Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016 (2016), Article ID 1254037, 9 pages
http://dx.doi.org/10.1155/2016/1254037
Research Article

Research on the Fatigue Life Prediction Method of Thrust Rod

1State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130025, China
2Aircraft Control Department, Aviation University Air Force, Changchun 130022, China
3School of Automotive Engineering, Shandong Jiaotong University, Jinan 250023, China
4China FAW Group Corporation R&D Center, Changchun 130011, China
5Changchun Chengyuan Auto Parts Limited Company, Changchun 130114, China

Received 20 June 2016; Accepted 22 September 2016

Academic Editor: Mitsuhiro Okayasu

Copyright © 2016 Guoyu Feng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Shi, J. Ke, Q. Wang et al., “Limit load analysis and spherical hinge structure optimization for V-type thrust rod,” Journal of Xi'an Jiaotong University, vol. 47, no. 10, pp. 132–136, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Hu and J. Song, “Design and check of thrust bar in heavy truck,” Special Purpose Vehicle, vol. 2, pp. 78–79, 2012. View at Google Scholar
  3. Z. Changjiang and T. Zhigang, “Optimization design and analysis of commercial vehicle thrust rod,” Tech. Rep. SAE-C2010P105(2010)17-23, 2010. View at Google Scholar
  4. J. U. Gang, “Design match of thrust rod in heavy engineering truck,” Specia Purpose Vehicile, vol. 2, pp. 74–77, 2012. View at Google Scholar
  5. D. G. Thomas and M. K. Steven, “Characterizing the road-damaging dynamics of truck tandem suspensions,” SAE Technical Paper 2009-01-1221, 2009. View at Google Scholar
  6. W. Ma, S. Luo, and R. Song, “Abnormal vertical dynamic performance of subway vehicles,” Chinese Journal of Mechanical Engineering (English Edition), vol. 23, no. 2, pp. 174–179, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. P. Sindgikar, N. Jadhav, and K. Gopalakrishna, “Design of cabin suspension characteristics of heavy commercial vehicle,” SAE Technical Paper 2008-01-0265, 2008. View at Publisher · View at Google Scholar
  8. J. Li, Z. Zhe, Y. Zhu, and Z. Jie, “Modeling and simulation of the guide rod tandem suspension model,” in Proceedings of the International Conference on Electric Information and Control Engineering (ICEICE '11), vol. 1109, pp. 5102–5106, April 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. W. Chen, X. Li, X. Chen, and L. Wang, “Middle-high frequency vibration transfer analysis of vehicle suspension and optimization of rubber bushings,” Transactions of the Chinese Society for Agricultural Machinery, vol. 42, no. 10, pp. 25–29, 2011. View at Google Scholar · View at Scopus
  10. F. Guosheng, J. Sumei, and Z. Mingjun, “Crack analysis of thrust bar for 55 t heavy dump truck equalizing suspension,” Journal of Shijiazhuang Tiedao University(Natural Science), vol. 26, no. 4, pp. 43–46, 2013. View at Google Scholar
  11. Y. Wang, H. Bai, and J. Hou, “Fatigue damage performance of metal rubber material,” Journal of Mechanical Engineering, vol. 47, no. 2, pp. 65–71, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Wang, S. Hao, and C. Li, “Force analysis on traction bar of heavy truck rear suspension based on road load spectrum,” Automobile Technology, no. 8, pp. 31–33, 2013. View at Google Scholar
  13. Y. Hou, “Structure analysis of suspension system V-type rod,” Bus & Coach Technology and Research, vol. 4, pp. 20–22, 2007. View at Google Scholar
  14. J. Zhang, J. Li, Y. Deng, Y. Huang, and Y. Zhang, “Strength design of thrust bar for 40 t heavy-duty vehicle equalizing suspension,” Automobile Technology, no. 3, pp. 19–22, 2008. View at Google Scholar
  15. X. Wang, W. Shangguan, T. Liu et al., “Experiment of uniaxial tension fatigue and modeling of fatigue life for filled natural rubbers,” Journal of Mechanical Engineering, vol. 49, no. 14, pp. 66–73, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. W. V. Mars and A. Fatemi, “Fatigue crack nucleation and growth in filled natural rubber,” Fatigue & Fracture of Engineering Materials and Structures, vol. 26, no. 9, pp. 779–789, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. W. Qian, Structure Optimization and Durability Research of Heavy Commercial Vehicle Thrust Rod, Jilin University, Changchun, China, 2013.
