Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 5386893, 17 pages
http://dx.doi.org/10.1155/2016/5386893
Research Article

Multiresponse Optimization of a Compliant Guiding Mechanism Using Hybrid Taguchi-Grey Based Fuzzy Logic Approach

1Division of Computational Mechatronics, Institute for Computational Science, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
2Faculty of Electrical & Electronics Engineering, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam

Received 1 November 2015; Revised 4 April 2016; Accepted 12 April 2016

Academic Editor: Chunlin Chen

Copyright © 2016 Thanh-Phong Dao. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. K. Kang, B. Li, P. S. Ho, and R. Huang, “Buckling of single-crystal silicon nanolines under indentation,” Journal of Nanomaterials, vol. 2008, Article ID 132728, 11 pages, 2008. View at Publisher · View at Google Scholar
  2. L. Liu, G. Cao, and X. Chen, “Mechanisms of nanoindentation on multiwalled carbon nanotube and nanotube cluster,” Journal of Nanomaterials, vol. 2008, Article ID 271763, 12 pages, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Gao, G. Dai, J. Zhao, H. Li, L. Xu, and Z. Zhu, “Influence of indentation on the fatigue strength of carbonitrided plain steel,” Advances in Materials Science and Engineering, vol. 2015, Article ID 492693, 9 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Tang, Y. Guo, Z. Jia, Y. Li, and Q. Wei, “Examining the effect of pileup on the accuracy of sharp indentation testing,” Advances in Materials Science and Engineering, vol. 2015, Article ID 528729, 10 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Machaka, T. E. Derry, I. Sigalas, and M. Herrmann, “Analysis of the indentation size effect in the microhardness measurements in B6O,” Advances in Materials Science and Engineering, vol. 2011, Article ID 539252, 6 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. L. C. Hui, J. C. Pei, W. H. Bo, and H. K. Jao, “Young's moduli of human tooth measured using micro-indentation tests,” Life Science Journal, vol. 9, pp. 172–177, 2012. View at Google Scholar
  7. J. Dean, J. Campbell, G. A. Smith, and T. W. Clyne, “Critical assessment of the stable indenter velocity method for obtaining the creep stress exponent from indentation data,” Acta Materialia, vol. 80, pp. 56–66, 2014. View at Publisher · View at Google Scholar
  8. T. H. Zhang, Y. H. Feng, R. Yang, and P. Jiang, “A method to determine fracture toughness using cube-corner indentation,” Scripta Materialia, vol. 62, no. 4, pp. 199–201, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. J. M. Antunes, J. V. Fernandes, L. F. Menezes, and B. M. Chaparro, “A new approach for reverse analyses in depth-sensing indentation using numerical simulation,” Acta Materialia, vol. 55, no. 1, pp. 69–81, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Huang and H. Zhao, “In situ nanoindentation and scratch testing inside scanning electron microscopes: opportunities and challenges,” Science of Advanced Materials, vol. 6, no. 5, pp. 875–889, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Balos, L. Sidjanin, and B. Pilic, “Indentation size effect in autopolymerized and microwave post treated poly(methyl methacrylate) denture reline resins,” Acta Polytechnica Hungarica, vol. 11, no. 7, pp. 239–249, 2014. View at Google Scholar · View at Scopus
  12. J. Z. Zhang, M. M. Michalenko, E. Kuhl, and T. C. Ovaert, “Characterization of indentation response and stiffness reduction of bone using a continuum damage model,” Journal of Thermal Mechanical Behavior of Biomedical Materials, vol. 3, pp. 189–202, 2010. View at Google Scholar
  13. C. Ciofu and G. Creţu, “Some aspects concerning the micro indentation on testing of ultramid plastic materials,” International Journal of Modern Manufacturing Technologies, vol. 6, pp. 2067–3604, 2014. View at Google Scholar
