Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015 (2015), Article ID 918296, 18 pages
http://dx.doi.org/10.1155/2015/918296
Research Article

A High Power Density Integrated Charger for Electric Vehicles with Active Ripple Compensation

1School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
2Department of Electrical and Electronic Engineering, University of Bristol, Bristol BS8 1TH, UK

Received 1 August 2015; Revised 14 October 2015; Accepted 18 October 2015

Academic Editor: Xiaosong Hu

Copyright © 2015 Liwen Pan and Chengning Zhang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Sun and R. Xiong, “A novel dual-scale cell state-of-charge estimation approach for series-connected battery pack used in electric vehicles,” Journal of Power Sources, vol. 274, pp. 582–594, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Yilmaz and P. T. Krein, “Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles,” IEEE Transactions on Power Electronics, vol. 28, no. 5, pp. 2151–2169, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Dieckerhoff, S. Bernet, and D. Krug, “Power loss-oriented evaluation of high voltage IGBTs and multilevel converters in transformerless traction applications,” IEEE Transactions on Power Electronics, vol. 20, no. 6, pp. 1328–1336, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. K. L. Butler, M. Ehsani, and P. Kamath, “A matlab-based modeling and simulation package for electric and hybrid electric vehicle design,” IEEE Transactions on Vehicular Technology, vol. 48, no. 6, pp. 1770–1778, 1999. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Haghbin and M. Alakula, “Electrical apparatus comprising drive system and electrical machine with reconnectable stator winding,” International Patent WO/2011/159241, 2011.
  6. A. G. Cocconi, “Combined motor drive and battery recharge system,” US Patent 5 341 075, 1994.
  7. AC Propulsion, “AC propulsion EV drive system specifications,” Technical Note, AC Propulsion, San Dimas, Calif, USA, 2008. View at Google Scholar
  8. W. E. Rippel, “Integrated traction inverter and battery charger apparatus,” US Patent 4 920 475, 1990.
  9. W. E. Rippel and A. G. Cocconi, “Integrated motor drive and recharge system,” US Patent 5 099 186, 1992.
  10. L. De-Sousa and B. Bouchez, “Combined electric device for powering and charging,” International Patent WO 2010/057892 A1, 2010.
  11. L. De-Sousa and B. Bouchez, “Method and electric combined device for powering and charging with compensation means,” Article ID 057893, International Patent WO 2010/057893 A1, 2010.
  12. S. Haghbin, M. Alakula, K. Khan et al., “An integrated charger for plug-in hybrid electric vehicles based on a special interior permanent magnet motor,” in Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC '10), pp. 1–6, IEEE, Lille, France, September 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Lacroix, E. Laboure, and M. Hilairet, “An integrated fast battery charger for electric vehicle,” in Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC '10), Lille, France, September 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. D.-G. Woo, G.-Y. Choe, J.-S. Kim, B.-K. Lee, J. Hur, and G.-B. Kang, “Comparison of integrated battery chargers for plug-in hybrid electric vehicles: topology and control,” in Proceedings of the IEEE International Electric Machines and Drives Conference, pp. 1294–1299, IEEE, Niagara Falls, Canada, May 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. L. De Sousa, B. Silvestre, and B. Bouchez, “A combined multiphase electric drive and fast battery charger for electric vehicles,” in Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC '10), pp. 1–6, Lille, France, September 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Pellegrino, E. Armando, and P. Guglielmi, “An integral battery charger with power factor correction for electric scooter,” IEEE Transactions on Power Electronics, vol. 25, no. 3, pp. 751–759, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Li, K. Zhang, H. Zhao, S. F. Fan, and J. Xiong, “Active power decoupling for high-power single-phase PWM rectifiers,” IEEE Transactions on Power Electronics, vol. 28, no. 3, pp. 1308–1319, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Hayashi, K. Takao, T. Shimizu, and H. Ohashi, “High power density design methodology,” in Proceedings of the Power Conversion Conference—Nagoya (PCC '07), pp. 569–574, IEEE, Nagoya, Japan, April 2007. View at Publisher · View at Google Scholar