  18. W. Wang, W. Shangguan, X. Duan, and B. Yao, “Study on prediction of fatigue life of rubber mount based on linear cumulative fatigue damage theory,” Journal of Mechanical Engineering, vol. 48, no. 10, pp. 56–65, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. C.-B. Zhang, “Description of the axial composite rubber ball joint structure with small radial/axial stiffness ratio,” Rolling Stock, vol. 48, no. 3, pp. 20–23, 2010. View at Google Scholar
  20. H. Y. Sun, W. S. Feng, Y. J. Huang, J. G. Rong, and J. X. Liu, “Research on loading characteristics of traction rubber bushing used in high-speed vehicle,” Railway Locomotive & Car, vol. 32, no. 2, pp. 46–48, 2012. View at Google Scholar
  21. H. Zhang, K. Chen, and J. Zhang, “Static & dynamis Analysis of V-type,” Propelling Rod in Air Suspensnn System,Tractor & Faun Transporter, vol. 36, no. 3, pp. 40–42, 2009. View at Google Scholar
  22. W. V. Mars and A. Fatemi, “Fatigue crack nucleation and growth in filled natural rubber,” Fatigue and Fracture of Engineering Materials and Structures, vol. 26, no. 9, pp. 779–789, 2003. View at Publisher · View at Google Scholar · View at Scopus
  23. C.-S. Woo, W.-D. Kim, and J.-D. Kwon, “A study on the material properties and fatigue life prediction of natural rubber component,” Materials Science and Engineering A, vol. 483, no. 1-2, pp. 376–381, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. N. Moës, J. Dolbow, and T. Belytschko, “A finite element method for crack growth without remeshing,” International Journal for Numerical Methods in Engineering, vol. 46, no. 1, pp. 131–150, 1999. View at Publisher · View at Google Scholar · View at Scopus
  25. G. Chen and L. Chen, “Solution-dependent path crack propagation simulation and its application,” Pressure Vessel Technology, vol. 29, no. 10, pp. 36–40, 2012. View at Google Scholar
  26. J. Lemaitre and J. L. Chaboche, Mechanics of Solid Materials, Cambridge University Press, Cambridge, UK, 1994.
  27. R. K. Luo, P. W. Cook, and W. X. Wu, “Fatigue design of rubber springs used in rail vehicle suspensions,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 217, no. 3, pp. 237–240, 2003. View at Publisher · View at Google Scholar
  28. Z.-P. Ding, R.-H. Yang, Y.-J. Huang, and J.-L. Bu, “Analysis on the stiffness and fatigue life of variable stiffness rubber bushing,” Journal of Vibration and Shock, vol. 33, no. 2, pp. 99–104, 2014. View at Google Scholar · View at Scopus
  29. W. D. Kim, H. J. Lee, J. Y. Kim, and S.-K. Koh, “Fatigue life estimation of an engine rubber mount,” International Journal of Fatigue, vol. 26, no. 5, pp. 553–560, 2004. View at Publisher · View at Google Scholar · View at Scopus
  30. R. W. Ogden, “Large deformation isotropic elasticity: on the correlation of theory and experiment for incompressible rubberlike solids,” Proceedings of the Royal Society of London A: Mathematical A, vol. 326, no. 1567, pp. 565–584, 1972. View at Publisher · View at Google Scholar
  31. G. Ayoub, M. Naït-Abdelaziz, F. Zaïri, J. M. Gloaguen, and P. Charrier, “Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: effects of two-blocks loading and R ratio,” Mechanics of Materials, vol. 52, no. 3, pp. 87–102, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Ali, M. Hosseini, and B. Sahari, “Continuum damage mechanics modeling for fatigue life of elastomeric materials,” International Journal of Structural Integrity, vol. 1, no. 1, pp. 63–72, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Bonet and R. D. Wood, Nonlinear Continuum Mechanics for Finite Element Analysis, Cambridge University Press, Cambridge, UK, 1997. View at MathSciNet
  34. N. Saintier, G. Cailletaud, and R. Piques, “Multiaxial fatigue life prediction for a natural rubber,” International Journal of Fatigue, vol. 28, no. 5-6, pp. 530–539, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus