Research Article
Reliability Evaluation of NC Machine Tools considering Working Conditions
Table 1
Cutting parameters of workpieces.
| Workpiece name | Cutting tool name | Tool material | Tool type | Rotation speed/(r/min) | Depth of cuts/(mm) | Feed of a tooth/(mm/z) | Cutting breadth/(mm) | Diameter of milling cutter/(mm) | Number of milling cutter teeth |
| Flywheel | φ10 alloy milling cutter | Cemented carbide | End milling cutter | 500 | 3 | 0.011 | 10 | 10 | 4 | Cylinder block | φ25R6 alloy milling cutter | Cemented carbide | Face milling cutter | 1100 | 1.7 | 0.046 | 25 | 25 | 2 | Cylinder head | φ12 alloy milling cutter | Cemented carbide | End milling cutter | 400 | 6.3 | 0.18 | 0.5 | 12 | 4 | Mould | φ25R6 alloy milling cutter | Cemented carbide | End milling cutter | 500 | 1.8 | 0.165 | 15 | 25 | 2 | Flywheel housing | φ50 milling cutter | Cemented carbide | Face milling cutter | 400 | 2.28 | 0.028 | 48 | 50 | 5 | Cylinder | φ40 milling cutter | Cemented carbide | Face milling cutter | 500 | 3 | 0.04 | 36 | 40 | 3 | Connecting plate | φ12 alloy milling cutter | Cemented carbide | End milling cutter | 400 | 5.2 | 0.18 | 0.62 | 12 | 4 |
|
|