Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 3734258, 13 pages
http://dx.doi.org/10.1155/2016/3734258
Research Article

Novel Damage Detection Techniques for Structural Health Monitoring Using a Hybrid Sensor

School of Reliability and Systems Engineering, Beihang University, 37 Xueyuan Road, Haidian District, Beijing 100191, China

Received 19 February 2016; Revised 30 March 2016; Accepted 4 April 2016

Academic Editor: Wenyu Zhao

Copyright © 2016 Dengjiang Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Sposito, C. Ward, P. Cawley, P. B. Nagy, and C. Scruby, “A review of non-destructive techniques for the detection of creep damage in power plant steels,” NDT & E International, vol. 43, no. 7, pp. 555–567, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. R. S. Geng, “Modern acoustic emission technique and its application in aviation industry,” Ultrasonics, vol. 44, pp. e1025–e1029, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. B. W. Drinkwater and P. D. Wilcox, “Ultrasonic arrays for non-destructive evaluation: a review,” NDT & E International, vol. 39, no. 7, pp. 525–541, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Segebade, “Nondestructive materials testing—overview and evaluation,” in Proceedings of the Annual Meeting on Nondestructive Materials Testing, vol. 63, p. 617, 1997.
  5. M. P. Papaelias, C. Roberts, and C. L. Davis, “A review on non-destructive evaluation of rails: state-of-the-art and future development,” Proceedings of the Institution of Mechanical Engineers, Part F, vol. 222, no. 4, pp. 367–384, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. H. E. Boyer and T. L. Gall, Metals Handbook, Desk Edition, 2nd edition, 1985.
  7. L. Y. Yu and V. Giurgiutiu, “In-situ optimized PWAS phased arrays for lamb wave structural health monitoring,” Journal of Mechanics of Materials and Structures, vol. 2, no. 3, pp. 459–487, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Majumder, T. K. Gangopadhyay, A. K. Chakraborty, K. Dasgupta, and D. K. Bhattacharya, “Fibre Bragg gratings in structural health monitoring-present status and applications,” Sensors and Actuators A: Physical, vol. 147, no. 1, pp. 150–164, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Z. Zhang, Y. J. Yan, and Z. Y. Wu, “Electric potential detection for structural surface crack using coating sensors,” Sensors and Actuators, A: Physical, vol. 137, no. 2, pp. 223–229, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Sun and M. B. Liu, “Analysis of the crack penetration/deflection at the interfaces in the intelligent coating system utilizing virtual crack closure technique,” Engineering Fracture Mechanics, vol. 133, pp. 152–162, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. Feng, L. Zhou, and Z. Li, “Damage detection for plate-like structure using matching pursuits with chirplet atom,” in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 7981 of Proceedings of SPIE, pp. 1–12, 2011. View at Publisher · View at Google Scholar
  12. D. A. Saravanos and P. R. Heyliger, “Coupled layerwise analysis of composite beams with embedded piezoelectric sensors and actuators,” Journal of Intelligent Material Systems and Structures, vol. 6, no. 3, pp. 350–363, 1995. View at Publisher · View at Google Scholar · View at Scopus
  13. H.-N. Li, D.-S. Li, and G.-B. Song, “Recent applications of fiber optic sensors to health monitoring in civil engineering,” Engineering Structures, vol. 26, no. 11, pp. 1647–1657, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. C. Grosse, G. Mclaskey, S. Bachmaier, S. D. Glaser, M. Krüger, and C. Grosse, “A hybrid wireless sensor network for acoustic emission testing in SHM,” in Proceedings of the SPIE Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 2008. View at Publisher · View at Google Scholar
