Research Article
Implementation of Real-Time Machining Process Control Based on Fuzzy Logic in a New STEP-NC Compatible System
Figure 10
Selection of adjusting factors.
| (a) 0.9-10.8-8 |
| (b) 0.9-7.2-8 |
| (c) 0.9-10.8-4 |
| (d) 0.9-7.2-4 |
| (a) 0.9-10.8-8 |
| (b) 0.9-7.2-8 |
| (c) 0.9-10.8-4 |
| (d) 0.9-7.2-4 |