of Mechanical Sciences, vol. 10, no. 9, pp. 737–745, 1968. View at Publisher · View at Google Scholar · View at Scopus
  17. F. Guarracino and A. C. Walker, “Some comments on the numerical analysis of plates and thin-walled structures,” Thin-Walled Structures, vol. 46, no. 7–9, pp. 975–980, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Fraldi and F. Guarracino, “Towards an accurate assessment of UOE pipes under external pressure: effects of geometric imperfection and material inhomogeneity,” Thin-Walled Structures, vol. 63, pp. 147–162, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Fraldi and F. Guarracino, “Stability analysis of circular beams with mixed-mode imperfections under uniform lateral pressure,” Advances in Mechanical Engineering, vol. 2014, Article ID 294507, 7 pages, 2014. View at Publisher · View at Google Scholar