  15. M. P. Blodgett and P. B. Nagy, “Eddy current assessment of near-surface residual stress in shot-peened nickel-base superalloys,” Journal of Nondestructive Evaluation, vol. 23, no. 3, pp. 107–123, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Habibalahi, M. S. Safizadeh, A. Habibalahi, and M. S. Safizadeh, “Pulsed eddy current and ultrasonic data fusion applied to stress measurement,” Measurement Science & Technology, vol. 25, pp. 1009–1016, 2014. View at Google Scholar
  17. M. L. Lobanov, I. P. Sysolyatina, V. K. Chistyakov et al., “On possibility of nondestructive testing of the grain size in the intermediate stages of manufacturing electrical steel,” Russian Journal of Nondestructive Testing, vol. 39, no. 8, pp. 615–628, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. T. Ogisu, M. Shimanuki, S. Kiyoshima, Y. Okabe, and N. Takeda, “Development of damage monitoring system for aircraft structure using a PZT actuator/FBG sensor hybrid system,” in Smart Structures and Materials 2004: Industrial and Commercial Applications of Smart Structures Technologies, vol. 5388 of Proceedings of SPIE, pp. 425–436, July 2004. View at Publisher · View at Google Scholar
  19. X. Qing, A. Kumar, C. Zhang, I. F. Gonzalez, G. Guo, and F.-K. Chang, “A hybrid piezoelectric/fiber optic diagnostic system for structural health monitoring,” Smart Materials and Structures, vol. 14, no. 3, pp. S98–S103, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. Lü and M. Liu, “China Patent,” No. 200610104559.4.
  21. F. Hu, M. Liu, G. Hong, and Z. Lü, “Flaw-detected coating sensors applied in aircraft R&M,” in Proceedings of the Annual Reliability and Maintainability Symposium (RAMS '09), pp. 95–99, Fort Worth, Tex, USA, January 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. S. S. Kessler, S. M. Spearing, and C. Soutis, “Damage detection in composite materials using Lamb wave methods,” Smart Materials & Structures, vol. 11, no. 2, pp. 269–278, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. Z. Su, L. Ye, and Y. Lu, “Guided Lamb waves for identification of damage in composite structures: a review,” Journal of Sound and Vibration, vol. 295, no. 3–5, pp. 753–780, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. J.-B. Ihn and F.-K. Chang, “Pitch-catch active sensing methods in structural health monitoring for aircraft structures,” Structural Health Monitoring, vol. 7, no. 1, pp. 5–19, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. Feng, J. Yang, and W. Chen, “Delamination detection in composite beams using a transient wave analysis method,” Journal of Vibroengineering, vol. 15, no. 1, pp. 139–151, 2013. View at Google Scholar · View at Scopus
  26. L. Zhou, Z. He, and H. Sun, “Lamb wave mode conversion-based crack detection for plate-like structures without baseline information,” Journal of Vibroengineering, vol. 15, no. 2, pp. 647–657, 2013. View at Google Scholar · View at Scopus
  27. S. Grondel, C. Delebarre, J. Assaad, J.-P. Dupuis, and L. Reithler, “Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques,” NDT & E International, vol. 35, no. 3, pp. 137–146, 2002. View at Publisher · View at Google Scholar · View at Scopus
  28. K. S. Ho, D. R. Billson, and D. A. Hutchins, “Ultrasonic Lamb wave tomography using scanned EMATs and wavelet processing,” Nondestructive Testing and Evaluation, vol. 22, no. 1, pp. 19–34, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. X. Chen, Y. Gao, and L. Bao, “Lamb wave signal retrieval by wavelet ridge,” Journal of Vibroengineering, vol. 16, no. 1, pp. 464–476, 2014. View at Google Scholar · View at Scopus
  30. A. Vilpišauskas and R. Kažys, “Investigation of air-coupled generation of asymmetric Lamb waves using rectangular phased arrays,” Journal of Vibroengineering, vol. 16, no. 3, pp. 1397–1404, 2014. View at Google Scholar · View at Scopus
  31. V. Giurgiutiu, “Tuned Lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring,” Journal of Intelligent Material Systems and Structures, vol. 16, no. 4, pp. 291–305, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. Z. Chang and A. Mal, “Scattering of Lamb waves from a rivet hole with edge cracks,” Mechanics of Materials, vol. 31, no. 3, pp. 197–204, 1999. View at Publisher · View at Google Scholar · View at Scopus
