Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 635602, 13 pages
http://dx.doi.org/10.1155/2015/635602
Research Article

Study on Resource Configuration on Cloud Manufacturing

1The State Key Laboratory of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China
2Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China

Received 27 March 2015; Revised 15 July 2015; Accepted 2 August 2015

Academic Editor: Lihui Wang

Copyright © 2015 Yanlong Cao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. A. Lee, “Cyber-physical systems—are computing foundations adequate?” in Proceedings of the NSF Workshop on Cyber-Physical Systems: Research Motivation, Techniques and Roadmap, vol. 2 of Position Paper, Austin, Tex, USA, October 2006.
  2. R. Rajkumar, I. Lee, L. Sha, and J. Stankovic, “Cyber-physical systems: the next computing revolution,” in Proceedings of the 47th ACM/IEEE Design Automation Conference (DAC '10), pp. 731–736, ACM, Anaheim, Calif, USA, June 2010.
  3. L. Wang, M. Törngren, and M. Onori, “Current status and advancement of cyber-physical systems in manufacturing,” Journal of Manufacturing Systems, 2015. View at Publisher · View at Google Scholar
  4. B.-H. Li, L. Zhang, L. Ren et al., “Further discussion on cloud manufacturing,” Computer Integrated Manufacturing Systems, vol. 17, no. 3, pp. 449–457, 2011. View at Google Scholar · View at Scopus
  5. F. Tao, L. Zhang, H. Guo, Y.-L. Luo, and L. Ren, “Typical characteristics of cloud manufacturing and several key issues of cloud service composition,” Computer Integrated Manufacturing Systems, vol. 17, no. 3, pp. 477–486, 2011. View at Google Scholar · View at Scopus
  6. R. Buyya, C. S. Yeo, S. Venugopal, J. Broberg, and I. Brandic, “Cloud computing and emerging IT platforms: vision, hype, and reality for delivering computing as the 5th utility,” Future Generation Computer Systems, vol. 25, no. 6, pp. 599–616, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. E. A. Lee, “Cyber physical systems: design challenges,” in Proceedings of the 11th IEEE Symposium on Object Oriented Real-Time Distributed Computing (ISORC '08), pp. 363–369, IEEE, Orlando, Fla, USA, May 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Sharifi, G. Colquhoun, I. Barclay, and Z. Dann, “Agile manufacturing: a management and operational framework,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 215, no. 6, pp. 857–869, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Mitsuishi and T. Nagao, “Networked manufacturing with reality sensation for technology transfer,” CIRP Annals-Manufacturing Technology, vol. 48, no. 1, pp. 409–412, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. C. F. Bremer, “From an opportunity identification to its manufacturing: a reference model for Virtual Enterprises,” CIRP Annals—Manufacturing Technology, vol. 49, no. 1, pp. 325–330, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Kara, S. Manmek, and C. Herrmann, “Global manufacturing and the embodied energy of products,” CIRP Annals-Manufacturing Technology, vol. 59, no. 1, pp. 29–32, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Shah and P. T. Ward, “Lean manufacturing: context, practice bundles, and performance,” Journal of Operations Management, vol. 21, no. 2, pp. 129–149, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Chryssolouris, D. Mavrikios, N. Papakostas, D. Mourtzis, G. Michalos, and K. Georgoulias, “Digital manufacturing: history, perspectives, and outlook,” Proceedings of the Institution of Mechanical Engineers. Part B: Journal of Engineering Manufacture, vol. 223, no. 5, pp. 451–462, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Meier, R. Roy, and G. Seliger, “Industrial product-service systems-IPS2,” CIRP Annals—Manufacturing Technology, vol. 59, no. 2, pp. 607–627, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Tao, L. Zhang, and A. Y. C. Nee, “A review of the application of grid technology in manufacturing,” International Journal of Production Research, vol. 49, no. 13, pp. 4119–4155, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Tao, “Shifting paradigms with the application service provider model,” Computer, vol. 34, no. 10, pp. 32–39, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Fan, D. Zhao, L. Zhang, S. Huang, and B. Liu, “Manufacturing grid: needs, concept, and architecture,” in Grid and Cooperative Computing, vol. 3032 of Lecture Notes in Computer Science, pp. 653–656, Springer, Berlin, Germany, 2004. View at Publisher · View at Google Scholar
  18. Y. Zhang, G. Zhang, Y. Liu, and D. Hu, “Research on services encapsulation and virtualization access model of machine for cloud manufacturing,” Journal of Intelligent Manufacturing, 2015. View at Publisher · View at Google Scholar