  19. I. Laird, X. Yuan, and N. McNeill, “A holistic approach to optimise the power density of a silicon carbide (SiC) MOSFET based three-phase inverter,” in Proceedings of the IEEE 11th International Conference on Power Electronics and Drive Systems (PEDS '15), pp. 473–478, Sydney, Australia, June 2015. View at Publisher · View at Google Scholar
  20. M. Yilmaz and P. T. Krein, “Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles,” IEEE Transactions on Power Electronics, vol. 28, no. 5, pp. 2151–2169, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Hu, X. Song, W. Cao, and B. Ji, “New SR drive with integrated charging capacity for plug-in hybrid electric vehicles (PHEVs),” IEEE Transactions on Industrial Electronics, vol. 61, no. 10, pp. 5722–5731, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Hu, C. Gan, W. Cao, C. Li, and S. J. Finney, “Split converter-fed SRM drive for flexible charging in EV/HEV applications,” IEEE Transactions on Industrial Electronics, vol. 62, no. 10, pp. 6085–6095, 2015. View at Publisher · View at Google Scholar
  23. A. Y. Saber and G. K. Venayagamoorthy, “One million plug-in electric vehicles on the road by 2015,” in Proceedings of the 12th International IEEE Conference on Intelligent Transportation Systems (ITSC '09), pp. 141–147, IEEE, St. Louis, Mo, USA, October 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Shimizu, Y. Jin, and G. Kimura, “DC ripple current reduction on a single-phase PWM voltage-source rectifier,” IEEE Transactions on Industry Applications, vol. 36, no. 5, pp. 1419–1429, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. X. Yuan and A. Lovett, “DC-link capacitance reduction in a high power medium voltage modular wind power converter,” in Proceedings of the 15th European Conference on Power Electronics and Applications (EPE '13), pp. 1–10, Lille, France, September 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. R. Wang, F. Wang, D. Boroyevich et al., “A high power density single-phase PWM rectifier with active ripple energy storage,” IEEE Transactions on Power Electronics, vol. 26, no. 5, pp. 1430–1443, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Li, K. Zhang, H. Zhao, S. Fan, and J. Xiong, “Active power decoupling for high-power single-phase PWM rectifiers,” IEEE Transactions on Power Electronics, vol. 28, no. 3, pp. 1308–1319, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. W. Qi, H. Wang, X. Tan, G. Wang, and K. D. T. Ngo, “A novel active power decoupling single-phase PWM rectifier topology,” in Proceedings of the 29th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '14), pp. 89–95, IEEE, Fort Worth, Tex, USA, March 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. X. Yuan, “Analytical averaged loss model of a three-level T-type converter,” in Proceedings of the 7th IET International Conference on Power Electronics, Machines and Drives, pp. 1–6, April 2014. View at Scopus
  30. J. Liu and K. L. Wong, Performance Evaluation of Hard-Switching Interleaved DC/DC Boost Converter with New Generation Silicon Carbide MOSFETs, Cree, Durham, NC, USA.
  31. B. Callanan, “Application considerations for silicon carbide MOSFETs,” Application Considerations for SiC MOSFET, January 2011.
  32. R. J. Callanan, A. Agarwal, A. Burk et al., “Recent progress in SiC DMOSFETs and JBS diodes at Cree,” in Proceedings of the 34th Annual Conference of IEEE Industrial Electronics (IECON '08), pp. 2885–2890, IEEE, Orlando, Fla, USA, November 2008. View at Publisher · View at Google Scholar
  33. K. Ma, M. Liserre, and F. Blaabjerg, “Lifetime estimation for the power semiconductors considering mission profiles in wind power converter,” in Proceedings of the 5th Annual IEEE Energy Conversion Congress and Exhibition (ECCE '13), pp. 2962–2971, Denver, Colo, USA, September 2013. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Lemmens, P. Vanassche, and J. Driesen, “Optimal control of traction motor drives under electrothermal constraints,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 2, no. 2, pp. 249–263, 2014. View at Publisher · View at Google Scholar
  35. X. Yuan and A. Lovett, “DC-link capacitance reduction in a high power medium voltage modular wind power converter,” in Proceedings of the 15th European Conference on Power Electronics and Applications (EPE '13), pp. 1–10, IEEE, Lille, France, September 2013. View at Publisher · View at Google Scholar · View at Scopus
  36. http://www.farnell.com/datasheets/1821845.pdf.
  37. SAE Electric Vehicle and Plug-in Hybrid Electric Vehicle Conductive Charge Coupler, SAE standard J1772, January 2010.