Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015 (2015), Article ID 575492, 9 pages
http://dx.doi.org/10.1155/2015/575492
Research Article

Application of Multiphysics Coupling FEM on Open Wellbore Shrinkage and Casing Remaining Strength in an Incomplete Borehole in Deep Salt Formation

College of Mechatronic Engineering, Southwest Petroleum University, Chengdu 610500, China

Received 10 September 2014; Revised 2 December 2014; Accepted 12 December 2014

Academic Editor: Chenfeng Li

Copyright © 2015 Hua Tong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Lao, M. S. Bruno, and V. Serajian, “Analysis of salt creep and well casing damage in high pressure and high temperature environments,” in Proceedings of the Conference on Offshore Technology (OTC '12), paper no. OTC 23654, Houston, Tex, USA, April-May 2012. View at Publisher · View at Google Scholar
  2. W. Delang, “Reasons and analysis of casing damagein Zhongyuan oil field,” Petroleum Drilling Techniques, vol. 31, no. 4, pp. 36–38, 2003. View at Google Scholar
  3. W. Tao, Y. Shenglai, Z. Weihong et al., “Law and countermeasures for the casing damage of oil production wells and water injection wells in Tarim Oilfield,” Petroleum Exploration and Development, vol. 38, no. 3, pp. 352–361, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. W. Wang and A. Dahi Taleghani, “Emergence and propagation of delamination cracks along the casing-cement interface,” in Proceedings of the 46th US Rock Mechanics/Geomechanics Symposium, Paper no. ARMA 12-449, pp. 1819–1914, Chicago, Ill, USA, June 2012. View at Scopus
  5. J. Liu, L. Zhang, and J. Zhao, “Numerical simulation on open wellbore shrinkage and casing equivalent stress in bedded salt rock stratum,” The Scientific World Journal, vol. 2013, Article ID 718196, 5 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. S. M. Willson, A. F. Fossum, and J. T. Fredrich, “Assessment of salt loading on well casings,” SPE Drilling & Completion, vol. 18, no. 1, pp. 13–21, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. X. Shen, “Numerical analysis of casing failure under non-uniform loading in subsalt wells in paradox basin,” in Proceedings of the Conference on 45th US Rock Mechanics/Geomechanics Symposium, Paper ARMA 11-176, American Rock Mechanics Association, San Francisco, Calif, USA, 2011.
  8. P. D. Pattillo, N. C. Last, and W. T. Asbill, “Effect of nonuniform loading on conventional casing collapse resistance,” SPE Drilling and Completion, vol. 19, no. 3, pp. 156–163, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Shen and F. E. Beck, “Intermediate casing collapse induced by casing wear in high-temperature and high-pressure wells,” in Proceedings of the SPE Production and Operations Symposium, pp. 312–322, Doha, Qatar, May 2012. View at Scopus
  10. I. A. Kalil and A. R. McSpadden, “Casing burst stresses in particulate-filled annuli: where is the cement?” SPE Drilling & Completion, vol. 27, no. 4, pp. 473–485, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. Z. Yuan, C. Teodoriu, and J. Schubert, “Low cycle cement fatigue experimental study and the effect on HPHT well integrity,” Journal of Petroleum Science and Engineering, vol. 105, pp. 84–90, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. X. Zhu, S. Liu, and H. Tong, “Plastic limit analysis of defective casing for thermal recovery wells,” Engineering Failure Analysis, vol. 27, pp. 340–349, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Wang, A. Kumar, and R. Samuel, “Geomechanical modeling of wellbore stability in anisotropic salt formation,” in Proceedings of the SPE Conference on Latin American and Caribbean Petroleum Engineering, Paper no. SPE-169458-MS, Maracaibo, Venezuela, May 2014.
  14. X. Wang, Finite Element Method, Tsinghua University Press, Beijing, China, 1st edition, 2003.
  15. W. E. Haisler and D. R. Sanders, “Elastic-plastic-creep-large strain analysis at elevated temperature by the finite element method,” Computers and Structures, vol. 10, no. 1-2, pp. 375–381, 1979. View at Publisher · View at Google Scholar · View at Scopus
  16. N. A. Cyr and R. D. Teter, “Finite element elastic-plastic-creep analysis of two-dimensional continuum with temperature dependent material properties,” Computers & Structures, vol. 3, no. 4, pp. 849–863, 1973. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Jelwan, M. Chowdhury, and G. Pearce, “Design for creep: a critical examination of some methods,” Engineering Failure Analysis, vol. 27, pp. 350–372, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. W. Ge, M. Chen, Y. Jin et al., “Analysis of the external pressure on casings induced by salt-gypsum creep in build-up sections for horizontal wells,” Rock Mechanics and Rock Engineering, vol. 44, no. 6, pp. 711–723, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Ping, D. Jin-gen, S. Yan, Y. Xin-jiang, and X. Xian-guang, “Experimental study of creep characteristics of rock gypsum-salt and rock salt in Chuandong gas field,” Rock and Soil Mechanics, vol. 33, no. 2, pp. 444–448, 2012. View at Google Scholar
  20. L. Bo, Research on mechanics performance of cement and downhole working load adaptability [Master's, thesis], Northeast Petroleum Institute, Heilongjiang, China, 2011.
  21. R. S. Rubiandini, “New additive for improving shearbond strength in high temperature and pressure cement,” in Proceedings of the IADC/SPE Conference on Asia Pacific Drilling Technology, paper no. IADC/SPE-62750-MS, Kuala Lumpur, Malaysia, September 2000.
  22. J. C. R. Placido, P. Ademar, L. A. B. F. Paulo, I. P. Pasqualino, and S. F. Estefen, “Stress-analysis of casing string submitted to cyclic steam injection,” in Proceedings of the SPE Conference on 5h Latin American and Caribbean Petroleum Engineering, Paper No. SPE 38978, Rio de Janeiro, Brazil, August-September 1997.