Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017 (2017), Article ID 5093404, 10 pages
https://doi.org/10.1155/2017/5093404
Research Article

Thermoelastic Analysis for Two Collinear Cracks in an Orthotropic Solid Disturbed by Antisymmetrical Linear Heat Flow

1Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University, Nanjing, Jiangsu 210098, China
2Jiangsu Research Center of Geotechnical Engineering Technology, Hohai University, Nanjing, Jiangsu 210098, China
3Department of Mechanical and Aerospace Engineering, Monash University, Clayton, VIC 3800, Australia

Correspondence should be addressed to Jun-gao Zhu

Received 2 May 2017; Revised 19 July 2017; Accepted 31 July 2017; Published 19 November 2017

Academic Editor: Nunzio Salerno

Copyright © 2017 Bing Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. C. Sih, J. Michopoloulos, and S. C. Chou, Hygrothermoelasticity, Martinus Niijhoof Publishing, Leiden, The Netherlands, 1986.
  2. G. R. Trwin, “Analysis of stress and strains near the end of a crack transversing a plate,” Journal of Applied Mechanics, vol. 24, pp. 109–114, 1957. View at Google Scholar
  3. J. R. Rice, “A path independent integral and the approximate analysis of strain concentration by notches and cracks,” Journal of Applied Mechanics, vol. 35, no. 2, pp. 379–386, 1968. View at Publisher · View at Google Scholar
  4. J. L. Nowinski, Theory of Thermoelasticity with Applications, Sijthoff and Noordhoff, Alphen aan den Rijn, The Netherlands, 1978. View at Publisher · View at Google Scholar
  5. C. Atkinson and D. L. Clements, “On some crack problems in anisotropic thermoelasticity,” International Journal of Solids and Structures, vol. 13, no. 9, pp. 855–864, 1977. View at Publisher · View at Google Scholar · View at Scopus
  6. G. C. Sih, “On the singular character of thermal stresses near a crack tip,” Journal of Applied Mechanics, vol. 29, no. 3, p. 587, 1962. View at Publisher · View at Google Scholar
  7. Y. M. Tsai, “Orthotropic thermoelastic problem of uniform heat flow disturbed by a central crack,” Journal of Composite Materials, vol. 18, no. 2, pp. 122–131, 1984. View at Publisher · View at Google Scholar · View at Scopus
  8. B. X. Chen and X. Z. Zhang, “Thermoelasticity problem of an orthotropic plate with two collinear cracks,” International Journal of Fracture, vol. 38, no. 3, pp. 161–192, 1988. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  9. W. K. Wilson and I. W. Yu, “The use of J-integral in thermal stress crack problems,” International Journal of Fracture, vol. 15, pp. 377–387, 1979. View at Google Scholar
  10. D. Chang and A. Kotousov, “A strip yield model for two collinear cracks,” Engineering Fracture Mechanics, vol. 90, pp. 121–128, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. N. N. V. Prasad, M. H. Aliabadi, and D. P. Rooke, “The dual boundary element method for transient thermoelastic crack problems,” International Journal of Solids and Structures, vol. 33, no. 19, pp. 2695–2718, 1996. View at Publisher · View at Google Scholar · View at Scopus
  12. L. M. Brock, “Reflection and diffraction of plane temperature-step waves in orthotropic thermoelastic solids,” Journal of Thermal Stresses, vol. 33, no. 9, pp. 879–904, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Thangjitham and Choi H. J., “Thermal stress singularities in an anisotropic slab containing a crack,” Mechanics of Materials, vol. 14, no. 3, pp. 223–238, 1993. View at Publisher · View at Google Scholar · View at Scopus
  14. K. Hu and Z. Chen, “Thermoelastic analysis of a partially insulated crack in a strip under thermal impact loading using the hyperbolic heat conduction theory,” International Journal of Engineering Science, vol. 51, pp. 144–160, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  15. K. Q. Hu and Z. T. Chen, “Transient heat conduction analysis of a cracked half-plane using dual-phase-lag theory,” International Journal of Heat and Mass Transfer, vol. 62, no. 1, pp. 445–451, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. X.-C. Zhong and K. Y. Lee, “A thermal-medium crack model,” Mechanics of Materials, vol. 51, pp. 110–117, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. X.-F. Li and K. Y. Lee, “Effect of heat conduction of penny-shaped crack interior on thermal stress intensity factors,” International Journal of Heat and Mass Transfer, vol. 91, Article ID 12302, pp. 127–134, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. D. N. Basu, S. Bhattacharyya, and P. K. Das, “Development of a unified model for the steady-state operation of single-phase natural circulation loops,” International Journal of Heat and Mass Transfer, vol. 62, no. 1, pp. 452–462, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. V. Sundararaman and B. D. Davidson, “An unsymmetric end-notched flexure test for interfacial fracture toughness determination,” Engineering Fracture Mechanics, vol. 60, no. 3, pp. 361–377, 1998. View at Publisher · View at Google Scholar · View at Scopus
