Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2017, Article ID 6023809, 13 pages
https://doi.org/10.1155/2017/6023809
Research Article

Disc Brake Vibration Model Based on Stribeck Effect and Its Characteristics under Different Braking Conditions

College of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China

Correspondence should be addressed to Shugen Hu; nc.ude.ujz@jdgsh

Received 9 March 2017; Revised 17 April 2017; Accepted 23 April 2017; Published 28 May 2017

Academic Editor: Oleg V. Gendelman

Copyright © 2017 Shugen Hu and Yucheng Liu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Liu, H. Zheng, C. Cai et al., “Analysis of disc brake squeal using the complex eigenvalue method,” Applied Acoustics, vol. 68, no. 6, pp. 603–615, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. J. G. P. da Silva, E. R. Fulco, P. E. D. Varante, V. Do Nascimento, F. N. Diesel, and D. L. Boniatti, “Numerical and experimental evaluation of brake squeal,” SAE Technical Papers 2013-36-0030, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Belhocine and N. M. Ghazaly, “Effects of material properties on generation of brake squeal noise using finite element method,” Latin American Journal of Solids and Structures, vol. 12, no. 8, pp. 1432–1447, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Papinniemi, J. C. S. Lai, J. Zhao, and L. Loader, “Brake squeal: a literature review,” Applied Acoustics, vol. 63, no. 4, pp. 391–400, 2002. View at Publisher · View at Google Scholar · View at Scopus
  5. L. T. Matozo, A. Tamagna, H. A. Al-Qureshi, A. R. Menetrier, and P. E. Varante, “Investigation of the relation between friction material abrasive properties and the squeal noise tendency in automotive disc brake systems,” International Journal of Acoustics and Vibrations, vol. 17, no. 4, pp. 200–203, 2012. View at Google Scholar · View at Scopus
  6. S.-K. Yang, Z. Sun, Y.-J. Liu, B.-W. Lu, T. Liu, and H.-S. Hou, “Automotive brake squeal simulation and optimization,” SAE Technical Paper 2016-01-1298, 2016. View at Google Scholar
  7. F. Chen, “Disc brake squeal: an overview,” SAE Technical Papers 2007-01-0587, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Kang, “Finite element modeling for stick-slip pattern of squeal modes in disc brake,” Journal of Mechanical Science and Technology, vol. 28, no. 10, pp. 4021–4026, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Hegde and B.-S. Suresh, “Study of friction induced stick-slip phenomenon in a minimal disc brake model,” Journal of Mechanical Engineering and Automation, vol. 5, pp. 100–106, 2015. View at Google Scholar
  10. C.-Y. Teoh and Z.-M. Ripin, “Transient analysis of drum brake squeal with binary flutter and negative friction-velocity instability mechanisms,” Journal of Vibroengineering, vol. 13, no. 2, pp. 275–287, 2011. View at Google Scholar
  11. T. Nakae, T. Ryu, A. Sueoka, Y. Nakano, and T. Inoue, “Squeal and chatter phenomena generated in a mountain bike disc brake,” Journal of Sound and Vibration, vol. 330, no. 10, pp. 2138–2149, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. A. R. AbuBakar and H. Ouyang, “A prediction methodology of disk brake squeal using complex eigenvalue analysis,” International Journal of Vehicle Design, vol. 46, no. 4, pp. 416–435, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. N.-P. Hoffmann and L. Gaul, “Friction induced vibrations of brakes: research fields and activities,” SAE Technical Papers 2008-01-2579, 2008. View at Google Scholar · View at Scopus
  14. N. M. Kinkaid, O. M. O'Reilly, and P. Papadopoulos, “Automotive disc brake squeal,” Journal of Sound and Vibration, vol. 267, no. 1, pp. 105–166, 2003. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Chen, M.-K. Abdelhamid, P. Blaschke, and J. Swayze, “On automotive disc brake squeal part III test and evaluation,” SAE Technical Papers 2003-01-1622, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Shin, M. J. Brennan, J.-E. Oh, and C. J. Harris, “Analysis of disc brake noise using a two-degree-of-freedom model,” Journal of Sound and Vibration, vol. 254, no. 5, pp. 837–848, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. F.-H. Yang, W. Zhang, and J. Wang, “Sliding bifurcations and chaos induced by dry friction in a braking system,” Chaos, Solitons & Fractals, vol. 40, no. 3, pp. 1060–1075, 2009. View at Publisher · View at Google Scholar · View at MathSciNet
  18. M. Paliwal, A. Mahajan, J. Don, T. Chu, and P. Filip, “Noise and vibration analysis of a disc-brake system using a stick-slip friction model involving coupling stiffness,” Journal of Sound and Vibration, vol. 282, no. 3-5, pp. 1273–1284, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. N.-M. Kinkaid, O.-M. OReilly, and P. Papadopoulos, “On the transient dynamics of a multi-degree-of-freedom friction oscillator: a new mechanism for disc brake noise,” Journal of sound and vibration, vol. 287, no. 4, pp. 901–917, 2005. View at Google Scholar
  20. I. Ahmed, “Analysis of ventilated disc brake squeal using a 10 dof model,” SAE Technical Papers 2012-01-1827, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Wang, X. Liu, Y. Shan, and T. He, “Nonlinear behavior evolution and squeal analysis of disc brake based on different friction models,” Journal of Vibroengineering, vol. 16, no. 5, pp. 2593–2609, 2014. View at Google Scholar · View at Scopus
  22. R. Stribeck, “The key qualities of sliding and roller bearings,” Zeitschrift des Vereines Seutscher Ingenieure, vol. 46, no. 38, pp. 1342–1348, 1902. View at Google Scholar
  23. L.-C. Bo and D. Pavelescu, “The friction-speed relation and its influence on the critical velocity of stick-slip motion,” Wear, vol. 82, no. 3, pp. 277–289, 1982. View at Google Scholar
  24. A. Tustin, “The effects of backlash and of speed-dependent friction on the stability of closed-cycle control systems,” Journal of the Institution of Electrical Engineers—Part IIA: Automatic Regulators and Servo Mechanisms, vol. 94, no. 1, pp. 143–151, 1947. View at Publisher · View at Google Scholar
  25. B. Armstrong-Hélouvry, “Stick-slip arising from Stribeck friction,” in Proceedings of the IEEE International Conference on Robotics and Automation, pp. 1377–1382, IEEE, Cincinnati, Ohio, USA, May 1990. View at Scopus