Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016 (2016), Article ID 8783615, 8 pages
http://dx.doi.org/10.1155/2016/8783615
Research Article

Loss Prediction and Thermal Analysis of Surface-Mounted Brushless AC PM Machines for Electric Vehicle Application Considering Driving Duty Cycle

1Jinhua Polytechnic, Zhejiang 321007, China
2Beijing Institute of Technology, Beijing 100081, China

Received 11 May 2015; Revised 21 June 2015; Accepted 5 July 2015

Academic Editor: Xiaosong Hu

Copyright © 2016 Tianxun Chen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Hu, N. Murgovski, L. M. Johannesson, and B. Egardt, “Comparison of three electrochemical energy buffers applied to a hybrid bus powertrain with simultaneous optimal sizing and energy management,” IEEE Transactions on Intelligent Transportation Systems, vol. 15, no. 3, pp. 1193–1205, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. X. Hu, N. Murgovski, L. Johannesson, and B. Egardt, “Energy efficiency analysis of a series plug-in hybrid electric bus with different energy management strategies and battery sizes,” Applied Energy, vol. 111, pp. 1001–1009, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. X. Hu, L. Johannesson, N. Murgovski, and B. Egardt, “Longevity-conscious dimensioning and power management of the hybrid energy storage system in a fuel cell hybrid electric bus,” Applied Energy, vol. 137, pp. 913–924, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Fan, C. Zhang, Z. Wang et al., “Thermal analysis of permanent magnet motor for the electric vehicle application considering driving duty cycle,” IEEE Transactions on Magnetics, vol. 46, no. 6, pp. 2493–2496, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Chau and W. Li, “Overview of electric machines for electric and hybrid vehicles,” International Journal of Vehicle Design, vol. 64, no. 1, pp. 46–71, 2014. View at Publisher · View at Google Scholar
  6. J. Pries and H. Hofmann, “Magnetic and thermal scaling of electric machines,” International Journal of Vehicle Design, vol. 61, no. 1–4, pp. 219–232, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Wrobel, G. Vainel, C. Copeland, T. Duda, D. Staton, and P. Mellor, “Investigation of mechanical loss and heat transfer in an axial-flux PM machine,” in Proceedings of the 5th Annual IEEE Energy Conversion Congress and Exhibition (ECCE '13), pp. 4372–4379, September 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. D. A. Howey, A. S. Holmes, and K. R. Pullen, “Measurement and CFD prediction of heat transfer in air-cooled disc-type electrical machines,” IEEE Transactions on Industry Applications, vol. 47, no. 4, pp. 1716–1723, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. D. A. Howey, A. S. Holmes, and K. R. Pullen, “Measurement of stator heat transfer in air-cooled axial flux permanent magnet machines,” in Proceedings of the 35th Annual Conference of the IEEE Industrial Electronics Society (IECON '09), pp. 1197–1202, November 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. A. C. Malloy, R. F. Martinez-Botas, M. Jaensch, and M. Lamperth, “Measurement of heat generation rate in the permanent magnets of rotating electrical machines,” in Proceedings of the 6th IET International Conference on Power Electronics, Machines and Drives (PEMD '12), pp. 1–6, March 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. C. P. Steinmetz, “On the law of hysteresis (originally published in 1892),” Proceedings of the IEEE, vol. 72, no. 2, pp. 196–221, 1984. View at Google Scholar
  12. G. Bertotti, “General properties of power losses in soft ferromagnetic materials,” IEEE Transactions on Magnetics, vol. 24, no. 1, pp. 621–630, 1988. View at Publisher · View at Google Scholar · View at Scopus
