Tolerance Analysis of Over-Constrained Assembly Considering Gravity Influence: Constraints of Multiple Planar Hole-Pin-Hole Pairs

Table 6

Output results of EX0, EX1, and EX2 for Case 2.

Output result			EX0	EX1	EX2
probability of assembly feasibility (Pa)			82.88%
probability of quality feasibility (Pq)			82.61%	82.87%	82.38%
DFP	Mean(mm)	X	0.000	0.000	0.000
		Y	-0.040	0.000	0.000
	Standard deviation(mm)	X	0.026	0.021	0.025
		Y	0.026	0.021	0.058
DFP_QR	Mean(mm)	X	0.000	0.000	0.000
		Y	-0.040	0.000	0.000
	Standard deviation(mm)	X	0.026	0.021	0.025
		Y	0.026	0.021	0.058