Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 918301, 13 pages
http://dx.doi.org/10.1155/2015/918301
Research Article

An Optimization-Based Impedance Approach for Robot Force Regulation with Prescribed Force Limits

1Facultad de Ingeniería, Universidad Veracruzana, Boulevard Adolfo Ruiz Cortines S/N, Costa Verde, 94294 Boca del Río, VER, Mexico
2Centro de Investigación y de Estudios Avanzados del IPN, Unidad Zacatenco, Departamento de Ingeniería Eléctrica, Sección de Mecatrónica, Avenida Instituto Politécnico Nacional No. 2508, 07360 San Pedro Zacatenco, México, DF, Mexico

Received 31 October 2014; Accepted 6 January 2015

Academic Editor: Luis Rodolfo Garcia Carrillo

Copyright © 2015 R. de J. Portillo-Vélez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. Garcia, M. A. Jimenez, P. G. de Santos, and M. Armada, “The evolution of robotics research,” IEEE Robotics and Automation Magazine, vol. 14, no. 1, pp. 90–103, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. R. A. Beasley, “Medical robots: current systems and research directions,” Journal of Robotics, vol. 2012, Article ID 401613, 14 pages, 2012. View at Publisher · View at Google Scholar
  3. Y. Xie, D. Sun, C. Liu, H. Y. Tse, and S. H. Cheng, “A force control approach to a robot-assisted cell microinjection system,” The International Journal of Robotics Research, vol. 29, no. 9, pp. 1222–1232, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Guo, H. Suzuki, S.-Y. Morita, Y. Yamagata, and T. Higuchi, “A real-time polishing force control system for ultraprecision finishing of micro-optics,” Precision Engineering, vol. 37, no. 4, pp. 787–792, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Zeng and A. Hemami, “An overview of robot force control,” Robotica, vol. 15, no. 5, pp. 473–482, 1997. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Lefebvre, J. Xiao, H. Bruyninckx, and G. de Gersem, “Active compliant motion: a survey,” Advanced Robotics, vol. 19, no. 5, pp. 479–499, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Caccavale, C. Natale, B. Siciliano, and L. Villani, “Integration for the next generation: embedding force control into industrial robots,” IEEE Robotics and Automation Magazine, vol. 12, no. 3, pp. 53–64, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. O. Kermorgant and F. Chaumette, “Dealing with constraints in sensor-based robot control,” IEEE Transactions on Robotics, vol. 30, no. 1, pp. 244–257, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. N. Lauzier, M. Grenier, and C. Gosselin, “2 DOF cartesian force limiting device for safe physical human-robot interaction,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '09), pp. 253–258, IEEE, Kobe, Japan, May 2009. View at Publisher · View at Google Scholar
  10. N. Lauzier and C. Gosselin, “3-DOF cartesian force limiting device based on the delta architecture for safe physical human-robot interaction,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '10), pp. 3420–3425, Anchorage, Alaska, USA, May 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. H.-S. Kim, J.-J. Park, J.-B. Song, and J.-H. Kyung, “Design of safety mechanism for an industrial manipulator based on passive compliance,” Journal of Mechanical Science and Technology, vol. 24, no. 11, pp. 2307–2313, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. J. W. Hurst, J. E. Chestnutt, and A. A. Rizzi, “The actuator with mechanically adjustable series compliance,” IEEE Transactions on Robotics, vol. 26, no. 4, pp. 597–606, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. N. Lauzier and C. Gosselin, “Series clutch actuators for safe physical human-robot interaction,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '11), pp. 5401–5406, IEEE, Shanghai, China, May 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. U. S. Park, Y. Yamada, and Y. Nakabo, “Force control with safety constraints via iterative feedback tuning,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '09), pp. 3670–3675, Kobe, Japan, May 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Bhasin, P. M. Patre, Z. Kan, and W. E. Dixon, “Control of a robot interacting with an uncertain viscoelastic environment with adjustable force bounds,” in Proceedings of the American Control Conference (ACC '10), pp. 5242–5247, Baltimore, Md, USA, July 2010. View at Scopus
  16. C.-H. Liang, S. Bhasin, K. Dupree, and W. E. Dixon, “A force limiting adaptive controller for a robotic system undergoing a noncontact-to-contact transition,” IEEE Transactions on Control Systems Technology, vol. 17, no. 6, pp. 1330–1341, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Palankar and L. Palmer, “A force threshold-based position controller for legged locomotion,” Autonomous Robots, 2014. View at Publisher · View at Google Scholar
  18. A. Rodríguez-Angeles, R. Portillo-Vélez, and C. Cruz-Villar, “An optimal admittance reactive force control for cooperative robot grasping tasks,” in Proceedings of the 8th International Conference on Informatics in Control Automation and Robotics (ICINCO '11), pp. 50–58, Noordwijkerhout, The Netherlands, 2011.
  19. D. A. Lawrence, “Impedance control stability properties in common implementations,” in Proceedings of the IEEE International Conference on Robotics and Automation, vol. 2, pp. 1185–1190, 1988. View at Scopus
  20. H. Seraji and R. Colbaugh, “Force tracking in impedance control,” The International Journal of Robotics Research, vol. 16, no. 1, pp. 97–117, 1997. View at Publisher · View at Google Scholar · View at Scopus