  13. K. W. E. Cheng and P. D. Evans, “Calculation of winding losses in high-frequency toroidal inductors using single strand conductors,” IEE Proceedings: Electric Power Applications, vol. 141, no. 2, pp. 52–62, 1994. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Acero, R. Alonso, J. M. Burdío, L. A. Barragán, and D. Puyal, “Frequency-dependent resistance in Litz-wire planar windings for domestic induction heating appliances,” IEEE Transactions on Power Electronics, vol. 21, no. 4, pp. 856–866, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. A.-T. Phung, G. Meunier, O. Chadebec, X. Margueron, and J.-P. Keradec, “High-frequency proximity losses determination for rectangular cross-section conductors,” IEEE Transactions on Magnetics, vol. 43, no. 4, pp. 1213–1216, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Atallah, D. Howe, P. H. Mellor, and D. A. Stone, “Rotor loss in permanent-magnet brushless AC machines,” IEEE Transactions on Industry Applications, vol. 36, no. 6, pp. 1612–1618, 2000. View at Publisher · View at Google Scholar · View at Scopus
  17. L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Analytical modelling and analysis of open-circuit PM power loss in surface-mounted permanent magnet machines,” IEEE Transactions on Magnetics, vol. 48, no. 3, pp. 1234–1246, 2011. View at Google Scholar
  18. G. L. Skibinski, B. G. Schram, J. R. Brauer, and Z. Badics, “Finite element prediction of losses and temperatures of laminated composite inductors for AC drives,” in Proceedings of the IEEE International Electric Machines and Drives Conference (IEMDC '03), pp. 756–763, June 2003.
  19. Y. Kawase, T. Ota, and H. Fukunaga, “3-D eddy current analysis in permanent magnet of interior permanent magnet motors,” IEEE Transactions on Magnetics, vol. 36, no. 4, pp. 1863–1866, 2000. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. Kolondzovski, A. Belahcen, and A. Arkkio, “Comparative thermal analysis of different rotor types for a high-speed permanent-magnet electrical machine,” IET Electric Power Applications, vol. 3, no. 4, pp. 279–288, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. P. H. Mellor, D. Roberts, and D. R. Turner, “Lumped parameter thermal model for electrical machines of TEFC design,” IEE Proceedings B: Electric Power Applications, vol. 138, no. 5, pp. 205–218, 1991. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Wrobel, J. Goss, A. Mlot, and P. H. Mellor, “Design considerations of a brushless open-slot radial-flux PM hub motor,” IEEE Transactions on Industry Applications, vol. 50, no. 3, pp. 1757–1767, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. P. H. Mellor, R. Wrobel, and D. Holliday, “A computationally efficient iron loss model for brushless AC machines that caters for rated flux and field weakened operation,” in Proceedings of the IEEE International Electric Machines and Drives Conference (IEMDC '09), pp. 490–494, May 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Wrobel, D. E. Salt, A. Griffo, N. Simpson, and P. H. Mellor, “Derivation and scaling of AC copper loss in thermal modeling of electrical machines,” IEEE Transactions on Industrial Electronics, vol. 61, no. 8, pp. 4412–4420, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. X. Wu, R. Wrobel, P. H. Mellor, and C. Zhang, “A computationally efficient PM power loss derivation for surface-mounted brushless AC PM machines,” in Proceedings of the 21st International Conference on Electrical Machines (ICEM '14), pp. 17–23, IEEE, September 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. N. Simpson, R. Wrobel, and P. H. Mellor, “Estimation of equivalent thermal parameters of impregnated electrical windings,” IEEE Transactions on Industry Applications, vol. 49, no. 6, pp. 2505–2515, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. Z. Hashin, “Theory of fiber reinforced materials,” NASA Contractor Report, NASA, Washington, DC, USA, 1972. View at Google Scholar
  28. E. Behrens, “Thermal conductivities of composite materials,” Journal of Composite Materials, vol. 2, no. 1, pp. 2–17, 1968. View at Publisher · View at Google Scholar
  29. J. Donea, “Thermal conductivities based on variational principles,” Journal of Composite Materials, vol. 6, no. 2, pp. 262–266, 1972. View at Publisher · View at Google Scholar
  30. R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two-component systems,” Industrial and Engineering Chemistry Fundamentals, vol. 1, no. 3, pp. 187–191, 1962. View at Publisher · View at Google Scholar · View at Scopus
  31. F. P. Incropera and D. P. DeWitt, Fundamentals of Heat and Mass Transfer, Wiley, New York, NY, USA, 4th edition, 2001.