Research Article
Optimization Design for Detonation Powerplant Based on LS-DYNA Simulation
Table 1
Four sets of fit clearances, unit: mm.
| | | | | | | | | | | |
| 0.01 | 0.01 | 0.05 | 0.01 | 0.05 | 0.01 | 0.05 | 0.02 | 0.02 | 0.02 | 0.02 | 0.03 | 0.03 | 0.03 | 0.03 | 0.04 | 0.04 | 0.04 | 0.04 | 0.05 | 0.05 | 0.05 | 0.05 | 0.06 | 0.06 | 0.06 | 0.06 | 0.07 | 0.07 | 0.07 | 0.07 | 0.08 | 0.08 | 0.08 | 0.08 | 0.09 | 0.09 | 0.09 | 0.09 | 0.10 | 0.10 | 0.10 | 0.10 |
|
|