Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 8216746, 8 pages
http://dx.doi.org/10.1155/2016/8216746
Research Article

Design and Evaluation for Target Indicated Torque Based Engine Starting Control Strategy in a High Pressure Common Rail Diesel Engine

State Key Laboratory of Automobile Simulation and Control, Jilin University, Changchun 130022, China

Received 16 November 2015; Accepted 17 February 2016

Academic Editor: Muhammad N. Akram

Copyright © 2016 Xuedong Lin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill, New York, NY, USA, 1988.
  2. G. D. Neely, D. Mehta, and J. Sarlashkar, “Diesel cold-start emission control research for 2015–2025 LEV III emissions-part 2,” SAE Paper 2014-01-1552, 2014. View at Google Scholar
  3. M. Weilenmann, J.-Y. Favez, and R. Alvarez, “Cold-start emissions of modern passenger cars at different low ambient temperatures and their evolution over vehicle legislation categories,” Atmospheric Environment, vol. 43, no. 15, pp. 2419–2429, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Manuel, D. Gonzalez, G. L. Borman, and R. D. Reitz, “A study of diesel cold starting using both cycle analysis and multidimensional calculations,” SAE Paper 910180, SAE International, 1991. View at Google Scholar
  5. A. Zahdeh and N. Henein, “Diesel cold starting: actual cycle analysis under border-line conditions,” SAE Paper 900441, 1990. View at Google Scholar
  6. Z. Han, N. Henein, and B. Nitu, “Diesel engine cold start combustion instability and control strategy,” SAE Paper 2001-01-1237, 2001. View at Google Scholar
  7. N. A. Henein, A. R. Zahdeh, and M. K. Yassine, “Diesel engine cold starting: combustion instability,” SAE Paper 920005, SAE International, 1992. View at Google Scholar
  8. C. Dardiotis, G. Martini, A. Marotta, and U. Manfredi, “Low-temperature cold-start gaseous emissions of late technology passenger cars,” Applied Energy, vol. 111, pp. 468–478, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Windeatt, G. Brady, P. Usher, H. Li, and A. Hadavi, “Real world cold start emissions from a diesel vehicle,” SAE Paper 2012-01-1075, 2012. View at Google Scholar
  10. P. Bielaczyc, J. Merkisz, and J. Pielecha, “A method of reducing the exhaust emissions from DI diesel engines by the introduction of a fuel cut off system during cold start,” SAE Paper 2001-01-3283, SAE International, 2001. View at Google Scholar
  11. A. Broatch, J. M. Luján, S. Ruiz, and P. Olmeda, “Measurement of hydrocarbon and carbon monoxide emissions during the starting of automotive di Diesel engines,” International Journal of Automotive Technology, vol. 9, no. 2, pp. 129–140, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Roberts, R. Brooks, and P. Shipway, “Internal combustion engine cold-start efficiency: a review of the problem, causes and potential solutions,” Energy Conversion and Management, vol. 82, pp. 327–350, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Zhong, S. Gruenewald, and N. A. Henein, “Lower temperature limits for cold starting of diesel engine with a common rail fuel injection system,” SAE Paper 2007-01-0934, 2007. View at Google Scholar
  14. R. A. Sakunthalai, H. Xu, D. Liu, J. Tian, M. Wyszynski, and J. Piaszyk, “Impact of cold ambient conditions on cold start and idle emissions from diesel engines,” SAE Paper 2014-01-2715, SAE International, 2014. View at Google Scholar
  15. D. John, P. Ghodke, N. Gajarlawar, and J. J. lng, “Experiences in cold start optimization of a multi-purpose vehicle equipped with 2.2L common rail diesel engine,” SAE Paper 2011-01-0124, 2011. View at Google Scholar
  16. J. V. Pastor, J. M. García-Oliver, J. M. Pastor, and J. G. Ramírez-Hernández, “Ignition and combustion development for high speed direct injection diesel engines under low temperature cold start conditions,” Fuel, vol. 90, no. 4, pp. 1556–1566, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. J. M. Desantes, J. M. García-Oliver, J. M. Pastor, and J. G. Ramírez-Hernández, “Influence of nozzle geometry on ignition and combustion for high-speed direct injection diesel engines under cold start conditions,” Fuel, vol. 90, no. 11, pp. 3359–3368, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. J. V. Pastor, V. Bermúdez, J. M. García-Oliver, and J. G. Ramírez-Hernández, “Influence of spray-glow plug configuration on cold start combustion for high-speed direct injection diesel engines,” Energy, vol. 36, no. 9, pp. 5486–5496, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Broatch, S. Ruiz, X. Margot, and A. Gil, “Methodology to estimate the threshold in-cylinder temperature for self-ignition of fuel during cold start of Diesel engines,” Energy, vol. 35, no. 5, pp. 2251–2260, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Perrin, J.-P. Dumas, O. Laget, and B. Walter, “Analysis of combustion process in cold operation with a low compression ratio diesel engine,” SAE Paper 2010-01-1267, SAE International, 2010. View at Google Scholar
  21. B. Walter, H. Perrin, J. P. Dumas, and O. Laget, “Cold operation with optical and numerical investigations on a low compression ratio diesel engine,” SAE Paper 2009-01-2714, SAE International, 2009. View at Google Scholar
  22. P. Pacaud, H. Perrin, and O. Laget, “Cold start on diesel engine: is low compression ratio compatible with cold start requirements?” SAE Paper 2008-01-1310, SAE International, 2008. View at Google Scholar
  23. O. Laget, P. Pacaud, and H. Perrin, “Cold start on low compression ratio diesel engine: experimental and 3D RANS computation investigations,” Oil & Gas Science and Technology—Revue d'IFP Energies nouvelles, vol. 64, no. 3, pp. 407–429, 2009. View at Publisher · View at Google Scholar
  24. D. MacMillan, A. La Rocca, and P. J. Shayler, “The effect of reducing compression ratio on the work output and heat release characteristics of a DI diesel under cold start conditions,” SAE Paper 2008-01-1306, SAE International, 2008. View at Google Scholar
  25. H. Peng, Y. Cui, L. Shi, and K. Deng, “Effects of exhaust gas recirculation (EGR) on combustion and emissions during cold start of direct injection (DI) diesel engine,” Energy, vol. 33, no. 3, pp. 471–479, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Cui, H. Peng, K. Deng, and L. Shi, “The effects of unburned hydrocarbon recirculation on ignition and combustion during diesel engine cold starts,” Energy, vol. 64, pp. 323–329, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Huang, F. Yang, M. Ouyang, L. Chen, and X. Yang, “Optimal feedback control with in-cylinder pressure sensor under engine start conditions,” SAE Paper 2011-01-1422, 2011. View at Google Scholar
  28. Bosch, “The 3rd generation Common Rail from Bosch[R/OL],” December 2003, http://www.boschautoparts.co.uk/.
  29. Freescale, “MC9S12XEP100 Reference Manual Covers MC9S12XE Family, Rev. 1.15,” 2008, http://www.freescale.com/.
  30. Freescale, CodeWarrior Development Tools, http://www.freescale.com.