Research Article
Position and Thickness Optimization of Ribs for Ventilation Covering Using the Micro Genetic Algorithm with an Interpolated Smooth Objective Function
Table 1
Optimization results of each method.
| Evaluation index | Design parameters | Initial state | Fixed position (gradient) | MGA (step function) | MGA (interpolated continuous function) |
| Design variables | Thickness (, mm) | 10 | 9.244 | 9.043 | 7.062 | Thickness (, mm) | 10 | 3.249 | 4.313 | 4.859 | Thickness (, mm) | 10 | 3.249 | 4.983 | 3.496 | Thickness (, mm) | 10 | 9.244 | 6.265 | 7.778 | Position set () | (5, 8, 11, 14) | (5, 8, 11, 14) | (5, 8, 12, 14) | (5, 7, 12, 14) |
| Objective | Weight (, Mg) | 0.195 | 0.122 | 0.119 | 0.113 |
| Constraints | von Mises stress (σ, MPa) (<50.000 MPa) | 33.430 | 45.400 | 49.100 | 49.930 |
|
|