Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017, Article ID 5170492, 15 pages
https://doi.org/10.1155/2017/5170492
Research Article

Direct Yaw-Moment Control of All-Wheel-Independent-Drive Electric Vehicles with Network-Induced Delays through Parameter-Dependent Fuzzy SMC Approach

1The National Engineering Laboratory for Electric Vehicles and the Collaborative Innovation Center of Electric Vehicles in Beijing, School of Mechanical Engineering, Beijing Institute of Technology (BIT), Beijing 100081, China
2The Department of Multisource Propulsion System, Faculty of Automotive and Construction Machinery Engineering, Warsaw University of Technology (WUT), Narbutta 84, Warsaw 02-524, Poland

Correspondence should be addressed to Wanke Cao; nc.ude.tib@eknawoac

Received 25 August 2016; Revised 20 November 2016; Accepted 20 December 2016; Published 22 January 2017

Academic Editor: Quanmin Zhu

Copyright © 2017 Wanke Cao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Goodarzi and E. Esmailzadeh, “Design of a VDC system for all-wheel independent drive vehicles,” IEEE/ASME Transactions on Mechatronics, vol. 12, no. 6, pp. 632–639, 2007. View at Publisher · View at Google Scholar
  2. Z. Shuai, H. Zhang, J. Wang, J. Li, and M. Ouyang, “Combined AFS and DYC control of four-wheel-independent-drive electric vehicles over CAN Network with time-varying delays,” IEEE Transactions on Vehicular Technology, vol. 63, no. 2, pp. 591–602, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. H. Shen, Y. Gao, and T. Xu, “Multi-axle vehicle dynamics stability control algorithm with all independent drive wheel,” International Journal of Automotive Technology, vol. 17, no. 5, pp. 795–805, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. L. De Novellis, A. Sorniotti, P. Gruber et al., “Direct yaw moment control actuated through electric drivetrains and friction brakes: theoretical design and experimental assessment,” Mechatronics, vol. 26, pp. 1–15, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Wang, C. Hu, F. Yan, and M. Chadli, “Composite nonlinear feedback control for path following of four-wheel independently actuated autonomous ground vehicles,” IEEE Transactions on Intelligent Transportation Systems, vol. 17, no. 7, pp. 2063–2074, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. L. Xiong, G. W. Teng, Z. P. Yu, W. X. Zhang, and Y. Feng, “Novel stability control strategy for distributed drive electric vehicle based on driver operation intention,” International Journal of Automotive Technology, vol. 17, no. 4, pp. 651–663, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Qin and J. Zou, “H control of four-wheel-independent-drive electric vehicles with random time-varying delays,” Mathematical Problems in Engineering, vol. 2015, Article ID 245493, 10 pages, 2015. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  8. R. Wang and J. Wang, “Fault-tolerant control with active fault diagnosis for four-wheel independently driven electric ground vehicles,” IEEE Transactions on Vehicular Technology, vol. 60, no. 9, pp. 4276–4287, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Shuai, H. Zhang, J. Wang, J. Li, and M. Ouyang, “Lateral motion control for four-wheel-independent-drive electric vehicles using optimal torque allocation and dynamic message priority scheduling,” Control Engineering Practice, vol. 24, no. 1, pp. 55–66, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Zhu, H. Zhang, J. Wang, and Z. Fang, “Robust lateral motion control of electric ground vehicles with random network-induced delays,” IEEE Transactions on Vehicular Technology, vol. 64, no. 11, pp. 4985–4995, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Alipour, M. Sabahi, and M. B. B. Sharifian, “Lateral stabilization of a four wheel independent drive electric vehicle on slippery roads,” Mechatronics, vol. 30, pp. 275–285, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Hori, Y. Toyoda, and Y. Tsuruoka, “Traction control of electric vehicle: basic experimental results using the test EV ‘UOT electric march’,” IEEE Transactions on Industry Applications, vol. 34, no. 5, pp. 1131–1138, 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. S.-I. Sakai, H. Sado, and Y. Hori, “Motion control in an electric vehicle with four independently driven in-wheel motors,” IEEE/ASME Transactions on Mechatronics, vol. 4, no. 1, pp. 9–16, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Li, S. Du, and F. Yu, “Integrated vehicle chassis control based on direct yaw moment, active steering and active stabiliser,” Vehicle System Dynamics, vol. 46, no. 1, pp. 341–351, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Wang and R. G. Longoria, “Coordinated and reconfigurable vehicle dynamics control,” IEEE Transactions on Control Systems Technology, vol. 17, no. 3, pp. 723–732, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. D. B. Ren, J. Y. Zhang, J. M. Zhang, and S. M. Cui, “Trajectory planning and yaw rate tracking control for lane changing of intelligent vehicle on curved road,” Science China Technological Sciences, vol. 54, no. 3, pp. 630–642, 2011. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  17. P. Song, C.-F. Zong, and M. Tomizuka, “A terminal sliding mode based torque distribution control for an individual-wheel-drive vehicle,” Journal of Zhejiang University: Science A, vol. 15, no. 9, pp. 681–693, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. W. Gao, Y. Wang, and A. Homaifa, “Discrete-time variable structure control systems,” IEEE Transactions on Industrial Electronics, vol. 42, no. 2, pp. 117–122, 1995. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Z. Sarpturk, Y. Istefanopulos, and O. Kaynak, “On the stability of discrete-time sliding mode control systems,” IEEE Transactions on Automatic Control, vol. 32, pp. 930–932, 1987. View at Google Scholar
  20. M.-S. Chen, Y.-R. Hwang, and M. Tomizuka, “A state-dependent boundary layer design for sliding mode control,” Institute of Electrical and Electronics Engineers. Transactions on Automatic Control, vol. 47, no. 10, pp. 1677–1681, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  21. B. L. Boada, M. J. L. Boada, and V. Díaz, “Fuzzy-logic applied to yaw moment control for vehicle stability,” Vehicle System Dynamics, vol. 43, no. 10, pp. 753–770, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. C. F. Caruntu, M. Lazar, R. H. Gielen, P. P. J. van den Bosch, and S. Di Cairano, “Lyapunov based predictive control of vehicle drivetrains over CAN,” Control Engineering Practice, vol. 21, no. 12, pp. 1884–1898, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. N. Yagiz, Y. Hacioglu, and Y. Taskin, “Fuzzy sliding-mode control of active suspensions,” IEEE Transactions on Industrial Electronics, vol. 55, no. 11, pp. 3883–3890, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Herpel, K.-S. Hielscher, U. Klehmet, and R. German, “Stochastic and deterministic performance evaluation of automotive CAN communication,” Computer Networks, vol. 53, no. 8, pp. 1171–1185, 2009. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus