Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 2685709, 13 pages
https://doi.org/10.1155/2018/2685709
Research Article

DEM Investigation of Particle-Scale Mechanical Properties of Frozen Soil Based on the Nonlinear Microcontact Model Incorporating Rolling Resistance

1School of Civil Engineering, Harbin Institute of Technology, Heilongjiang, Harbin 150090, China
2Institute of Engineering Mechanics, China Earthquake Administration, Heilongjiang, Harbin 150080, China
3School of Transportation Science and Engineering, Harbin Institute of Technology, Heilongjiang, Harbin 150090, China

Correspondence should be addressed to Lingshi An; moc.361@ihsgnilnave

Received 28 August 2017; Revised 27 December 2017; Accepted 3 January 2018; Published 5 February 2018

Academic Editor: Antonio Bilotta

Copyright © 2018 Lingshi An et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Ling, Q. Li, L. Wang, F. Zhang, L. An, and P. Xu, “Stiffness and damping radio evolution of frozen clays under long-term low-level repeated cyclic loading: experimental evidence and evolution model,” Cold Regions Science and Technology, vol. 86, pp. 45–54, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Abdelkrim, G. Bonnet, and P. de Buhan, “A computational procedure for predicting the long term residual settlement of a platform induced by repeated traffic loading,” Computers & Geosciences, vol. 30, no. 6, pp. 463–476, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. D. Wang, W. Ma, and X. Chang, “Analyses of behavior of stress-strain of frozen Lanzhou loess subjected to consolidation,” Cold Regions Science and Technology, vol. 40, no. 1-2, pp. 19–29, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Yang, Y. Lai, Y. Dong, and S. Li, “The strength criterion and elastoplastic constitutive model of frozen soil under high confining pressures,” Cold Regions Science and Technology, vol. 60, no. 2, pp. 154–160, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. X. Xu, Y. Lai, Y. Dong, and J. Qi, “Laboratory investigation on strength and deformation characteristics of ice-saturated frozen sandy soil,” Cold Regions Science and Technology, vol. 69, no. 1, pp. 98–104, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. M. Lai, Z. H. Gao, and S. J. Zhang, “Stress-strain relationships and nonlinear Mohr strength criterion of frozen sand clay,” Chinese Journal of Rock Mechanics and Engineering, vol. 50, pp. 45–53, 2007. View at Google Scholar
  7. T. Eskişar, S. Altun, and I. Kalipcilar, “Assessment of strength development and freeze-thaw performance of cement treated clays at different water contents,” Cold Regions Science and Technology, vol. 111, pp. 50–59, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. R. M. Holt, J. Kjølaas, I. Larsen, L. Li, A. Gotusso Pillitteri, and E. F. Sønstebø, “Comparison between controlled laboratory experiments and discrete particle simulations of the mechanical behaviour of rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 42, no. 7-8, pp. 985–995, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. Q. Li, X. Ling, and D. Sheng, “Elasto-plastic behaviour of frozen soil subjected to long-term low-level repeated loading, part II: constitutive modelling,” Cold Regions Science and Technology, vol. 122, pp. 58–70, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. Q. Li, X. Ling, and D. Sheng, “Elasto-plastic behaviour of frozen soil subjected to long-term low-level repeated loading, Part I: experimental investigation,” Cold Regions Science and Technology, vol. 125, pp. 138–151, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. L. An, X. Ling, M. Wang, Q. Li, F. Zhang, and L. Wang, “Dynamic parameters of silt subjected to train loading in seasonal frozen region,” Electronic Journal of Geotechnical Engineering, vol. 20, no. 28, pp. 13375–13392, 2015. View at Google Scholar · View at Scopus
  12. T. S. Vinson, T. Chaichanavong, and R. L. Czajkowski, “Behavior of frozen clay under cyclic axial loading,” Journal of the Geotechnical Engineering Division, vol. 104, no. 7, pp. 779–800, 1978. View at Google Scholar · View at Scopus
  13. X. Z. Ling, F. Zhang, Q. L. Li, L. S. An, and J. H. Wang, “Dynamic shear modulus and damping ratio of frozen compacted sand subjected to freeze-thaw cycle under multi-stage cyclic loading,” Soil Dynamics and Earthquake Engineering, vol. 76, pp. 111–121, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Shen and J. Zhang, “Dynamic strength characteristics and failure criterion of frozen silt,” Journal of Glaciolgy and Geocryology, vol. 19, pp. 141–148, 1997. View at Google Scholar
  15. L. U. Arenson, M. M. Johansen, and S. M. Springman, “Effects of volumetric ice content and strain rate on shear strength under triaxial conditions for frozen soil samples,” Permafrost and Periglacial Processes, vol. 15, no. 3, pp. 261–271, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. M. Lai, J. B. Li, and Q. Z. Li, “Study on damage statistical constitutive model and stochastic simulation for warm ice-rich frozen silt,” Cold Regions Science and Technology, vol. 71, pp. 102–110, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. Z.-H. Gao, Y.-M. Lai, E.-G. Xiong, and B. Li, “Experimental study of characteristics of warm and ice-rich frozen clay under cyclic loading,” Yantu Lixue/Rock and Soil Mechanics, vol. 31, no. 6, pp. 1744–1751, 2010. View at Google Scholar · View at Scopus
