Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 3080173, 11 pages
https://doi.org/10.1155/2018/3080173
Research Article

A New Equivalent Statistical Damage Constitutive Model on Rock Block Mixed Up with Fluid Inclusions

State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact, National Defense Engineering College, Army Engineering University of PLA, Nanjing 210000, China

Correspondence should be addressed to Hongfa Xu; moc.anis@1afgnohux

Received 31 October 2017; Revised 3 January 2018; Accepted 9 January 2018; Published 18 March 2018

Academic Editor: Michele Brun

Copyright © 2018 Xiao Chen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Vervoot, M. Wevers, R. Swennen et al., “Recent advances of X-ray CT and its application for rock material,” in Proceedings of the X-ray CT for Geomaterials; Soils, Concrete, Rocks, 2004.
  2. L. Du, X. Zhang, J. Niu, X. Wang, and G. Feng, “The seismic CT method in measuring rock bodies,” Applied Geophysics, vol. 3, no. 3, pp. 192–195, 2006. View at Publisher · View at Google Scholar
  3. D. Crandall, G. Bromhal, and D. H. Smith, “Conversion of a micro-CT scanned rock fracture into a useful model,” in Proceedings of the 2009 ASME Fluids Engineering Division Summer Conference, FEDSM2009, pp. 2101–2108, USA, August 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Sato and T. Mukunoki, “Fundamental Knowledge of X-ray CT and Its Application to Rock Engineering,” Journal of MMIJ, vol. 131, no. 6, pp. 277–284, 2015. View at Publisher · View at Google Scholar
  5. G. Molli, G. Cortecci, L. Vaselli et al., “Fault zone structure and fluid-rock interaction of a high angle normal fault in Carrara marble (NW Tuscany, Italy),” Journal of Structural Geology, vol. 32, no. 9, pp. 1334–1348, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. B. E. Treeby and B. T. Cox, “k-Wave: MATLAB toolbox for the simulation and reconstruction of photoacoustic wave fields,” Journal of Biomedical Optics, vol. 15, no. 2, Article ID 021314, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Klemd, “High-pressure fluid-rock interaction as the cause of bulk rock compositional changes in blueschists and eclogites,” Egu General Assembly, vol. 14, no. 3980, 2012. View at Google Scholar
  8. X. Zhuang, R. Huang, C. Liang, and T. Rabczuk, “A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage,” Mathematical Problems in Engineering, vol. 2014, Article ID 179169, 11 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. C. I. Steefel and K. Mäher, “Fluid-rock interaction: A reactive transport approach,” Reviews in Mineralogy and Geochemistry, vol. 70, no. 1, pp. 485–532, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Gassmann, “Elastic waves through a packing of spheres,” Geophysics, vol. 16, no. 4, pp. 673–685, 1951. View at Publisher · View at Google Scholar
  11. B. H. Russell, K. Hedlin, F. J. Hilterman, and L. R. Lines, “Fluid-property discrimination with AVO: A Biot-Gassmann perspective,” Geophysics, vol. 68, no. 1, pp. 29–39, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. J. M. Carcione, B. Gurevich, and F. Cavallini, “A generalized Biot-Gassmann model for the acoustic properties of shaley sandstones,” Geophysical Prospecting, vol. 48, no. 3, pp. 539–557, 2000. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Hou, C. Guo, and J. Wang, “Using Gassmann Equation Predict Marine Sediment Porosity,” Earth Science, 2016. View at Google Scholar
  14. J.-Y. Li, “Gas reservoir identification by seismic AVO attributes on fluid substitution,” Applied Geophysics, vol. 9, no. 2, pp. 139–148, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. N. Tisato, C. Madonna, and S. Boutareaud, “A new instrumentation to measure seismic waves attenuation,” in Proceedings of the AGU Fall Meeting, 2010, AGU Fall Meeting Abstracts.
  16. T. K. Tan, “On the locked in stress, creep and dilataion of rocks and the constitutive equations,” Chinese Journal of Rock Mechanics Engineering, 1991. View at Google Scholar
  17. L. Barrows, “Locked-in stress in viscoelastic Earth materials,” Eos, Transactions, American Geophysical Union, vol. 78, no. 24, p. 248, 1997. View at Publisher · View at Google Scholar
