Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 851548, 22 pages
http://dx.doi.org/10.1155/2015/851548
Research Article

Determination of the Stress State of a Piecewise Homogeneous Elastic Body with a Row of Cracks on an Interface Surface Subject to Antiplane Strains with Inclusions at the Tips

Institute of Mechanics, National Academy of Sciences, 24 b M. Baghramian Avenue, 0019 Yerevan, Armenia

Received 6 January 2015; Accepted 11 March 2015

Academic Editor: Christopher Pretty

Copyright © 2015 Ali Golsoorat Pahlaviani and Suren Mkhitaryan. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. P. Pook, F. Berto, A. Campagnolo, and P. Lazzarin, “Couple fracture mode of a cracked disc under antiplane loading,” Engineering Fracture Mechanics, vol. 128, pp. 22–36, 2014. View at Google Scholar
  2. L. P. Pook, “A 50-year retrospective review of three-dimensional effects at cracks and sharp notches,” Fatigue and Fracture of Engineering Materials and Structures, vol. 36, no. 8, pp. 699–723, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Kotousov, P. Lazzarin, F. Berto, and L. P. Pook, “Three-dimensional stress states at crack tip induced by shear and anti-plane loading,” Engineering Fracture Mechanics, vol. 108, pp. 65–74, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. L. P. Pook, A. Campagnolo, F. Berto, and P. Lazzarin, “Coupled fracture mode of a cracked plate under anti-plane loading,” Engineering Fracture Mechanics, vol. 134, pp. 391–403, 2015. View at Publisher · View at Google Scholar
  5. L. Harold, Fracture: An Advanced Treatise Mathematical Fundamentals, vol. 1, Academic Press, New York, NY, USA, 1968.
  6. G. P. Cherepanov, Fracture Mechanics, Nauka, Moscow, Russia, 1974.
  7. V. V. Panasjuk, M. P. Savruk, and A. P. Datsyshyn, The Stress Distribution in The Neighborhood of Cracks of Plates and Shells, Naukova Dumka, Kiev, Ukraine, 1976.
  8. Y. Murakami, Stress Intensity Factors Handbook, vol. 1, Pergamon Press, New York, NY, USA, 1987.
  9. Y. Murakami, Stress Intensity Factors Handbook 2, Pergamon Press, New York, NY, USA, 1987.
  10. M. P. Savruk, “The stress intensity factors in cracked bodies,” in Fracture Mechanics and Strength of Materials Handbook, vol. 2, p. 619, 1988. View at Google Scholar
  11. M. Zappalorto and P. Lazzarin, “Three-dimensional elastic stress fields ahead of notches in thick plates under various loading conditions,” Engineering Fracture Mechanics, vol. 108, pp. 75–88, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Kotousov, F. Berto, P. Lazzarin, and F. Pegorin, “Three dimensional finite element mixed fracture mode under anti-plane loading of a crack,” Theoretical and Applied Fracture Mechanics, vol. 62, no. 1, pp. 26–33, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Campagnolo, F. Berto, and P. Lazzarin, “The effects of different boundary conditions on three-dimensional cracked discs under anti-plane loading,” European Journal of Mechanics A: Solids, vol. 50, pp. 76–86, 2015. View at Publisher · View at Google Scholar · View at MathSciNet
  14. A. Boulenouar, N. Benseddiq, and M. Mazari, “Strain energy density prediction of crack propagation for 2D linear elastic materials,” Theoretical and Applied Fracture Mechanics, vol. 67-68, pp. 29–37, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Fu, K. Hu, Z. Chen, L. Chen, and L. Qian, “A moving crack propagating in a functionally graded magnetoelectroelastic strip under different crack face conditions,” Theoretical and Applied Fracture Mechanics, vol. 66, pp. 16–25, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. P. C. Gope, N. Bisht, and V. K. Singh, “Influence of crack offset distance on interaction of multiple collinear and offset edge cracks in a rectangular plate,” Theoretical and Applied Fracture Mechanics, vol. 70, pp. 19–29, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Misseroni, F. Dal Corso, S. Shahzad, and D. Bigoni, “Stress concentration near stiff inclusions: validation of rigid inclusion model and boundary layers by means of photo elasticity,” Engineering Fracture Mechanics, vol. 121-122, pp. 87–97, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Noselli, F. Dal Corso, and D. Bigoni, “The stress intensity near a stiffener disclosed by photoelasticity,” International Journal of Fracture, vol. 166, no. 1-2, pp. 91–103, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. R. Ghajar and