Research Article
Feature Preserving Filling of Holes on Point Sampled Surfaces Based on Tensor Voting
Table 3
The distances from repair points to the original surface.
| type | Hole Maximum(mm) | Average(mm) | Davis et al. | Centin et al. | Our method | Davis et al. | Centin et al. | Our method |
| I | 0.19 | 0.00 | 0.00 (σ = 0.3) | 0.14 | 0.00 | 0.00 (σ = 0.3) | II | 0.21 | 0.07 | 0.15 (σ = 0.2) | 0.04 | 0.03 | 0.04 (σ = 0.2) | III | 0.33 | 0.87 | 0.01 (σ = 0.3) | 0.05 | 0.60 | 0.00 (σ = 0.3) | IV | 0.52 | 0.96 | 0.25 (σ = 0.3) | 0.06 | 0.43 | 0.03 (σ = 0.3) | V | 1.10 | 2.20 | 0.14 (σ = 0.2) | 0.13 | 0.88 | 0.02 (σ = 0.2) |
|
|