Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2018, Article ID 7527402, 12 pages
https://doi.org/10.1155/2018/7527402
Research Article

Axial Force Analysis and Roll Contour Configuration of Four-High CVC Mill

1Heavy Machinery Engineering Research Center of the Ministry of Education, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China
2College of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China

Correspondence should be addressed to Yu-gui Li; moc.361@8002iuguyil

Received 24 July 2017; Accepted 14 September 2017; Published 4 January 2018

Academic Editor: Marco Pizzarelli

Copyright © 2018 Guang-ming Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Guang-ming Liu, Yu-gui Li, Qing-xue Huang, and Xia Yang, “Axial Force Analysis and Roll Contour Configuration of Four-High CVC Mill,” Mathematical Problems in Engineering, vol. 2018, Article ID 7527402, 12 pages, 2018. https://doi.org/10.1155/2018/7527402.