Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 3081078, 11 pages
https://doi.org/10.1155/2018/3081078
Research Article

Solution of the Nonlinear High-Fidelity Generalized Method of Cells Micromechanics Relations via Order-Reduction Techniques

1Department of Aerospace Engineering, Mississippi State University, P.O. Box A, Mississippi State, MS 39762, USA
2Multiscale and Multiphysics Modeling Branch, Materials and Structures Division, NASA Glenn Research Center, 21000 Brookpark Rd., MS 49-7, Cleveland, OH 44135, USA
3BAM Federal Institute for Material Research and Testing, Unter den Eichen 87, 12205 Berlin, Germany

Correspondence should be addressed to Trenton M. Ricks; vog.asan@skcir.m.notnert

Received 17 November 2017; Accepted 29 January 2018; Published 28 February 2018

Academic Editor: Jose Merodio

Copyright © 2018 Trenton M. Ricks et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Aboudi, S. M. Arnold, and B. A. Bednarcyk, Micromechanics of composite materials: A generalized multiscale analysis approach, Butterworth-Heinemann, Oxford, UK, 2012.
  2. Y. C. Liang, H. P. Lee, S. P. Lim, W. Z. Lin, K. H. Lee, and C. G. Wu, “Proper orthogonal decomposition and its applications. I. Theory,” Journal of Sound and Vibration, vol. 252, no. 3, pp. 527–544, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  3. A. Chatterjee, “An introduction to the proper orthogonal decomposition,” Current Science, vol. 78, no. 7, pp. 808–817, 2000. View at Google Scholar · View at Scopus
  4. F. Chinesta, P. Ladeveze, and E. Cueto, “A Short Review on Model Order Reduction Based on Proper Generalized Decomposition,” Archives of Computational Methods in Engineering: State-of-the-Art Reviews, vol. 18, no. 4, pp. 395–404, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Chinesta, A. Ammar, and E. a. Cueto, “Recent advances and new challenges in the use of the proper generalized decomposition for solving multidimensional models,” Archives of Computational Methods in Engineerin: State-of-the-Art Reviews, vol. 17, no. 4, pp. 327–350, 2010. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  6. K. Carlberg, C. Bou-Mosleh, and C. Farhat, “Efficient non-linear model reduction via a least-squares Petrov-Galerkin projection and compressive tensor approximations,” International Journal for Numerical Methods in Engineering, vol. 86, no. 2, pp. 155–181, 2011. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  7. G. Berkooz, P. Holmes, and J. L. Lumley, “The proper orthogonal decomposition in the analysis of turbulent flows,” Annual Review of Fluid Mechanics, vol. 25, no. 1, pp. 539–575, 1993. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Kunisch and S. Volkwein, “Galerkin proper orthogonal decomposition methods for a general equation in fluid dynamics,” SIAM Journal on Numerical Analysis, vol. 40, no. 2, pp. 492–515, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  9. S. S. Ravindran, “A reduced-order approach for optimal control of fluids using proper orthogonal decomposition,” International Journal for Numerical Methods in Fluids, vol. 34, no. 5, pp. 425–448, 2000. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  10. A. Radermacher, B. A. Bednarcyk, B. Stier, J. Simon, L. Zhou, and S. Reese, “Displacement-based multiscale modeling of fiber-reinforced composites by means of proper orthogonal decomposition,” Advanced Modeling and Simulation in Engineering Sciences, vol. 3, no. 1, 2016. View at Publisher · View at Google Scholar
  11. A. Radermacher, S. Reese, and A. M. Hadoush, “Selective proper orthogonal decomposition model reduction for forming simulations,” PAMM, vol. 13, no. 1, pp. 115-116, 2013. View at Publisher · View at Google Scholar
  12. J. A. Hernández, J. Oliver, A. E. Huespe, M. A. Caicedo, and J. C. Cante, “High-performance model reduction techniques in computational multiscale homogenization,” Computer Methods Applied Mechanics and Engineering, vol. 276, pp. 149–189, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  13. J. Yvonnet and Q.-C. He, “The reduced model multiscale method (R3M) for the non-linear homogenization of hyperelastic media at finite strains,” Journal of Computational Physics, vol. 223, no. 1, pp. 341–368, 2007. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  14. P. Kerfriden, P. Gosselet, S. Adhikari, and S. P. A. Bordas, “Bridging proper orthogonal decomposition methods and augmented Newton-Krylov algorithms: an adaptive model order reduction for highly nonlinear mechanical problems,” Computer Methods Applied Mechanics and Engineering, vol. 200, no. 5-8, pp. 850–866, 2011. View at Publisher · View at Google Scholar · View at MathSciNet
  15. F. Feyel, “A multilevel finite element method (FE2) to describe the response of highly non-linear structures using generalized continua,” Computer Methods Applied Mechanics and Engineering, vol. 192, no. 28-30, pp. 3233–3244, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. F. Feyel and J.-L. Chaboche, “FE 2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre SiC/Ti composite materials,” Computer Methods Applied Mechanics and Engineering, vol. 183, no. 3-4, pp. 309–330, 2000. View at Publisher · View at Google Scholar · View at Scopus