  14. S. Amiri, N. Lecis, A. Manes, and M. Giglio, “A study of a micro-indentation technique for estimating the fracture toughness of Al6061-T6,” Mechanics Research Communications, vol. 58, pp. 10–16, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Rabe, J.-M. Breguet, P. Schwaller et al., “Observation of fracture and plastic deformation during indentation and scratching inside the scanning electron microscope,” Thin Solid Films, vol. 469-470, pp. 206–213, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. N. A. Sakharova, J. V. Fernandes, J. M. Antunes, and M. C. Oliveira, “Comparison between Berkovich, Vickers and conical indentation tests: a three-dimensional numerical simulation study,” International Journal of Solids and Structures, vol. 46, no. 5, pp. 1095–1104, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. W. G. Mao, Y. G. Shen, and C. Lu, “Deformation behavior and mechanical properties of polycrystalline and single crystal alumina during nanoindentation,” Scripta Materialia, vol. 65, no. 2, pp. 127–130, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. R. Ghisleni, K. Rzepiejewska-Malyska, L. Philippe, P. Schwaller, and J. Michler, “In situ SEM indentation experiments: Instruments, methodology, and applications,” Microscopy Research and Technique, vol. 72, no. 3, pp. 242–249, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Huang, H. Zhao, Z. Ma et al., “Design and analysis of the precision-driven unit for nano-indentation and scratch test,” Journal of Manufacturing Systems, vol. 31, no. 1, pp. 76–81, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Zhao, H. Huang, Z. Yang, Z. Ma, and Z. Fan, Design, Analysis and Experiments of a Novel in situ SEM Indentation Device, vol. 12, chapter 12, INTECH, 2012.
  21. L. L. Howell, Compliant Mechanisms, John Wiley & Sons, New York, NY, USA, 2001.
  22. R. S. Kumar, K. Sureshkumar, and R. Velraj, “Optimization of biodiesel production from Manilkara zapota (L.) seed oil using Taguchi method,” Fuel, vol. 140, pp. 90–96, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. H. Tanyildizi and M. Şahin, “Application of Taguchi method for optimization of concrete strengthened with polymer after high temperature,” Construction and Building Materials, vol. 79, pp. 97–103, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Du, W. Du, K. Che, and L. Cheng, “Parametric optimization of overlapped helical baffled heat exchangers by Taguchi method,” Applied Thermal Engineering, vol. 85, pp. 334–339, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Asokan, R. R. Kumar, R. Jeyapaul, and M. Santhi, “Development of multi-objective optimization models for electrochemical machining process,” International Journal of Advanced Manufacturing Technology, vol. 39, no. 1-2, pp. 55–63, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. S. Tarng, S. C. Juang, and C. H. Chang, “The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing,” Journal of Materials Processing Technology, vol. 128, no. 1–3, pp. 1–6, 2002. View at Publisher · View at Google Scholar · View at Scopus
  27. J. L. Deng, “Grey information space,” The Journal of Grey System, vol. 1, no. 2, pp. 103–117, 1989. View at Google Scholar · View at MathSciNet
  28. S. Ilo, C. Just, and F. Xhiku, “Optimisation of multiple quality characteristics of hardfacing using grey-based Taguchi method,” Materials & Design, vol. 33, no. 1, pp. 459–468, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. R. K. Pandey and S. S. Panda, “Multi-performance optimization of bone drilling using Taguchi method based on membership function,” Measurement, vol. 59, pp. 9–13, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Roy, A. K. Das, and R. Banerjee, “Application of Grey-Taguchi based multi-objective optimization strategy to calibrate the PM-NHC-BSFC trade-off characteristics of a CRDI assisted CNG dual-fuel engine,” Journal of Natural Gas Science and Engineering, vol. 21, pp. 524–531, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. U. Çaydaş and A. Hasçalik, “Use of the grey relational analysis to determine optimum laser cutting parameters with multi-performance characteristics,” Optics & Laser Technology, vol. 40, no. 7, pp. 987–994, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. M.-J. Tsai and C.-H. Li, “The use of grey relational analysis to determine laser cutting parameters for QFN packages with multiple performance characteristics,” Optics & Laser Technology, vol. 41, no. 8, pp. 914–921, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. L. A. Zadeh, “Fuzzy sets,” Information and Computation, vol. 8, pp. 338–353, 1965. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  34. C. Chen, G. G. Rigatos, D. Dong, and J. Lam, “Partial feedback control of quantum systems using probabilistic fuzzy estimator,” in Proceedings of the 48th IEEE Conference on Decision and Control, Held Jointly with the 28th Chinese Control Conference (CDC/CCC '09), pp. 3805–3810, IEEE, Shanghai, China, December 2009.
