Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 6067391, 7 pages
https://doi.org/10.1155/2018/6067391
Research Article

Planning Method of Offset Spray Path for Patch considering Boundary Factors

1School of Mechanical Engineering, Yancheng Institute of Technology, Yancheng, Jiangsu 224051, China
2School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China

Correspondence should be addressed to Yong Zeng; moc.621@881gnohzgnez

Received 4 May 2018; Revised 8 July 2018; Accepted 24 July 2018; Published 6 August 2018

Academic Editor: Alessandro Gasparetto

Copyright © 2018 Yakun Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. V. Andulkar, S. S. Chiddarwar, and A. S. Marathe, “Novel integrated offline trajectory generation approach for robot assisted spray painting operation,” Journal of Manufacturing Systems, vol. 37, pp. 201–216, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. H. P. Chen and N. Xi, “Automated tool trajectory planning of industrial robots for painting composite surfaces,” The International Journal of Advanced Manufacturing Technology, vol. 35, no. 7, pp. 680–696, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Chen and N. Xi, “Automated robot tool trajectory connection for spray forming process,” Journal of Manufacturing Science and Engineering, vol. 134, no. 2, Article ID 021017, 9 pages, 2012. View at Publisher · View at Google Scholar
  4. B. Zhou, L. Qian, Z. Meng D, and X. Dai Z, “Path sorting optimization of painting robot based on ant colony algorithm,” Computer Engineering, vol. 38, no. 1, pp. 192–207, 2012. View at Google Scholar
  5. Z. Cai, T. Chen, C. Zeng et al., “A global approach to the optimal trajectory based on an improved ant colony algorithm for cold spray,” Journal of Thermal Spray Technology, vol. 25, no. 8, pp. 1631–1637, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. P. Zhang, J. Gong, H. Ning, Y. Zeng, Y. Liu, and L. Wei, “Study on trajectory combination and connection problems of spray-painting robot for large curvature combination surfaces,” Journal of Sichuan University (Engineering Science Edition), vol. 48, no. 4, pp. 217–222, 2016. View at Google Scholar · View at Scopus
  7. Z. Cai, H. Liang, S. Quan, S. Deng, C. Zeng, and F. Zhang, “Computer-Aided Robot Trajectory Auto-generation Strategy in Thermal Spraying,” Journal of Thermal Spray Technology, vol. 24, no. 7, pp. 1235–1245, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. A. V. Mayur and C. S. Shital, “Incremental approach for trajectory generation of spray painting robot,” Industrial Robot, vol. 42, no. 3, pp. 228–241, 2015. View at Google Scholar
  9. A. Kout and H. Müller, “Tool-adaptive offset paths on triangular mesh workpiece surfaces,” Computer-Aided Design, vol. 50, pp. 61–73, 2014. View at Publisher · View at Google Scholar
  10. D.-A. Zhao, W. Chen, and Y. Tang, “Trajectory optimization of robotic spray painting for complex curved surfaces,” Journal of Jiangsu University (Natural Science Edition), vol. 28, no. 5, pp. 425–429, 2007. View at Google Scholar · View at Scopus
  11. Y. Zeng, J. Gong, N. Xu, L. Zheng, and S. Zhao, “Revised methods of tool trajectory parameters in path combination optimization for a spray painting robot,” China Mechanical Engineering, vol. 25, no. 6, pp. 836–841, 2014. View at Google Scholar · View at Scopus
  12. W. Sheng, H. Chen, N. Xi, and Y. Chen, “Tool path planning for compound surfaces in spray forming processes,” IEEE Transactions on Automation Science and Engineering, vol. 2, no. 3, pp. 240–249, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Y. Liu and T. R. Liu, “An algorithm for minimal circumscribed rectangle of a simple polygon,” Journal of Harbin University of Science and Technology, vol. 13, no. 2, pp. 5–7, 2008. View at Google Scholar