  18. S. Wang, “Geological nature of rock and its deduction for rock mechanics,” Chinese Journal of Rock Mechanics and Engineering, vol. 28, no. 3, pp. 433–450, 2009. View at Google Scholar · View at Scopus
  19. Z. Q. Yue, “Gas inclusion and their expansion power as foundation of rock locked in stress hypothesis,” Journal of Engineering Geology, vol. 22, no. 4, pp. 739–756, 2014. View at Google Scholar
  20. Z. Q. Yue, “On nature of earthquakes with cause of compressed methane gas expansion and migration in crustal rocks,” in Proceedings of the 5th Biot Conference on Poromechanics, BIOT 2013, pp. 507–516, Austria, July 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Q. Yue, “On cause hypotheses of earthquakes with external tectonic plate and/or internal dense gas loadings,” Acta Mechanica, vol. 225, no. 4-5, pp. 1447–1469, 2014. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  22. J. Lemaitre, “A continuous damage mechanics model for ductile fracture,” Journal of Engineering Materials and Technology, vol. 107, no. 1, pp. 83–89, 1985. View at Publisher · View at Google Scholar · View at Scopus
  23. J. A. Lemaitre, “How to use damage mechanics,” Nuclear Engineering and Design, vol. 80, no. 2, pp. 233–245, 1984. View at Publisher · View at Google Scholar · View at Scopus
  24. W. Cao, M. Zhao, and C. Liu, “Study on the model and its modifying method for rock softening and damage based on Weibull random distribution,” Chinese Journal of Rock Mechanics and Engineering, vol. 23, no. 19, pp. 3226–3231, 2004. View at Google Scholar · View at Scopus
  25. W.-G. Cao and X. Li, “A new discussion on damage softening statistical constitutive model for rocks and method for determining its parameters,” Rock and Soil Mechanics, vol. 29, no. 11, pp. 2952–2956, 2008. View at Google Scholar · View at Scopus
  26. H. Xu, X. Chen, L. Dong, and Y. Yang, “Equivalent Elastic Constants of Rock Containing Pore Fluid Inclusions,” Journal of Basic Science and Engineering, vol. 25, no. 2, pp. 369–381, 2017. View at Publisher · View at Google Scholar · View at Scopus
  27. Z. F. Khisaeva and M. Ostoja-Starzewski, “On the size of RVE in finite elasticity of random composites,” Journal of Elasticity, vol. 85, no. 2, pp. 153–173, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. S. I. Ranganathan and M. Ostoja-Starzewski, “Scaling function, anisotropy and the size of RVE in elastic random polycrystals,” Journal of the Mechanics and Physics of Solids, vol. 56, no. 9, pp. 2773–2791, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Ostoja-Starzewski, X. Du, Z. F. Khisaeva, and W. Li, “Comparisons of the size of the representative volume element in elastic, plastic, thermoelastic, and permeable random microstructures,” International Journal for Multiscale Computational Engineering, vol. 5, no. 2, pp. 73–82, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Ramazani, K. Mukherjee, H. Quade, U. Prahl, and W. Bleck, “Correlation between 2D and 3D flow curve modelling of DP steels using a microstructure-based RVE approach,” Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing, vol. 560, pp. 129–139, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. R. Pucha, “RVE-based design and analysis tools for composite materials with nanofillers,” Journal of Composite Materials, 2013. View at Google Scholar
  32. M. B. Wold, L. D. Connell, and S. K. Choi, “The role of spatial variability in coal seam parameters on gas outburst behaviour during coal mining,” International Journal of Coal Geology, vol. 75, no. 1, pp. 1–14, 2008. View at Publisher · View at Google Scholar · View at Scopus
  33. I. L. Chuanliang and S. Zhu, “Compressibility coefficients of bulk volume and fluid-solid of rocks,” Lithologic Reservoirs, vol. 27, no. 2, pp. 1–5, 2015. View at Google Scholar
  34. W. Murphy, A. Reischer, and H. Kai, “Modulus decomposition of compressional and shear velocities in sand bodies,” Geophysics, vol. 58, no. 2, pp. 227–239, 1993. View at Publisher · View at Google Scholar · View at Scopus
  35. Q. G. Liu and T. D. Tan, “Identifying lithological characteristics and the type of pore fluid in line of elastic moduli,” Geophysical Prospecting for Petroleum, vol. 32, no. 2, pp. 88–96, 1993. View at Google Scholar