  18. Q.-L. Li, X.-Z. Ling, L.-N. Wang, F. Zhang, J.-H. Wang, and P.-J. Xu, “accumulative strain of clays in cold region under long-term low-level repeated cyclic loading: experimental evidence and accumulation model,” Cold Regions Science and Technology, vol. 94, pp. 45–52, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. Yang, Y. Lai, and X. Chang, “Experimental and theoretical studies on the creep behavior of warm ice-rich frozen sand,” Cold Regions Science and Technology, vol. 63, no. 1-2, pp. 61–67, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. D. O. Potyondy and P. A. Cundall, “A bonded-particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 8, pp. 1329–1364, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Yoon, “Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 6, pp. 871–889, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Wang and F. Tonon, “Modeling Lac du Bonnet granite using a discrete element model,” International Journal of Rock Mechanics and Mining Sciences, vol. 46, no. 7, pp. 1124–1135, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Scholtès and F.-V. Donzé, “A DEM model for soft and hard rocks: role of grain interlocking on strength,” Journal of the Mechanics and Physics of Solids, vol. 61, no. 2, pp. 352–369, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Dondi, A. Simone, V. Vignali, and G. Manganelli, “Numerical and experimental study of granular mixes for asphalts,” Powder Technology, vol. 232, pp. 31–40, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. N. M. Tropin, A. V. Manakov, and O. B. Bocharov, “Implementation of boundary conditions in discrete element modeling of rock cutting under pressure,” Applied Mechanics and Materials, vol. 598, pp. 114–118, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Rojek, C. Labra, O. Su, and E. Oñate, “Comparative study of different discrete element models and evaluation of equivalent micromechanical parameters,” International Journal of Solids and Structures, vol. 49, no. 13, pp. 1497–1517, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. Q. Zhang, H. Zhu, L. Zhang, and X. Ding, “Study of scale effect on intact rock strength using particle flow modeling,” International Journal of Rock Mechanics and Mining Sciences, vol. 48, no. 8, pp. 1320–1328, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. J. M. Ting, B. T. Corkum, C. R. Kauffman, and C. Greco, “Discrete numerical model for soil mechanics,” Journal of Geotechnical Engineering, vol. 115, no. 3, pp. 379–398, 1989. View at Publisher · View at Google Scholar · View at Scopus
  29. S. Masson and J. Martinez, “Micromechanical analysis of the shear behavior of a granular material,” Journal of Engineering Mechanics, vol. 127, no. 10, pp. 1007–1016, 2001. View at Publisher · View at Google Scholar · View at Scopus
  30. C. Thornton and K. K. Yin, “Impact of elastic spheres with and without adhesion,” Powder Technology, vol. 65, no. 1-3, pp. 153–166, 1991. View at Publisher · View at Google Scholar · View at Scopus
  31. M. J. Jiang, H.-S. Yu, and D. Harris, “A novel discrete model for granular material incorporating rolling resistance,” Computers & Geosciences, vol. 32, no. 5, pp. 340–357, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. M. J. Jiang, H. S. Yu, and D. Harris, “Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 30, no. 8, pp. 723–761, 2006. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Jiang, Z. Shen, and J. Wang, “A novel three-dimensional contact model for granulates incorporating rolling and twisting resistances,” Computers & Geosciences, vol. 65, pp. 147–163, 2015. View at Publisher · View at Google Scholar · View at Scopus
  34. H.-H. Zhao, L.-T. Shao, and S.-Y. Ji, “Numerical simulation of triaxial test on the dense sand by DEM,” in Proceedings of the 2011 GeoHunan International Conference - Instrumentation, Testing, and Modeling of Soil and Rock Behavior, pp. 233–241, China, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. T.-T. Ng and R. Dobry, “Numerical simulations of monotonic and cyclic loading of granular soil,” Journal of Geotechnical Engineering, vol. 120, no. 2, pp. 388–403, 1994. View at Publisher · View at Google Scholar · View at Scopus
  36. E. S. Hosseininia, “Investigating the micromechanical evolutions within inherently anisotropic granular materials using discrete element method,” Granular Matter, vol. 14, no. 4, pp. 483–503, 2012. View at Publisher · View at Google Scholar · View at Scopus
  37. M. J. Jiang, H. B. Yan, H. H. Zhu, and S. Utili, “Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses,” Computers & Geosciences, vol. 38, no. 1, pp. 14–29, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. B. Zhou, R. Huang, and J. Wang, “Evolution of sand crushability and its effect on particle-scale energy allocation,” in Proceedings of the 7th International Conference on Micromechanics of Granular Media: Powders and Grains 2013, pp. 923–926, Australia, July 2013. View at Publisher · View at Google Scholar · View at Scopus
  39. M. A. Ismail, H. A. Joer, M. F. Randolph, and A. Meritt, “Cementation of porous materials using calcite,” Géotechnique, vol. 52, no. 5, pp. 313–324, 2002. View at Publisher · View at Google Scholar
  40. L. S. An, X. Z. Ling, and Y. C. Geng, “Dynamic and Static Mechanical Properties of Ice-Rich Frozen Sand,” Electronic Journal of Geotechnical Engineering, vol. 22, pp. 1325–1344, 2017. View at Google Scholar