A. Shaghaghi Moghaddam, “Numerical investigation of the mode III stress intensity factors in FGMs considering the effect of graded Poisson's ratio,” Engineering Fracture Mechanics, vol. 78, no. 7, pp. 1478–1486, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. A. Hernández-Pérez, F. Avilés, and L. A. Carlsson, “Evaluation of the plate twist test to characterize mode III fracture of sandwich panels with a face/core interface crack,” Engineering Fracture Mechanics, vol. 104, pp. 41–55, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Okada, H. Kawai, and K. Araki, “A virtual crack closure-integral method (VCCM) to compute the energy release rates and stress intensity factors based on quadratic tetrahedral finite elements,” Engineering Fracture Mechanics, vol. 75, no. 15, pp. 4466–4485, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. D. Chang and A. Kotousov, “A strip yield model for two collinear cracks in plates of arbitrary thickness,” International Journal of Fracture, vol. 176, no. 1, pp. 39–47, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. D. Chang and A. Kotousov, “A strip yield model for two collinear cracks,” Engineering Fracture Mechanics, vol. 90, pp. 121–128, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. V. A. Kryven, “Antiplane deformation of an elasto plastic body weakened by a double periodic system of notches,” Fizyko-Khimichna Mekanika Materialiv, vol. 1, pp. 31–33, 1979. View at Google Scholar
  25. V. A. Kryvn, G. T. Sulym, and M. I. Yavorska, “Plastic interfacial slip of periodic systems of rigid thin inclusions undergoing longitudinal shear,” Theoretical and Applied Fracture Mechanics, vol. 44, pp. 837–848, 2006. View at Google Scholar
  26. I. N. Sneddon, Fourier Transforms, Courier, New York, NY, USA, 1951. View at MathSciNet
  27. P. S. Theocharis and N. I. Iokimidis, “Numerical integration methods for the solution of singular integral equations,” Quarterly of Applied Mathematics, vol. 1, no. 35, pp. 173–185, 1977. View at Google Scholar
  28. F. Erdogan, G. D. Gupta, and T. S. Cook, “The numerical solutions of singular integral equations,” in Methods of Analysis and Solution of Crack Problems Mechanics of Fracture, vol. 1, pp. 368–425, 1973. View at Google Scholar
  29. D. I. Bardzokas, S. H. Gevorgyan, and S. M. Mkhitaryan, “About a stress deformation condition of a piecewise-uniform wedge with a system of collinear cracks at an antiplane deformation,” Mathematical Problems in Engineering, vol. 2005, no. 2, pp. 245–268, 2005. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  30. S. M. Mkhitaryan and A. G. Pahlaviani, “The stress distribution field of piecewise homogeneous elastic rectangular plate with a system of collinear cracks subject to antiplane deformations,” in Proceedings of the 2nd International Scientific and Technical Conference Architecture and Construction Contemporary Problems, vol. 2, pp. 295–303, 2010.
  31. N. Gerolymos and G. Gazetas, “Development of Winkler model for static and dynamic response of caisson foundations with soil and interface nonlinearities,” Soil Dynamics and Earthquake Engineering, vol. 26, no. 5, pp. 363–376, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. D. S. Dugdale, “Yielding of steel sheets Containing slits,” Journal of the Mechanics and Physics of Solids, vol. 8, no. 2, pp. 100–104, 1960. View at Publisher · View at Google Scholar · View at Scopus
  33. G. I. Barenblatt, “The mathematical theory of equilibrium cracks in brittle fracture,” in Advances in Applied Mechanics, vol. 7, pp. 55–129, Academic Press, 1962. View at Google Scholar · View at MathSciNet
  34. A. G. Pahlaviani, “Main characteristics of fracture failure of a piecewise homogeneous elastic plate with crack subject to antiplane deformations,” in Proceedings of the 2nd International Scientific and Technical Conference Architecture and Construction Contemporary Problems, vol. 2, pp. 304–310, 2010.
  35. P. S. Theocaris and S. A. Paipetis, “State of stress around inhomogeneities by the method of caustics,” Fibre Science and Technology, vol. 9, no. 1, pp. 19–39, 1976. View at Publisher · View at Google Scholar · View at Scopus
  36. P. S. Theocaris and S. A. Paipetis, “Constrained zones at singular points of inclusion contours,” International Journal of Mechanical Sciences, vol. 18, no. 11-12, pp. 581–587, 1976. View at Publisher · View at Google Scholar · View at Scopus