  33. S. S. Kessler, S. M. Spearing, and C. Soutis, “Structural health monitoring in composite materials using Lamb wave methods,” in Proceedings of the 16th Technical Conference of the American Society for Composites, September 2001.
  34. D. N. Alleyne and P. Cawley, “The interaction of Lamb waves with defects,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 39, pp. 381–397, 1992. View at Google Scholar · View at Scopus
  35. C. Wang and F. Chang, “Built-in diagnostics for impact damage identification of composite structures,” in Proceedings of the 2nd International Workshop on Structural Health Monitoring, pp. 8–10, Stanford, Calif, USA, September 1999.
  36. J. He, X. Guan, T. Peng et al., “A multi-feature integration method for fatigue crack detection and crack length estimation in riveted lap joints using Lamb waves,” Smart Materials and Structures, vol. 22, no. 10, Article ID 105007, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. K. Simola and U. Pulkkinen, “Models for non-destructive inspection data,” Reliability Engineering & System Safety, vol. 60, no. 1, pp. 1–12, 1998. View at Publisher · View at Google Scholar · View at Scopus
  38. M. J. S. Lowe, R. E. Challis, and C. W. Chan, “The transmission of Lamb waves across adhesively bonded lap joints,” The Journal of the Acoustical Society of America, vol. 107, no. 3, pp. 1333–1345, 2000. View at Publisher · View at Google Scholar · View at Scopus
  39. G. A. Georgiou, Probability of Detection (PoD) Curves, Jacobi Consulting, London, UK, 2006.
  40. C. Harding and G. Hugo, “Statistical analysis of probability of detection hit/miss data for small data sets,” AIP Conference Proceedings, vol. 657, pp. 1838–1845, 2003. View at Publisher · View at Google Scholar
  41. C.-H. Tsai and W.-F. Wu, “Application of probabilistic fracture mechanics to the risk assessment of pressure vessels,” in Transactions of the 12 International Conference on Structural Mechanics in Reactor Technology, vol. 1000, pp. 135–140, 1993. View at Google Scholar
  42. R. Zheng and B. R. Ellingwood, “Role of non-destructive evaluation in time-dependent reliability analysis,” Structural Safety, vol. 20, no. 4, pp. 325–339, 1998. View at Publisher · View at Google Scholar · View at Scopus
  43. A. P. Berens, “NDE reliability data analysis,” in ASM Handbook, vol. 17, pp. 689–701, 1989. View at Google Scholar
  44. C. R. A. Schneider and J. R. Rudlin, “Review of statistical methods used in quantifying NDT reliability,” Insight—Non-Destructive Testing and Condition Monitoring, vol. 46, no. 2, pp. 77–79, 2004. View at Publisher · View at Google Scholar · View at Scopus
  45. X. Guan, J. Zhang, K. Kadau, and S. Zhou, “Probabilistic fatigue life prediction using ultrasonic inspection data considering equivalent initial flaw size uncertainty,” in Review of Progress in Quantative Nondestructive Evaluation, D. O. Thompson and D. E. Chimenti, Eds., vol. 32, pp. 620–627, American Institute of Physics, Melville, NY, USA, 2013. View at Google Scholar
  46. J. H. Kurz, A. Jüngert, S. Dugan, G. Dobmann, and C. Boller, “Reliability considerations of NDT by probability of detection (POD) determination using ultrasound phased array,” Engineering Failure Analysis, vol. 35, pp. 6090–617, 2013. View at Publisher · View at Google Scholar · View at Scopus
  47. X. Guan, J. He, R. Jha, and Y. Liu, “An efficient analytical Bayesian method for reliability and system response updating based on Laplace and inverse first-order reliability computations,” Reliability Engineering & System Safety, vol. 97, no. 1, pp. 1–13, 2012. View at Publisher · View at Google Scholar · View at Scopus
  48. S. L. Huang, Z. Wei, W. Zhao, and S. Wang, “A new omni-directional EMAT for ultrasonic lamb wave tomography imaging of metallic plate defects,” Sensors, vol. 14, no. 2, pp. 3458–3476, 2014. View at Publisher · View at Google Scholar · View at Scopus