Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 2171547, 14 pages
http://dx.doi.org/10.1155/2016/2171547
Research Article

Comparison of Three Analytical Methods for the Precise Calculation of Cogging Torque and Torque Ripple in Axial Flux PM Machines

Department of EESA, Electrical Energy Laboratory, Ghent University, Technologiepark-Zwijnaarde 913, 9052 Ghent, Belgium

Received 20 June 2016; Revised 14 September 2016; Accepted 28 September 2016

Academic Editor: Dane Quinn

Copyright © 2016 Ahmed Hemeida et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ahmed Hemeida, Bert Hannon, Hendrik Vansompel, and Peter Sergeant, “Comparison of Three Analytical Methods for the Precise Calculation of Cogging Torque and Torque Ripple in Axial Flux PM Machines,” Mathematical Problems in Engineering, vol. 2016, Article ID 2171547, 14 pages, 2016. https://doi.org/10.1155/2016/2171547.