  35. C. Chen and T. Xiao, “Probabilistic fuzzy control of mobile robots for range sensor based reactive navigation,” Intelligent Control and Automation, vol. 2, pp. 77–85, 2011. View at Google Scholar
  36. S. Chen and C. Chen, “Probabilistic fuzzy system for uncertain localization and map building of mobile robots,” IEEE Transactions on Instrumentation and Measurement, vol. 61, no. 6, pp. 1546–1560, 2012. View at Publisher · View at Google Scholar · View at Scopus
  37. Y.-H. Chang, C.-L. Chen, W.-S. Chan, H.-W. Lin, and C.-W. Chang, “Fuzzy formation control and collision avoidance for multiagent systems,” Mathematical Problems in Engineering, vol. 2013, Article ID 908180, 18 pages, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  38. Y.-F. Tzeng and F.-C. Chen, “Multi-objective optimisation of high-speed electrical discharge machining process using a Taguchi fuzzy-based approach,” Materials and Design, vol. 28, no. 4, pp. 1159–1168, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. A. K. Pandey and A. K. Dubey, “Taguchi based fuzzy logic optimization of multiple quality characteristics in laser cutting of Duralumin sheet,” Optics and Lasers in Engineering, vol. 50, no. 3, pp. 328–335, 2012. View at Publisher · View at Google Scholar · View at Scopus
  40. N.-M. Liu, J.-T. Horng, and K.-T. Chiang, “The method of grey-fuzzy logic for optimizing multi-response problems during the manufacturing process: a case study of the light guide plate printing process,” International Journal of Advanced Manufacturing Technology, vol. 41, no. 1-2, pp. 200–210, 2009. View at Publisher · View at Google Scholar · View at Scopus
  41. R. K. Pandey and S. S. Panda, “Optimization of bone drilling parameters using grey-based fuzzy algorithm,” Measurement, vol. 47, no. 1, pp. 386–392, 2014. View at Publisher · View at Google Scholar · View at Scopus
  42. Y.-S. Yang and W. Huang, “A grey-fuzzy Taguchi approach for optimizing multi-objective properties of zirconium-containing diamond-like carbon coatings,” Expert Systems with Applications, vol. 39, no. 1, pp. 743–750, 2012. View at Publisher · View at Google Scholar · View at Scopus
  43. T. Rajmohan, K. Palanikumar, and S. Prakash, “Grey-fuzzy algorithm to optimise machining parameters in drilling of hybrid metal matrix composites,” Composites Part B: Engineering, vol. 50, pp. 297–308, 2013. View at Publisher · View at Google Scholar · View at Scopus
  44. A. K. Pandey and A. K. Dubey, “Multiple quality optimization in laser cutting of difficult-to-laser-cut material using grey-fuzzy methodology,” International Journal of Advanced Manufacturing Technology, vol. 65, no. 1, pp. 421–431, 2013. View at Publisher · View at Google Scholar · View at Scopus
  45. H. S. Lu, J. Y. Chen, and C. T. Chung, “The optimal cutting parameter design of rough cutting process in side milling,” Journal of Achievements in Materials and Manufacturing, vol. 29, pp. 183–186, 2008. View at Google Scholar
  46. K.-T. Chiang and F.-P. Chang, “Application of grey–fuzzy logic on the optimal process design of an injection-molded part with a thin shell feature,” International Communications in Heat and Mass Transfer, vol. 33, no. 1, pp. 94–101, 2006. View at Publisher · View at Google Scholar · View at Scopus
  47. C. Ahilan, S. Kumanan, and N. Sivakumaran, “Multi-objective optimisation of CNC turning process using grey based fuzzy logic,” International Journal of Machining and Machinability of Materials, vol. 5, no. 4, pp. 434–451, 2009. View at Publisher · View at Google Scholar · View at Scopus
  48. J.-H. Yeh and T.-N. Tsai, “Optimizing the fine-pitch copper wire bonding process with multiple quality characteristics using a grey-fuzzy Taguchi method,” Microelectronics Reliability, vol. 54, no. 1, pp. 287–296, 2014. View at Publisher · View at Google Scholar · View at Scopus
  49. ANSYS, ANSYS Workbench User's Guide, ANSYS, Canonsburg, Pa, USA, 2015.
  50. M. J. Wierman, Fuzzy Sets, Fuzzy Logic, and Control, Center of Mathematics of Uncertainty, Inc, Omaha, Nebraska, 2008.
  51. G. J. Klir and B. Yuan, Fuzzy Sets and Fuzzy Logic: Theory and Applications, Prentice Hall, New Delhi, India, 3rd edition, 2005.