Research Article
Multiobjective Design of Turbo Injection Mode for Axial Flux Motor in Plastic Injection Molding Machine by Particle Swarm Optimization
Table 2
Experimental combination table.
| Experiment | Wire dimension | Stator winding type | Air-gap | Noise 1 Insulation layer thickness | Noise 2 Stator temperature |
| 1 | −1 | −1 | −1 | −1 | 1 | 2 | 1 | −1 | −1 | −1 | −1 | 3 | −1 | 1 | −1 | −1 | −1 | 4 | 1 | 1 | −1 | −1 | 1 | 5 | −1 | −1 | 1 | −1 | −1 | 6 | 1 | −1 | 1 | −1 | 1 | 7 | −1 | 1 | 1 | −1 | 1 | 8 | 1 | 1 | 1 | −1 | −1 | 9 | −1 | −1 | −1 | 1 | −1 | 10 | 1 | −1 | −1 | 1 | 1 | 11 | −1 | 1 | −1 | 1 | 1 | 12 | 1 | 1 | −1 | 1 | −1 | 13 | −1 | −1 | 1 | 1 | 1 | 14 | 1 | −1 | 1 | 1 | −1 | 15 | −1 | 1 | 1 | 1 | −1 | 16 | 1 | 1 | 1 | 1 | 1 |
|
|