  21. M. S. Bazaraa, H. D. Sherali, and C. M. Shetty, Nonlinear Programming: Theory and Algorithms, John Wiley & Sons, New York, NY, USA, 2006. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  22. U. Helmke and J. B. Moore, Optimization and Dynamical Systems, Springer, London, UK, 1996. View at MathSciNet
  23. F. Jen, M. Shoham, and R. W. Longman, “Liapunov stability of force-controlled grasps with a multi-fingered hand,” International Journal of Robotics Research, vol. 15, no. 2, pp. 137–154, 1996. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Colbaugh and K. Glass, “Adaptive compliant motion control of manipulators without velocity measurements,” Journal of Robotic Systems, vol. 14, no. 7, pp. 513–527, 1997. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Seraji, “Nonlinear and adaptive control of force and compliance in manipulators,” The International Journal of Robotics Research, vol. 17, no. 5, pp. 467–484, 1998. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Jung, T. C. Hsia, and R. G. Bonitz, “Force tracking impedance control for robot manipulators with an unknown environment: theory, simulation, and experiment,” The International Journal of Robotics Research, vol. 20, no. 9, pp. 765–774, 2001. View at Publisher · View at Google Scholar · View at Scopus
  27. K. P. Tee, S. S. Ge, and E. H. Tay, “Barrier Lyapunov functions for the control of output-constrained nonlinear systems,” Automatica, vol. 45, no. 4, pp. 918–927, 2009. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  28. T. A. Lasky and T. C. Hsia, “On force-tracking impedance control of robot manipulators,” in Proceedings of the IEEE International Conference on Robotics and Automation, vol. 1, pp. 274–280, Sacramento, Calif, USA, April 1991. View at Publisher · View at Google Scholar
  29. S. Chiaverini and L. Sciavicco, “Parallel approach to force/position control of robotic manipulators,” IEEE Transactions on Robotics and Automation, vol. 9, no. 4, pp. 361–373, 1993. View at Publisher · View at Google Scholar · View at Scopus
  30. P. Fungtammasan and T. Watanabe, “Grasp input optimization taking contact position and object information uncertainties into consideration,” IEEE Transactions on Robotics, vol. 28, no. 5, pp. 1170–1177, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. I. Cervantes and J. Alvarez-Ramirez, “On the PID tracking control of robot manipulators,” Systems and Control Letters, vol. 42, no. 1, pp. 37–46, 2001. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Sayler and R. Dillmann, “Experience-based optimization of universal manipulation strategies for industrial assembly tasks,” Robotics and Autonomous Systems, vol. 59, no. 11, pp. 882–898, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Sahabani, S. El-Koury, and P. Bidaud, “An overview of 3D object grasp synthesis algorithms,” Robotics and Autonomous Systems, vol. 60, no. 3, pp. 326–336, 2012. View at Publisher · View at Google Scholar
  34. B. Barkat, S. Zeghloul, and J. P. Gazeau, “Optimization of grasping forces in handling of brittle objects,” Robotics and Autonomous Systems, vol. 57, no. 4, pp. 460–468, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. Y. Zheng and W.-H. Qian, “Dynamic force distribution in multifingered grasping by decomposition and positive combination,” IEEE Transactions on Robotics, vol. 21, no. 4, pp. 718–726, 2005. View at Publisher · View at Google Scholar · View at Scopus
  36. J. Szewczyk, F. Plumet, and P. Bidaud, “Planning and controlling cooperating robots through distributed impedance,” Journal of Robotic Systems, vol. 19, no. 6, pp. 283–297, 2002. View at Publisher · View at Google Scholar · View at Scopus
  37. L. L. Swanstrom, R. Kozarek, P. J. Pasricha et al., “Development of a new access device for transgastric surgery,” Journal of Gastrointestinal Surgery, vol. 9, no. 8, pp. 1129–1137, 2005. View at Publisher · View at Google Scholar · View at Scopus
  38. T. Aljaafreh, “Controlling force variations during soft-tissue grasping,” Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 223, no. 6, pp. 749–753, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. T. Takahashi, T. Tsuboi, T. Kishida et al., “Adaptive grasping by multi fingered hand with tactile sensor based on robust force and position control,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '08), pp. 264–271, May 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. M. Ohka, N. Morisawa, and H. B. Yussof, “Trajectory generation of robotic fingers based on tri-axial tactile data for cap screwing task,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '09), pp. 883–888, May 2009. View at Publisher · View at Google Scholar · View at Scopus
  41. T. Yoshikawa, “Multifingered robot hands: control for grasping and manipulation,” Annual Reviews in Control, vol. 34, no. 2, pp. 199–208, 2010. View at Publisher · View at Google Scholar · View at Scopus
  42. G. Carbone, S. Iannone, and M. Ceccarelli, “Regulation and control of LARM Hand III,” Robotics and Computer-Integrated Manufacturing, vol. 26, no. 2, pp. 202–211, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. R. M. Murray, Z. Li, and S. S. Sastry, A Mathematical Introduction to Robotic Manipulation, CRC Press, Boca Raton, Fla, USA, 1994. View at MathSciNet
  44. D. L. Bowers and R. Lumia, “Manipulation of unmodeled objects using intelligent grasping schemes,” IEEE Transactions on Fuzzy Systems, vol. 11, no. 3, pp. 320–330, 2003. View at Publisher · View at Google Scholar · View at Scopus
  45. C. C. Cheah, S. P. Hou, Y. Zhao, and J.-J. E. Slotine, “Adaptive vision and force tracking control for robots with constraint uncertainty,” IEEE/ASME Transactions on Mechatronics, vol. 15, no. 3, pp. 389–399, 2010. View at Publisher · View at Google Scholar