  19. D. Wu, D. W. Rosen, L. Wang, and D. Schaefer, “Cloud-based design and manufacturing: a new paradigm in digital manufacturing and design innovation,” Computer-Aided Design, vol. 59, pp. 1–14, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Jiao, J. Zhang, J. H. Li, and J. Shi, “Research on cloud manufacturing service discovery based on latent semantic preference about OWL-S,” International Journal of Computer Integrated Manufacturing, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. L. Zhang, Y. Luo, F. Tao et al., “Cloud manufacturing: a new manufacturing paradigm,” Enterprise Information Systems, vol. 8, no. 2, pp. 167–187, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Helo, M. Suorsa, Y. Hao, and P. Anussornnitisarn, “Toward a cloud-based manufacturing execution system for distributed manufacturing,” Computers in Industry, vol. 65, no. 4, pp. 646–656, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. B. Huang, C. Li, C. Yin, and X. Zhao, “Cloud manufacturing service platform for small- and medium-sized enterprises,” The International Journal of Advanced Manufacturing Technology, vol. 65, no. 9–12, pp. 1261–1272, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Cao, S. Wang, L. Kang, C. Li, and L. Guo, “Study on machining service modes and resource selection strategies in cloud manufacturing,” The International Journal of Advanced Manufacturing Technology, 2015. View at Publisher · View at Google Scholar
  25. Y. Laili, F. Tao, L. Zhang, and B. R. Sarker, “A study of optimal allocation of computing resources in cloud manufacturing systems,” The International Journal of Advanced Manufacturing Technology, vol. 63, no. 5–8, pp. 671–690, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. F. Tao, Y. Cheng, L. D. Xu, L. Zhang, and B. H. Li, “CCIoT-CMfg: cloud computing and internet of things-based cloud manufacturing service system,” IEEE Transactions on Industrial Informatics, vol. 10, no. 2, pp. 1435–1442, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Qanbari, F. Li, and S. Dustdar, “Toward portable cloud manufacturing services,” IEEE Internet Computing, vol. 18, no. 6, pp. 77–80, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. J. Liu, W. Xu, and H. Zhan, “Multi-source and heterogeneous knowledge organization and representation for knowledge fusion in cloud manufacturing,” in Proceedings of International Conference on Soft Computing Techniques and Engineering Application, vol. 250 of Advances in Intelligent Systems and Computing, pp. 55–61, Springer, New Delhi, India, 2014. View at Publisher · View at Google Scholar
  29. D. Jannach and M. Zanker, “Modeling and solving distributed configuration problems: a CSP-based approach,” IEEE Transactions on Knowledge and Data Engineering, vol. 25, no. 3, pp. 603–618, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. G. Qi, X. Gu, and J. Tan, Technology and Application of Design for Mass Customization, China Machine Press, Beijing, China, 2003.
  31. V. Gruhn, R. Ijioui, D. Peters, and C. Schäfer, “Configuration management for Lyee software,” Knowledge-Based Systems, vol. 16, no. 7-8, pp. 441–447, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. T. W. Carnduff and J. S. Goonetillake, “Configuration management in evolutionary engineering design using versioning and integrity constraints,” Advances in Engineering Software, vol. 35, no. 3-4, pp. 161–177, 2004. View at Publisher · View at Google Scholar · View at Scopus
  33. D. Sabin and R. Weigel, “Product configuration frameworks—a survey,” IEEE Intelligent Systems and Their Applications, vol. 13, no. 4, pp. 42–49, 1998. View at Publisher · View at Google Scholar · View at Scopus
  34. S. Wang, J. Tan, S. Zhang, X. Wang, and C. He, “Case-based product configuration and reuse in mass customization,” Chinese Journal of Mechanical Engineering, vol. 17, no. 2, pp. 233–236, 2004. View at Publisher · View at Google Scholar · View at Scopus
  35. J. A. W. Gut and J. M. Pinto, “Optimal configuration design for plate heat exchangers,” International Journal of Heat and Mass Transfer, vol. 47, no. 22, pp. 4833–4848, 2004. View at Publisher · View at Google Scholar · View at Scopus
  36. S. Myung and S. Han, “Knowledge-based parametric design of mechanical products based on configuration design method,” Expert Systems with Applications, vol. 21, no. 2, pp. 99–107, 2001. View at Publisher · View at Google Scholar · View at Scopus
  37. N. A. Staudenmayer, M. Tripsas, and C. L. Tucci, “Interfirm modularity and its implications for product development,” Journal of Product Innovation Management, vol. 22, no. 4, pp. 303–321, 2005. View at Publisher · View at Google Scholar · View at Scopus
  38. Y. Narahari, R. Sudarsan, K. W. Lyons, M. R. Duffey, and R. D. Sriram, “Design for tolerance of electro-mechanical assemblies: an integrated approach,” IEEE Transactions on Robotics and Automation, vol. 15, no. 6, pp. 1062–1079, 1999. View at Publisher · View at Google Scholar · View at Scopus
  39. H. Zhang, Y. Cao, Y. Wei et al., “A concurrent design method for functional tolerance and structure based on the principle of decomposition and reconstitution,” Procedia CIRP, vol. 10, pp. 194–202, 2013. View at Google Scholar
  40. J. Yang, K. Huang, and Z. Huo, “Function surface-based growth design theory,” Chinese Journal of Mechanical Engineering, vol. 44, no. 4, pp. 29–35, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. Z. Wu and J. Yang, Computer-Aided Tolerancing, Zhejiang University Press, Hangzhou, China, 1999.