  17. T. M. Ricks, T. E. Lacy, E. J. Pineda, B. A. Bednarcyk, and S. M. Arnold, “Computationally efficient High-Fidelity Generalized Method of Cells micromechanics via order-reduction techniques,” Composite Structures, vol. 156, pp. 2–9, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. D. Ryckelynck, “A priori hyperreduction method: An adaptive approach,” Journal of Computational Physics, vol. 202, no. 1, pp. 346–366, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Chaturantabut and D. C. Sorensen, “Nonlinear model reduction via discrete empirical interpolation,” SIAM Journal on Scientific Computing, vol. 32, no. 5, pp. 2737–2764, 2010. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  20. R. Everson and L. Sirovich, “Karhunen–loève procedure for gappy data,” Journal of the Optical Society of America A: Optics and Image Science, and Vision, vol. 12, no. 8, pp. 1657–1667, 1995. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Bui-Thanh, M. Damodaran, and K. Willcox, “Aerodynamic data reconstruction and inverse design using proper orthogonal decomposition,” AIAA Journal, vol. 42, no. 8, pp. 1505–1516, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Bensoussan, J.-L. Lions, and G. Papanicolaou, Asymptotic Analysis for Periodic Structures, North-Holland, 1978. View at MathSciNet
  23. N. Bakhvalov and G. Panasenko, Homogenisation: averaging processes in periodic media, vol. 36 of Mathematics and its Applications (Soviet Series), Kluwer Academic Publishers Group, Dordrecht, 1989. View at MathSciNet
  24. E. Sanchez-Palencia and A. Zaoui, Homogenization techniques for composite media, vol. 272 of Lecture Notes in Physics, Springer-Verlag, Berlin, 1987. View at MathSciNet
  25. Y. Bansal and M.-J. Pindera, “Testing the predictive capability of the high-fidelity generalized method of cells using an efficient reformulation,” Tech. Rep., Testing the predictive capability of the high-fidelity generalized method of cells using an efficient reformulation. Report Number, NASA/CR-2004, 2004. View at Google Scholar
  26. S. M. Arnold, B. A. Bednarcyk, and J. Aboudi, “Comparison of the computational efficiency of the original versus reformulated high-fidelity generalized method of cells,” Report Number:NASA/TM-2004-213438, 2004. View at Google Scholar
  27. J. N. Reddy, An introduction to nonlinear finite element analysis---with applications to heat transfer, fluid mechanics, and solid mechanics, Oxford University Press, Oxford, Second edition, 2015. View at MathSciNet
  28. A. Mendelson, Plasticity: Theory and application, Macmillan, New York, 1968.
  29. B. A. Bednarcyk, J. Aboudi, and S. M. Arnold, “The equivalence of the radial return and Mendelson methods for integrating the classical plasticity equations,” Computational Mechanics, vol. 41, no. 5, pp. 733–737, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. L. Sirovich, “Turbulence and the dynamics of coherent structures,” Quarterly of Applied Mathematics, vol. 45, no. 3, pp. 561–590, 1987. View at Publisher · View at Google Scholar · View at MathSciNet
  31. A. S. Kaddour, M. J. Hinton, P. A. Smith, and S. Li, “Mechanical properties and details of composite laminates for the test cases used in the third world-wide failure exercise,” Journal of Composite Materials, vol. 47, no. 20-21, pp. 2427–2442, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. D. A. Şerban, G. Weber, L. Marşavina, V. V. Silberschmidt, and W. Hufenbach, “Tensile properties of semi-crystalline thermoplastic polymers: Effects of temperature and strain rates,” Polymer Testing, vol. 32, no. 2, pp. 413–425, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. T. McNally, W. R. Murphy, C. Y. Lew, R. J. Turner, and G. P. Brennan, “Polyamide-12 layered silicate nanocomposites by melt blending,” Polymer Journal, vol. 44, no. 9, pp. 2761–2772, 2003. View at Publisher · View at Google Scholar · View at Scopus
  34. P. Murthy and E. J. Pineda, “Tool for generation of MAC/GMC representative unit cell for CMC/PMC analysis,” Report Number:NASA/TM-2016-219127, 2016. View at Google Scholar
  35. D. H. Allen and W. E. Haisler, Introduction to aerospace structural analysis, Wiley, New York, NY, USA, 1985.
  36. A. Radermacher, Proper orthogonal decomposition-based model reduction in nonlinear solid mechanics, Rheinisch-Westfälischen Technischen Hochschule Aachen University, 2014.
  37. J. Aboudi, M.-J. Pindera, and S. M. Arnold, “High-fidelity generalization method of cells for inelastic periodic multiphase materials,” Report Number:NASA/TM-2002-211469, 2002. View at Google Scholar
  38. E. J. Barbero, Finite element analysis of composite materials using abaqus, CRC Press, Boca Raton, FL, USA, 2013.