Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2016, Article ID 9209362, 13 pages
http://dx.doi.org/10.1155/2016/9209362
Research Article

A Combined Method in Parameters Optimization of Hydrocyclone

1School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
2College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832003, China

Received 17 August 2016; Accepted 25 October 2016

Academic Editor: Sandro Longo

Copyright © 2016 Jing-an Feng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Liu, X. Wang, and J. Cao, “Effect of ultrasonic process on carbide slag activity and synthesized xonotlite,” Physics Procedia, vol. 25, pp. 56–62, 2012. View at Publisher · View at Google Scholar
  2. S. Zhang, X. Gong, Z. Wang, J. Cao, and Z. Guo, “Preparation of block CaO from carbide slag and its compressive strength improved by H3PO4,” International Journal of Mineral Processing, vol. 129, pp. 6–11, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Yang, J. Cao, Z. Wang, H. Chen, and X. Gong, “Discovery of impurities existing state in carbide slag by chemical dissociation,” International Journal of Mineral Processing, vol. 130, pp. 66–73, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. S. U. Özgen, A. Yıldız, A. Çalışkan, and E. Sabah, “Modeling and optimization of hydrocyclone processing of low grade bentonites,” Applied Clay Science, vol. 46, no. 3, pp. 305–313, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Swain and S. Mohanty, “A 3-dimensional Eulerian-Eulerian CFD simulation of a hydrocyclone,” Applied Mathematical Modelling, vol. 37, no. 5, pp. 2921–2932, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  6. S.-L. Gao, D.-Z. Wei, W.-G. Liu, L.-Q. Ma, T. Lu, and R.-Y. Zhang, “CFD numerical simulation of flow velocity characteristics of hydrocyclone,” Transactions of Nonferrous Metals Society of China, vol. 21, no. 12, pp. 2783–2789, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. A. J. Lynch, T. C. Rao, and C. W. Bailey, “The influence of design and operating variables on the capacities of hydrocyclone classifiers,” International Journal of Mineral Processing, vol. 2, no. 1, pp. 29–37, 1975. View at Publisher · View at Google Scholar · View at Scopus
  8. L. R. Plitt, “Mathematical model of the hydrocyclone classifier,” CIM Bulletin, vol. 69, no. 776, pp. 114–123, 1976. View at Google Scholar · View at Scopus
  9. K. T. Hsieh and K. Rajamani, “Phenomenological model of the hydrocyclone: model development and verification for single-phase flow,” International Journal of Mineral Processing, vol. 22, no. 1–4, pp. 223–237, 1988. View at Publisher · View at Google Scholar · View at Scopus
  10. W. Chen, N. Zydek, and F. Parma, “Evaluation of hydrocyclone models for practical applications,” Chemical Engineering Journal, vol. 80, no. 1–3, pp. 295–303, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Zhao, M. Jiang, and F. Li, “Experimental study on the separation performance of air-injected de-oil hydrocyclones,” Chemical Engineering Research and Design, vol. 88, no. 5-6, pp. 772–778, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. Z. Jeirani, B. M. Jan, B. S. Ali, I. M. Noor, S. C. Hwa, and W. Saphanuchart, “The optimal mixture design of experiments: alternative method in optimizing the aqueous phase composition of a microemulsion,” Chemometrics and Intelligent Laboratory Systems, vol. 112, pp. 1–7, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Selvakumar, G. Sornalatha, S. Sarkar, and S. Mitra, “Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy,” Transactions of Nonferrous Metals Society of China, vol. 24, no. 2, pp. 373–379, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. P. Dixit, R. Tiwari, A. K. Mukherjee, and P. K. Banerjee, “Application of response surface methodology for modeling and optimization of spiral separator for processing of iron ore slime,” Powder Technology, vol. 275, pp. 105–112, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Tang, Y. Xu, X. Song, Z. Sun, and J. Yu, “Numerical study on the relationship between high sharpness and configurations of the vortex finder of a hydrocyclone by central composite design,” Chemical Engineering Journal, vol. 278, pp. 504–516, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Arokiadass, K. Palaniradja, and N. Alagumoorthi, “Prediction and optimization of end milling process parameters of cast aluminium based MMC,” Transactions of Nonferrous Metals Society of China, vol. 22, no. 7, pp. 1568–1574, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. D. O. Silva, L. G. M. Vieira, F. S. Lobato, and M. A. S. Barrozo, “Optimization of the design and performance of hydrocyclones by Differential Evolution technique,” Chemical Engineering and Processing: Process Intensification, vol. 61, pp. 1–7, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Averous and R. Fuentes, “Advances in the numerical simulation of hydrocyclone classification,” Canadian Metallurgical Quarterly, vol. 36, no. 5, pp. 309–314, 1997. View at Publisher · View at Google Scholar · View at Scopus
  19. J. C. Cullivan, R. A. Williams, T. Dyakowski, and C. R. Cross, “New understanding of a hydrocyclone flow field and separation mechanism from computational fluid dynamics,” Minerals Engineering, vol. 17, no. 5, pp. 651–660, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. J. A. Delgadillo and R. K. Rajamani, “A comparative study of three turbulence-closure models for the hydrocyclone problem,” International Journal of Mineral Processing, vol. 77, no. 4, pp. 217–230, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. B. Wang and A. B. Yu, “Numerical study of particle-fluid flow in hydrocyclones with different body dimensions,” Minerals Engineering, vol. 19, no. 10, pp. 1022–1033, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. K. U. Bhaskar, Y. R. Murthy, M. R. Raju, S. Tiwari, J. K. Srivastava, and N. Ramakrishnan, “CFD simulation and experimental validation studies on hydrocyclone,” Minerals Engineering, vol. 20, no. 1, pp. 60–71, 2007. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Safa and A. Soltani Goharrizi, “CFD simulation of an industrial hydrocyclone with Eulerian-Eulerian approach: A Case Study,” International Journal of Mining Science and Technology, vol. 24, no. 5, pp. 643–648, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. P. He, M. Salcudean, and I. S. Gartshore, “A numerical simulation of hydrocyclones,” Chemical Engineering Research and Design, vol. 77, no. 5, pp. 429–441, 1999. View at Publisher · View at Google Scholar · View at Scopus
  25. J. A. Feng, W. B. Wang, X. Q. Tang, Y. J. Qiu, and R. Ying, “Research on structural design of hydrocyclone for refining of carbide slag,” Mining & Processing Equipment, vol. 11, pp. 98–101, 2014 (Chinese). View at Google Scholar