Research Article
Performance Analysis of a Hybrid Power Cutting System for Roadheader
Table 1
Parameters of the new hybrid power cutting system.
| ā | Parameters | Value |
| Electric motor | Phase number | 3 | Number of pole pairs | 3 | Stator current frequency [Hz] | 50 | Phase voltage [V] | 1140 |
| Hydraulic motor | Displacement [ml/r] | 80 | Maximum speed [rpm] | 3900 | Circuit pressure [MPa] | 25 |
| Cutting head | Inertia of cutting head [kgm2] | 500 | Stiffness of spline sleeve [Nm/rad] | 109 | Damping of spline sleeve [Nm/(rad/s)] | 102 |
|
|