  20. S. El-Borgi, F. Erdogan, and L. Hidri, “A partially insulated embedded crack in an infinite functionally graded medium under thermo-mechanical loading,” International Journal of Engineering Science, vol. 42, no. 3-4, pp. 371–393, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Rekik, S. El-Borgi, and Z. Ounaies, “The axisymmetric problem of a partially insulated mixed-mode crack embedded in a functionally graded pyro magneto-electro-elastic infinite medium subjected to thermal loading,” Journal of Thermal Stresses, vol. 35, no. 11, pp. 947–975, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Rekik, M. Neifar, and S. El-Borgi, “An axisymmetric problem of a partially insulated crack embedded in a graded layer bonded to a homogeneous half-space under thermal loading,” Journal of Thermal Stresses, vol. 34, no. 3, pp. 201–227, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. N. I. Mushkelishvili, Singular Integral Equations, Wolters-Noorhoff, Groningen, The Netherlands, 1953.
  24. F. Cakoni and D. Colton, “The linear sampling method for cracks,” Inverse Problems, vol. 19, no. 2, pp. 279–295, 2003. View at Publisher · View at Google Scholar · View at MathSciNet
  25. Q. H. Qin, The Trefftz Finite and Boundary Element Method, WIT Press, Southampton, UK, 2000. View at MathSciNet
  26. A.-Y. Kuo, “Effects of crack surface heat conductance on stress intensity factors,” Journal of Applied Mechanics, vol. 57, no. 2, pp. 354–358, 1990. View at Publisher · View at Google Scholar · View at Scopus
  27. K. Y. Lee and S.-J. Park, “Thermal stress intensity factors for partially insulated interface crack under uniform heat flow,” Engineering Fracture Mechanics, vol. 50, no. 4, pp. 475–482, 1995. View at Publisher · View at Google Scholar · View at Scopus
  28. Y.-D. Lee and F. Erdogan, “Interface cracking of FGM coatings under steady-state heat flow,” Engineering Fracture Mechanics, vol. 59, no. 3, pp. 361–380, 1998. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Zhou, X. Li, and D. Yu, “A partially insulated interface crack between a graded orthotropic coating and a homogeneous orthotropic substrate under heat flux supply,” International Journal of Solids and Structures, vol. 47, no. 6, pp. 768–778, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. T. Zhou and K. Y. Lee, “Thermal response of a partially insulated interface crack in a graded coating-substrate structure under thermo-mechanical disturbance: Energy release and density,” Theoretical and Applied Fracture Mechanics, vol. 56, no. 1, pp. 22–33, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. N. A. Weiss and L. M. Keer, “Heat flow disturbed by periodic array of insulated interface cracks,” Mechanics Research Communications, vol. 54, pp. 50–55, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. Y.-T. Zhou and T.-W. Kim, “Thermal resistance inside an interface crack in the functionally graded sandwich structures,” Fatigue and Fracture of Engineering Materials and Structures, vol. 39, no. 9, pp. 1067–1080, 2016. View at Publisher · View at Google Scholar · View at Scopus
  33. I. S. Gradshteyn and I. M. Ryzhik, Table of Integrals, Series, and Products, Elsevier Academic Press, San Diego, Calif, USA, 2007.
  34. X.-C. Zhong, “Closed-form solutions for two collinear dielectric cracks in a magnetoelectroelastic solid,” Applied Mathematical Modelling, vol. 35, no. 6, pp. 2930–2944, 2011. View at Publisher · View at Google Scholar · View at MathSciNet
  35. S. Itou, “Thermal stress intensity factors of an infinite orthotropic layer with a crack,” International Journal of Fracture, vol. 103, no. 3, pp. 279–291, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. FEMAP—Finite Element Modelling and Post Processing Version 11.1.2, Structural Dynamics Research Corporation, Pennsylvania, 2015.
  37. R. Barsoum, “Further application of quadratic isoparametric elements to linear fracture mechanics of plate bending and general shells,” International Journal of Numerical Methods Engineering, vol. 11, pp. 167–169.
  38. J. F. Williams, R. Jones, and N. Goldsmith, “An introduction to fracture mechanics theory and case studies,” Transactions of the Institution of Engineers, Australia Mechanical Engineering, vol. 44, pp. 185–223, 1989. View at Google Scholar