Research Article
Tolerance Analysis of Over-Constrained Assembly Considering Gravity Influence: Constraints of Multiple Planar Hole-Pin-Hole Pairs
Table 2
Output results of experiments for Case
2.
| | Output result | X | Y |
| | Probability of quality feasibility (Pq) | 82.62% | | DFP | Mean(mm) | -0.0010 | -0.0402 | | Standard deviation(mm) | 0.0261 | 0.0263 | | DFP_QR | Mean(mm) | -0.0010 | -0.0400 | | Standard deviation(mm) | 0.0262 | 0.0261 |
|
|
