Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017, Article ID 4295805, 12 pages
https://doi.org/10.1155/2017/4295805
Research Article

Nonlinear Dynamics Response of a Planar Mechanism with Two Driving Links and Prismatic Pair Clearance

1Department of Mechanical Engineering, Auburn University, 1418 Wiggins Hall, Auburn, AL 36849-5341, USA
2Department of Mechanical Engineering, Shanghai Dianji University, Shanghai, China

Correspondence should be addressed to Dan B. Marghitu; ude.nrubua@utihgram

Received 16 April 2017; Revised 16 June 2017; Accepted 20 June 2017; Published 8 August 2017

Academic Editor: Mohammed Nouari

Copyright © 2017 Lijuan Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Dubowsky and F. Freudenstein, “Dynamic analysis of mechanical systems with clearances part 2: dynamic response,” Journal of Engineering for Industry, vol. 93, no. 1, pp. 310–316, 1971. View at Publisher · View at Google Scholar
  2. S. Erkaya and I. Uzmay, “Experimental investigation of joint clearance effects on the dynamics of a slider-crank mechanism,” Multibody System Dynamics, vol. 24, no. 1, pp. 81–102, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. P. Flores, C. S. Koshy, H. M. Lankarani, J. Ambrósio, and J. C. P. Claro, “Numerical and experimental investigation on multibody systems with revolute clearance joints,” Nonlinear Dynamics, vol. 65, no. 4, pp. 383–398, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Houfek and L. Houfek, “Bifurcation and chaos in couplings with clearance,” Advanced Materials Research, vol. 936, pp. 2120–2124, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Yaqubi, M. Dardel, and H. M. Daniali, “Nonlinear dynamics and control of crank-slider mechanism with link flexibility and joint clearance,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 230, no. 5, pp. 737–755, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. Wang, Q. Tian, H. Hu, and P. Flores, “Nonlinear dynamics and chaotic control of a flexible multibody system with uncertain joint clearance,” Nonlinear Dynamics, vol. 86, no. 3, pp. 1571–1597, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Dupac and D. G. Beale, “Dynamic analysis of a flexible linkage mechanism with cracks and clearance,” Mechanism and Machine Theory, vol. 45, no. 12, pp. 1909–1923, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Flores, J. Ambrósio, J. C. P. Claro, and H. M. Lankarani, “Dynamic behaviour of planar rigid multi-body systems including revolute joints with clearance,” Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, vol. 221, no. 2, pp. 161–174, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. A. B. Nordmark, “Non-periodic motion caused by grazing incidence in an impact oscillator,” Journal of Sound and Vibration, vol. 145, no. 2, pp. 279–297, 1991. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Zukovic and L. Cveticanin, “Chaotic responses in a stable duffing system of non-ideal type,” JVC/Journal of Vibration and Control, vol. 13, no. 6, pp. 751–767, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Erkaya and I. Uzmay, “Investigation on effect of joint clearance on dynamics of four-bar mechanism,” Nonlinear Dynamics, vol. 58, no. 1-2, pp. 179–198, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. O. Muvengei, J. Kihiu, and B. Ikua, “Dynamic analysis of planar multi-body systems with LuGre friction at differently located revolute clearance joints,” Multibody System Dynamics, vol. 28, no. 4, pp. 369–393, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  13. S. P. Timoshenko and J. M. Gere, Theory of Elastic Stability, Courier Corporation, 2009.
  14. H. Hertz, “Üher die berührung fester elastischer körper (on the contact of elastic solids),” Journal fur die Reine und Andegwandte Mathematik, vol. 92, pp. 156–171, 1882. View at Publisher · View at Google Scholar · View at MathSciNet
  15. K. Hunt and F. Crossley, “Coefficient of restitution interpreted as damping in vibroimpact,” Journal of Applied Mechanics, vol. 42, no. 2, pp. 440–445, 1975. View at Google Scholar
  16. H. Lankarani and P. E. Nikravesh, “A contact force model with hysteresis damping for impact analysis of multibody systems,” Journal of Mechanical Design, vol. 112, no. 3, pp. 369–376, 1990. View at Google Scholar
  17. P. Ravn, “A continuous analysis method for planar multibody systems with joint clearance,” Multibody System Dynamics, vol. 2, no. 1, pp. 1–24, 1998. View at Google Scholar
  18. P. Flores and J. Ambrósio, “Revolute joints with clearance in multibody systems,” Computers & Structures, vol. 82, no. 17, pp. 1359–1369, 2004. View at Google Scholar
  19. A. L. Schwab, J. P. Meijaard, and P. Meijers, “A comparison of revolute joint clearance models in the dynamic analysis of rigid and elastic mechanical systems,” Mechanism and Machine Theory, vol. 37, no. 9, pp. 895–913, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. F. Bai and Y. Zhao, “Dynamic behaviour analysis of planar mechanical systems with clearance in revolute joints using a new hybrid contact force model,” International Journal of Mechanical Sciences, vol. 54, no. 1, pp. 190–205, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. P. Flores, M. MacHado, M. T. Silva, and J. M. Martins, “On the continuous contact force models for soft materials in multibody dynamics,” Multibody System Dynamics, vol. 25, no. 3, pp. 357–375, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Gharib and Y. Hurmuzlu, “A new contact force model for low coefficient of restitution impact,” Journal of Applied Mechanics, Transactions ASME, vol. 79, no. 6, Article ID 064506, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Ma, L. Qian, G. Chen, and M. Li, “Dynamic analysis of mechanical systems with planar revolute joints with clearance,” Mechanism and Machine Theory, vol. 94, article no. 2549, pp. 148–164, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Kane, “Impulsive motions,” Journal of Applied Mechanics, vol. 29, no. 4, pp. 715–718, 1962. View at Google Scholar
