Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2015, Article ID 940643, 8 pages
http://dx.doi.org/10.1155/2015/940643
Research Article

An Improved Method for Generating Cutter Points Based on Required Form Accuracy of the Machining Surface

School of Mechanical Science and Engineering, Jilin University, Changchun 130025, China

Received 21 October 2014; Revised 24 March 2015; Accepted 30 March 2015

Academic Editor: María I. Herreros

Copyright © 2015 Shijun Ji et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Shijun Ji, Huijuan Yu, and Ji Zhao, “An Improved Method for Generating Cutter Points Based on Required Form Accuracy of the Machining Surface,” Mathematical Problems in Engineering, vol. 2015, Article ID 940643, 8 pages, 2015. https://doi.org/10.1155/2015/940643.