Research Article
Prediction of Surface Roughness and Optimization of Cutting Parameters of Stainless Steel Turning Based on RSM
Table 6
Experimental verification of model reliability.
| Serial number | (m/min) | (mm) | (mm/r) | Roughness of test (μm) | Predicted roughness (μm) | Relative error/% |
| 1 | 75 | 0.09 | 0.3 | 2.836 | 2.675 | 6% | 2 | 85 | 0.11 | 0.4 | 2.605 | 2.756 | 5.5% | 3 | 92 | 0.12 | 0.2 | 2.121 | 2.247 | 5.6% | 4 | 96 | 0.15 | 0.3 | 2.544 | 2.380 | 6.9% | 5 | 113 | 0.1 | 0.6 | 2.748 | 2.605 | 5.5% | 6 | 124 | 0.13 | 0.5 | 2.454 | 2.599 | 5.6% | 7 | 143 | 0.14 | 0.6 | 2.38 | 2.557 | 6.9% | 8 | 117 | 0.13 | 0.4 | 2.409 | 2.53 | 4.8% | 9 | 112 | 0.16 | 0.2 | 1.89 | 1.92 | 3% | 10 | 128 | 0.12 | 0.5 | 2.41 | 2.596 | 7 % |
|
|