  36. X. W. Qiao and S. W. Yan, “Evaluation of the characteristics of pore fluids in permeable formations using acoustic logging date,” WLT, vol. 21, no. 3, pp. 61–66, 1997. View at Google Scholar
  37. K. Huang, Z. Q. Xu, and H. X. Yang, “The relationship between P- and S- wave velocity ratio, modulus of elasticity and fluids contained in rocks,” XJPG, vol. 19, no. 5, pp. 20–22+85, 1998. View at Google Scholar
  38. Q. Liu, R. Y. Lu, and X. Z. Li, “The Effect of the Pore Water Pressure on the Rock Mechanics Parameters,” Acta Geoscientia Sinica, vol. 29, no. 5, pp. 660–664, 2008. View at Google Scholar
  39. J. D. Eshelby, “The determination of the elastic field of an ellipsoidal inclusion, and related problems,” Proceedings of the Royal Society London A: Mathematical, Physical and Engineering Sciences, vol. 241, pp. 376–396, 1957. View at Publisher · View at Google Scholar · View at MathSciNet
  40. G. J. Rodin, “Eshelby's inclusion problem for polygons and polyhedra,” Journal of the Mechanics and Physics of Solids, vol. 44, no. 12, pp. 1977–1995, 1996. View at Publisher · View at Google Scholar · View at Scopus
  41. C. Q. Ru, “Eshelby's problem for two-dimensional piezoelectric inclusions of arbitrary shape,” Proceedings of the Royal Society A Mathematical, Physical and Engineering Sciences, vol. 456, no. 1997, pp. 1051–1068, 2000. View at Publisher · View at Google Scholar · View at Scopus
  42. W. Zou, “Limitation of average eshelby tensor and its application in analysis of ellipse approximation,” Acta Mechanica Solida Sinica, vol. 24, no. 2, pp. 176–184, 2011. View at Publisher · View at Google Scholar · View at Scopus
  43. M. Kawashita and H. Nozaki, “Eshelby tensor of a polygonal inclusion and its special properties,” Journal of Elasticity: The Physical and Mathematical Science of Solids, vol. 64, no. 1, pp. 71–84, 2001. View at Google Scholar · View at MathSciNet
  44. T. Mori and K. Tanaka, “Average stress in matrix and average elastic energy of materials with misfitting inclusions,” Acta Metallurgica et Materialia, vol. 21, no. 5, pp. 571–574, 1973. View at Publisher · View at Google Scholar · View at Scopus
  45. A. Giraud, Q. V. Huynh, D. Hoxha, and D. Kondo, “Application of results on Eshelby tensor to the determination of effective poroelastic properties of anisotropic rocks-like composites,” International Journal of Solids and Structures, vol. 44, no. 11-12, pp. 3756–3772, 2007. View at Publisher · View at Google Scholar · View at Scopus
  46. M. Hu, G.-Y. Xu, and S.-B. Hu, “Study of equivalent elastic modulus of sand gravel soil with Eshelby tensor and Mori-Tanaka equivalent method,” Rock and Soil Mechanics, vol. 34, no. 5, pp. 1437–1448, 2013. View at Google Scholar · View at Scopus
  47. H. Ma, C. Yan, and Q.-H. Qin, “Eigenstrain boundary integral equations with local Eshelby matrix for stress analysis of ellipsoidal particles,” Mathematical Problems in Engineering, vol. 2014, Article ID 947205, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  48. Z. Chao, H. Wang, W. Xu, L. Yang, and K. Zhao, “Variation of permeability and porosity of sandstones with different degrees of saturation under stresses,” Chinese Journal of Rock Mechanics and Engineering, vol. 36, no. 3, pp. 665–680, 2017. View at Publisher · View at Google Scholar · View at Scopus
  49. H. Wang, W. Xu, J. Zuo, J. Shao, and C. Jia, “Evolution law of the permeability and porosity for low-permeability rock based on gas permeability test,” Journal of Hydraulic Engineering, vol. 46, no. 2, pp. 208–216, 2015. View at Publisher · View at Google Scholar · View at Scopus
  50. H. W. Zhou, P. Wu, and R. Q. Yang, “Damage model of jointed rock mass,” Recent Advances in Rock Mechanics, 1989. View at Google Scholar
  51. H. W. Yang, Study on Coupling Mechanism of Rock and Pore Water under Cyclic Loading, University of Chongqing, 2011.
  52. W. Wei, Z. Tian, and Q. Zhu, “Study of statistical damage constitutive model for rock considering pore water pressure,” Chinese Journal of Rock Mechanics Engineering, 2015. View at Google Scholar