  25. D. B. Marghitu and Y. Hurmuzlu, “Nonlinear dynamics of an elastic rod with frictional impact,” Nonlinear Dynamics. An International Journal of Nonlinear Dynamics and Chaos in Engineering Systems, vol. 10, no. 2, pp. 187–201, 1996. View at Publisher · View at Google Scholar · View at MathSciNet
  26. E. D. Stoenescu and D. B. Marghitu, “Dynamic analysis of a planar rigid-link mechanism with rotating slider joint and clearance,” Journal of Sound and Vibration, vol. 266, no. 2, pp. 394–404, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. I. Khemili and L. Romdhane, “Dynamic analysis of a flexible slider-crank mechanism with clearance,” European Journal of Mechanics—A/Solids, vol. 27, no. 5, pp. 882–898, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. G. B. Daniel and K. L. Cavalca, “Analysis of the dynamics of a slider-crank mechanism with hydrodynamic lubrication in the connecting rod-slider joint clearance,” Mechanism and Machine Theory, vol. 46, no. 10, pp. 1434–1452, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. E. Zheng, R. Zhu, S. Zhu, and X. Lu, “A study on dynamics of flexible multi-link mechanism including joints with clearance and lubrication for ultra-precision presses,” Nonlinear Dynamics. An International Journal of Nonlinear Dynamics and Chaos in Engineering Systems, vol. 83, no. 1-2, pp. 137–159, 2016. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  30. P. Gu, S. Dubowsky, and C. Mavroidis, “The design implications of chaotic and near-chaotic vibrations in machines,” in Proceedings of the 1998 ASME Design Technical Conferences, 1998.
  31. K. Kappaganthu and C. Nataraj, “Nonlinear modeling and analysis of a rolling element bearing with a clearance,” Communications in Nonlinear Science and Numerical Simulation, vol. 16, no. 10, pp. 4134–4145, 2011. View at Publisher · View at Google Scholar · View at Scopus
  32. L. D. Seneviratne and S. W. E. Earles, “Chaotic behaviour exhibited during contact loss in a clearance joint of a four-bar mechanism,” Mechanism and Machine Theory, vol. 27, no. 3, pp. 307–321, 1992. View at Publisher · View at Google Scholar · View at Scopus
  33. F. Farahanchi and S. W. Shaw, “Chaotic and periodic dynamics of a slider-crank mechanism with slider clearance,” Journal of Sound and Vibration, vol. 177, no. 3, pp. 307–324, 1994. View at Publisher · View at Google Scholar · View at Scopus
  34. P. Flores, “A parametric study on the dynamic response of planar multibody systems with multiple clearance joints,” Nonlinear Dynamics, vol. 61, no. 4, pp. 633–653, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Azimi Olyaei and M. R. Ghazavi, “Stabilizing slider-crank mechanism with clearance joints,” Mechanism and Machine Theory, vol. 53, pp. 17–29, 2012. View at Publisher · View at Google Scholar · View at Scopus
  36. O. Muvengei, J. Kihiu, and B. Ikua, “Numerical study of parametric effects on the dynamic response of planar multi-body systems with differently located frictionless revolute clearance joints,” Mechanism and Machine Theory, vol. 53, pp. 30–49, 2012. View at Publisher · View at Google Scholar · View at Scopus
  37. Y. Tang, Z. Chang, X. Dong, Y. Hu, and Z. Yu, “Nonlinear dynamics and analysis of a four-bar linkage with clearance,” Frontiers of Mechanical Engineering, vol. 8, no. 2, pp. 160–168, 2013. View at Publisher · View at Google Scholar · View at Scopus
  38. J. Alves, N. Peixinho, M. T. Da Silva, P. Flores, and H. M. Lankarani, “A comparative study of the viscoelastic constitutive models for frictionless contact interfaces in solids,” Mechanism and Machine Theory, vol. 85, pp. 172–188, 2015. View at Publisher · View at Google Scholar · View at Scopus
  39. P. Welch, “The use of fast fourier transform for the estimation of power spectra: a method based on time averaging over short, modified periodograms,” IEEE Transactions on Audio and Electroacoustics, vol. 15, no. 2, pp. 70–73, 1967. View at Publisher · View at Google Scholar
  40. M. W. Hirsch, S. Smale, and R. L. Devaney, Differential Equations, Dynamical Systems, and an Introduction to Chaos, Academic press, 2012.
  41. S. Wiggins, Introduction to Applied Nonlinear Dynamical Systems and Chaos, vol. 2, Springer Science+Business Media, 2003.
  42. A. Wolf, J. B. Swift, H. L. Swinney, and J. A. Vastano, “Determining Lyapunov exponents from a time series,” Physica D. Nonlinear Phenomena, vol. 16, no. 3, pp. 285–317, 1985. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  43. J. B. Dingwell and L. C. Marin, “Kinematic variability and local dynamic stability of upper body motions when walking at different speeds,” Journal of Biomechanics, vol. 39, no. 3, pp. 444–452, 2006. View at Publisher · View at Google Scholar · View at Scopus
  44. M. T. Rosenstein, J. J. Collins, and C. J. De Luca, “A practical method for calculating largest Lyapunov exponents from small data sets,” Physica D. Nonlinear Phenomena, vol. 65, no. 1-2, pp. 117–134, 1993. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus