Research Article
Tolerance Analysis of Over-Constrained Assembly Considering Gravity Influence: Constraints of Multiple Planar Hole-Pin-Hole Pairs
Table 1
Output results of experiments for Case
1.
| Output result | K1 | K2 | K3 |
| Probability of quality feasibility (Pq) | 80.22% | DFP | Mean(mm) | -0.0208 | -0.0235 | -0.0243 | Standard deviation(mm) | 0.0267 | 0.0255 | 0.0250 | DFP_QR | Mean(mm) | -0.0177 | -0.0204 | -0.0213 | Standard deviation(mm) | 0.0242 | 0.0231 | 0.0227 |
|
|